Initiation mechanisms in copolymerization: Reaction of t-butoxyl radicals with co-monomers ethyl vinyl ether and methyl methacrylate

The radical trapping technique employing 1,1,3,3-tetramethyl-1,3-dihydro-1H-isoindol-2-yloxyl as a scavenger has been used to investigate the reaction of t-butoxyl radicals with mixtures of ethyl vinyl ether and methyl methacrylate. The range of identified products includes those from both addition and hydrogen abstraction with both monomers, head addition with ethyl vinyl ether, and some second monomer addition products. Relative rate constants have been obtained for various pairs of constituent reactions. t-Butoxyl radicals add to ethyl vinyl ether one to two times faster than to methyl methacrylate, depending on which monomer is in excess. The ratio is less than 1 in nonolefinic solvents and as high as 6 in t-butanol. This solvent effect is thought to be due to the radicals complexing to either methyl methacrylate or t-butanol (H-bonding), thereby increasing its electrophilic character. © 1997 John Wiley & Sons, Inc.     

Determination of the Pesticide Fenbutatin Oxide in Tomatoes,Cucumbers and Bananas by High Performance Liquid Chromatographic/Atmospheric Pressure Chemical Ionization-Mass Spectrometry

A rapid method, using high-performance liquid chromatography (HPLC)/atmospheric pressure chemical ionization-mass spectrometry, has been developed for the determination of fenbutatin oxide in tomatoes, cucumbers and bananas. Samples were homogenized with sodium carbonate and ethyl acetate, filtered through sodium sulphate, concentrated and solvent exchanged into acetonitrile prior to analysis. HPLC was performed on a Hypercarb column with 10:90 acetic acid (5% v/v glacial acetic acid in water)/acetonitrile at a flow rate of 1 mL/min. Positive ionization selected-ion monitoring was performed on the 7 isotopic cluster ions from the tris(2-methyl-2-phenylpropyl) tin fragment. A comparison of solvent-based and extract-based standards showed that tomato and cucumber matrices had a slight enhancement effect on the signal intensity, whereas the banana matrix exerted a signal suppression effect. Calibration was linear over the range 0.25–5.0 ng/μL. The mean spike recoveries (extracts spiked at 0.5 mg/kg) were 88% for tomatoes and 80% for both cucumbers and bananas with relative standard deviations of 6%, 7% and 8% respectively. Limits of detection were commodity dependent and ranged from 0.06–0.12 ng/μL (equivalent to 0.01–0.02 mg/kg in the crop). Ionization was stable for long analytical time periods. © 1997 Crown Copyright     

Measuring internal electric fields in organic light-emitting diodes using electroabsorption spectroscopy

A widely applicable electroabsorption technique to measure internal electric fields in organic light-emitting diodes is presented. The technique exploits the change in the a.c. electroabsorption response in the presence of a d.c. electric field. The electroabsorption signal is modulated at the fundamental frequency of the a.c. test signal, in addition to the usual modulation at the second harmonic frequency, when a d.c. bias is present. In metal/organic film/metal devices employing different metal contacts there is a built-in electric field in the organic film caused by the difference in work function between the two contacts. The electroabsorption response at the fundamental frequency of the applied a.c. bias is measured as a function of an external d.c. bias. The electroabsorption signal is nulled when the applied d.c. bias cancels the built-in electric field established by the different metals. We apply this technique to measure changes in metal–polymer Schottky barrier heights as a function of the contact metal. In metal/multiple organic films/metal structures the electroabsorption signals from the constituent organic films are identified spectroscopically and measured at both the fundamental and second harmonic frequency of the a.c. test signal. The amplitudes of the electroabsorption responses are then used to determine the a.c. and d.c. electric fields present in the organic layers. We apply this technique to determine the d.c. electric field distribution within a multi-layer organic light-emitting diode. These results highlight the general applicability of electroabsorption methods to probe internal electric fields in organic light-emitting diodes. © 1997 John Wiley & Sons, Ltd.     

Photophysics of carbazole-containing systems. 1. Dilute solution behavior of poly(N-vinyl carbazole) and N-vinyl carbazole/methyl acrylate copolymers

Steady-state and time-resolved fluorescence techniques have been used to study the photophysical behaviors of poly(N-vinyl carbazole), PNVCz and a series of N-vinyl carbazole-methyl acrylate (NVCz-co-MA) copolymers in dilute solution as a function of both NVCz composition and temperature. A kinetic scheme, intended to describe intramolecular excimer formation across the entire NVCz composition range, is proposed. In low aromatic content copolymers, two monomer species (unquenched and quenched monomer) and two excimer species (the sandwich-like excimer and a higher energy excimer) exist. The contribution from monomer emission to the overall fluorescence decreases with increasing NVCz content through increased excimer formation: this is likely to be consequent upon (1) an increase in the number of excimer forming sites, and (2) increasing efficiency of energy transfer from the excited monomers to the excimer forming sites. In the homopolymer, PNVCz, the only emission that can be observed on a nanosecond timescale is excimeric. This fluorescence appears to originate from three excimer species (the sandwich-like excimer, and two higher energy forms). For the homopolymer, the current observations are consistent with the model proposed by Vandendriessche and De Schryver [Polym. Photochem. 7 , 153 (1986)]. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 963–978, 1997     

Hydrostatic extrusion of polyethylene filled with hydroxyapatite

The hydrostatic extrusion of polyethylene filled with hydroxyapatite has been studied. It is shown that the extrusion behavior is qualitatively similar to that of unfilled polymer. Extruded products with flexural moduli of at least 10 GPa and flexural strengths of 90 MPa have been produced, which can be considered as candidates for load-bearing bone substitute materials. © 1997 John Wiley & Sons, Ltd.     

1‐(4‐Chloro­phenyl­sulfanyl)‐2‐nitro‐4‐(tri­fluoro­methyl)­benzene and 1‐(4‐chloro­phenyl­sulfanyl)‐4‐nitro‐2‐(tri­fluoro­methyl)­benzene

Two chemical isomers of 3‐nitro­benzotrifluoride, namely 1‐(4‐chloro­phenyl­sulfanyl)‐2‐nitro‐4‐(tri­fluoro­methyl)­benzene, C₁₃H₇ClF₃NO₂S, (I), and 1‐(4‐chloro­phenyl­sulfanyl)‐4‐nitro‐2‐(tri­fluoro­methyl)­benzene, C₁₃H₇ClF₃NO₂S, (II), have been prepared and their crystal structures determined with the specific purpose of forming a cocrystal of the two. The two compounds display a similar conformation, with dihedral angles between the benzene rings of 83.1 (1) and 76.2 (1)°, respectively, but (I) packs in P while (II) packs in P2₁/c, with C—H⋯O interactions. No cocrystal could be formed, and it is suggested that the C—H⋯O associations in (II) prevent intermolecular mixing and promote phase separation.     

Tetraphenylarsonium iodide,a new determination

The reported crystal structures of Ph₄P⁺·I⁻ and Ph₄As⁺·I⁻ have been re‐examined. An apparent instance of substitutional dimorphism could not be reproduced and, contrary to an earlier report, tetra­phenyl­arsonium iodide, [As(C₆H₅)₄]I or Ph₄As⁺·I⁻, was found to be isostructural with the phosphorus compound. The cation and anion are both located on symmetry sites. The crystal packing involves linear chains of cations in fourfold phenyl embraces.     

Domain structure and interphase dimensions in poly(urethaneurea) elastomers using DSC and SAXS

Small‐angle X‐ray scattering (SAXS) and differential scattering calorimetry (DSC) were used to demonstrate distinct differences in domain size, phase separation, and hydrogen bonding in a series of segmented urethaneurea elastomers prepared from isocyanate‐terminated prepolymers and aromatic diamine chain extenders. Two types of prepolymers were studied. The first contained a broadly polydisperse high molecular mass oligomer with relatively high levels of free isocyanate monomer. The second type of prepolymer contained low levels of high molecular mass oligomers with mass fractions greater than 90% of the two‐to‐one adduct of toluene diisocyanate (TDI) to polytetramethylene glycol (PTMEG). The mass fraction of the residual unreacted diisocyanate was less than 0.1% in the second type. Two chain extenders, 4,4′‐methylene bis‐(2‐chloroaniline)(Mboca) and 4,4′‐methylene bis‐(3‐chloro‐2,6‐diethylaniline) (MCDEA), were used to convert the prepolymers to poly(urethaneurea) elastomers. Materials prepared from the prepolymers with low oligomer polydispersity exhibited smaller hard segment domains with more ordered morphology, greater phase separation, and more hydrogen bonding than those prepared from prepolymers with high oligomer polydispersity. These tendencies were enhanced in those elastomers prepared by chain extension with MCDEA compared to those made with Mboca. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2586–2600, 1999