Forces between mica surfaces, prepared in different ways, across aqueous and nonaqueous liquids confined to molecularly thin films

We have measured normal and lateral interactions across a range of different liquids between mica surfaces using a surface force balance (SFB). The mica surfaces were prepared either by melt cutting using Pt wire and standard procedures in our laboratories or by tearing sheets (that had not been exposed to Pt) off from a freshly cleaved sheet of mica. AFM micrographs revealed the substantial absence of Pt nanoparticles on the melt cut and torn-off mica surfaces. Normal-force versus surface-separation (D) profiles and shear force versus D measurements for purified water (no added salt), for concentrated aqueous NaCl solutions, and for cyclohexane revealed that in all cases the behavior of the highly confined liquids between melt-cut and between torn-off mica sheets was identical within experimental scatter. These results demonstrate directly that interactions measured between melt-cut mica surfaces as routinely prepared using established procedures in our laboratories and in other laboratories are free of the effect of any Pt contamination.     

Molecular structures of arachno-decaborane derivatives 6,9-X2B8H10 (X = CH2, NH, Se) including a gas-phase electron-diffraction study of 6,9-C2B8H14

The molecular structures of the three heterodecaboranes arachno-6,9-C2B8H14, arachno-6,9-N2B8H12, and arachno-6,9-Se2B8H10 have been determined by ab initio MO theory. In addition, the structure of arachno-6,9-C2B8H14 was experimentally determined using gas-phase electron diffraction (GED). The accuracy of all four of these structures has been confirmed by the good agreement of the (11)B chemical shifts calculated at the GIAO-MP2 level with the experimental values. A comparison of the GIAO-HF and GIAO-MP2 methods shows that for these heteroborane clusters, electron correlation effects on the computed delta((11)B) values are quite substantial and that it is necessary to go beyond the HF level in the NMR computation.     

Cooling overall spin temperature: protein NMR experiments optimized for longitudinal relaxation effects

In experiments performed on protonated proteins at high fields, 80% of the NMR spectrometer time is spent waiting for the ¹H atoms to recover their polarization after recording the free induction decay. Selective excitation of a fraction of the protons in a large molecule has previously been shown to lead to faster longitudinal relaxation for the selected protons [K. Pervushin, B. Vögeli, A. Eletsky, Longitudinal ¹H relaxation optimization in TROSY NMR spectroscopy, J. Am. Chem. Soc. 124 (2002) 12898–12902; P. Schanda, B. Brutscher, Very fast two-dimensional NMR spectroscopy for real-time investigation of dynamic events in proteins on the time scale of seconds, J. Am. Chem. Soc. 127 (2005) 8014–8015; H.S. Attreya, T. Szyperski, G-matrix Fourier transform NMR spectroscopy for complete protein resonance assignment, Proc. Natl. Acad. Sci. USA 101 (2004) 9642–9647]. The pool of non-selected protons acts as a “thermal bath” and spin-diffusion processes (“flip-flop” transitions) channel the excess energy from the excited pool to the non-selected protons in regions of the molecule where other relaxation processes can dissipate the excess energy. We present here a sensitivity enhanced HSQC sequence (COST-HSQC), based on one selective E-BURP pulse, which can be used on protonated ¹⁵N enriched proteins (with or without ¹³C isotopic enrichment). This experiment is compared to a gradient sensitivity enhanced HSQC with a water flip-back pulse (the water flip-back pulse quenches the spin diffusion between ¹H^N and ¹H^α spins). This experiment is shown to have significant advantages in some circumstances. Some observed limitations, namely sample overheating with short recovery delays and complex longitudinal relaxation behaviour are discussed and analysed.     

Influence of Rare Earth Ho3+ Doping on Structural,Microstructure and Magnetic Properties of ZnO Bulk and Thin Film Systems

We have investigated the doping behavior of rare earth element holmium (Ho³⁺) in ZnO semiconductor. The structural, microstructure, and magnetic properties of Zn_1-xHo_xO (x=0.0, 0.04, and 0.05) thin films deposited on Si(100) substrate by thermal evaporation technique were studied. The ceramic targets were prepared by conventional solid state ceramic technique. The pallets used as target were final sintered at 900 oC in the presence of N2 atmosphere. The experimental results of X-ray diffraction (XRD) spectra, surface morphology, and magnetic properties show that the Ho³⁺ doped ZnO thin films has a strong influence on the materials properties. The higher angle shift in peak position and most preferred (101) orientation were observed in XRD pattern. These spectra confirmed the substitution of Ho3+ in ZnO lattice. The surface morphology and stoichiometry for both bulk and thin films were analyzed by scanning electron microscopy and energy dispersive spectroscopy. It was observed that grain size decreases with the increase of Ho³⁺. Room temperature ferromagnetism was observed for Zn_0.95Ho_0.05O films. The ferromagnetism might be attributed to the substitution of Ho ions for Zn²⁺ in ZnO lattices.     

Random benzotrithiophene-based donor-acceptor copolymers for efficient organic photovoltaic devices

A series of benzotrithiophene-containing random terpolymers for polymer solar cells is reported. Through variations of the two other components in the terpolymers, the absorption profile and the frontier energy levels are optimized and maximum power conversion efficiencies are nearly doubled (5.14%) relative to the parent alternating copolymer.     

Synthesis of novel thieno[3,2-b]thienobis(silolothiophene) based low bandgap polymers for organic photovoltaics

Thieno[3,2-b]thienobis(silolothiophene), a new electron rich hexacyclic monomer has been synthesized and incorporated into three novel donor-acceptor low-bandgap polymers. By carefully choosing the acceptor co-monomer, the energy levels of the polymers could be modulated and high power conversion efficiencies of 5.52% were reached in OPV devices.     

Germaindacenodithiophene based low band gap polymers for organic solar cells

We report the first synthesis of a fused germaindacenodithiophene monomer and its polymerisation with 2,1,3-benzothiadiazole by Suzuki polycondensation. The resulting polymer, PGeTPTBT, is semicrystalline, despite the presence of four bulky 2-ethylhexyl groups. Blends with P(70)CBM afford solar cells with efficiencies of 5.02%.     

Rate equation modelling of erbium luminescence dynamics in erbium-doped silicon-rich-silicon-oxide

Erbium doped silicon-rich silica offers broad band and very efficient excitation of erbium photoluminescence (PL) due to a sensitization effect attributed to silicon nanocrystals (Si-nc), which grow during thermal treatment. PL decay lifetime measurements of sensitised Er³⁺ ions are usually reported to be stretched or multi exponential, very different to those that are directly excited, which usually show a single exponential decay component.In this paper, we report on SiO₂ thin films doped with Si-nc's and erbium. Time resolved PL measurements reveal two distinct 1.54 μm Er decay components; a fast microsecond component, and a relatively long lifetime component (10 ms). We also study the structural properties of these samples through TEM measurements, and reveal the formation of Er clusters. We propose that these Er clusters are responsible for the fast μs decay component, and we develop rate equation models that reproduce the experimental transient observations, and can explain some of the reported transient behaviour in previously published literature.     

On the Potts Model Partition Function in an External Field

We study the partition function of the Potts model in an external (magnetic) field, and its connections with the zero-field Potts model partition function. Using a deletion-contraction formulation for the partition function Z for this model, we show that it can be expanded in terms of the zero-field partition function. We also show that Z can be written as a sum over the spanning trees, and the spanning forests, of a graph G. Our results extend to Z the well-known spanning tree expansion for the zero-field partition function that arises though its connections with the Tutte polynomial.