Laser diagnostics of nanoscale dielectric films on absorbing substrate by differential reflectivity and ellipsometry

The differential reflection characteristics for ultrathin inhomogeneous dielectric film on absorbing substrate are investigated in the long-wavelength approximation. The obtained first-order expressions for differential reflectivity and changes in the ellipsometric angles caused by ultrathin layer are of immediate interest to the solution of the inverse problem. The method to determine the averaged values (not the realistic profile) of refractive index for inhomogeneous nanometric films are shown. The novel possibilities for determining the dielectric constant and thickness of nanoscale homogeneous films by the differential ellipsometric and reflectivity measurements are developed, and a simple method to estimate whether the nanometric film is homogeneous or not is also discussed.     

A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre composites

The results of an extensive experimental study of the free running Nd:YAG laser drilling of a multi-layer carbon fibre composite, where adjacent layers have differently orientated fibres, are reported. For holes drilled with the laser operating in fixed-Q mode at 1064 nm, parallel sections of blind holes illustrating discontinuities in the hole size along a given section direction will be shown to occur at the interface between adjacent layers. An explanation for this effect is proposed. Detailed single pulse drilling characteristics will be presented illustrating the exit hole diameter as a function of pulse energy and material thickness. These characteristics illustrate a ‘stable' drilling regime in which the exit hole diameters are least sensitive to changes in pulse energy or material thickness and a less ‘stable' regime in which they are more strongly dependent on these parameters. Drilling characteristics will be given for two different beam qualities, illustrating the greater drilling depth and reduced hole size achievable with an improved beam quality. Finally holes drilled through a 2 mm thick sample of material with multiple pulses are considered. Size distribution curves for entrance and exit holes will be presented. The total energy required (number of pulses × pulse energy) to drill through 2 mm thick material will be reported as a function of pulse energy in stationary air and argon atmospheres and in a partial vacuum, illustrating a threshold energy which is dependent upon the drilling atmosphere. The threshold energies will be discussed with reference to plasma formation and the reactivity of the drilling atmosphere.     

Dynamic reflection holograms in CdF2 crystals with bistable centers

The diffraction efficiency and the recording and relaxation times of dynamic reflection holograms, recorded in CdF₂ crystals with bistable centers are studied experimentally in the temperature range 20–100°C. In the model experiments which measured the quality of the wave reflected from the hologram, the dynamic wavefront distortions are demonstrated to be efficiently compensated using a holographic corrector based on these crystals. CdF₂ crystals with bistable centers are likely to be useful in solving problems of correction of laser light wavefront and image correction in observation telescopes with nonideal primary mirrors.     

Lateral interactions in the thermal desorption of H2 from clean Cu/Ni(110) alloy surfaces

The adsorption of hydrogen on a clean Cu10%/Ni90% (110) alloy single crystal was studied using flash desorption spectroscopy (FDS), Auger electron spectroscopy (AES), and work function measurements. Surface compositions were varied from 100% Ni to 35% Ni. The hydrogen chemisorption on a-surface of 100% nickel revealed strong attractive interactions between the hydrogen atoms in accordance with previous work on Ni(100). Three desorption states (β₁, β₂ and α) appeared in the desorption spectra. The highest temperature (α) state was occupied only after the initial population of the β₂-state. As the amount of copper was increased in the nickel substrate, desorption from the higher energy binding α-state was reduced, indicating a decrease in the attractive interactions among hydrogen atoms. The hydrogen coverage at saturation was not affected by the addition of copper to the nickel substrate until the copper concentration was greater than 25% at which a sharp reduction in saturation coverage occurred. This phenomenon was apparently due to the adsorption of hydrogen on Ni atoms followed by occupation of NiNi and CuNi bridged adsorption sites, while occupation of CuCu sites was restricted due to an energy barrier to migration.     

A method for computing the IR radiation of molecular gas jets in the volume approximation

Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 55, No. 3, pp. 478–484, September, 1991.     

Rb saturation spectroscopy with an optically narrowed FM diode laser

A fast-frequency modulated (FM) diode laser has been optically narrowed using the technique of resonant optical feedback, to provide linewidths in each FM mode of ≈ 200 kHz peak-to-peak. With a drive frequency of 50 MHz and modulation index of 0.2, the FM laser has been used for the first time to obtain Doppler-free FM spectra of the Rb D₁ line at 795 nm. The potential use of this system for laser frequency stabilisation is discussed.     

Evaluation of integrals and the mellin transform

Translated from Itogi Nauki i Tekhniki, Seriya Matematicheskii Analiz, Vol. 27, pp. 3–146, 1989.     

Thermal emission spectrum from a semiconductor electron-hole plasma

Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 55, No. 4, pp. 624–629, October, 1991.     

Comparisons between model equations for long waves

Summary Considered here are model equations for weakly nonlinear and dispersive long waves, which feature general forms of dispersion and pure power nonlinearity. Two variants of such equations are introduced, one of Korteweg-de Vries type and one of regularized long-wave type. It is proven that solutions of the pure initial-value problem for these two types of model equations are the same, to within the order of accuracy attributable to either, on the long time scale during which nonlinear and dispersive effects may accumulate to make an order-one relative difference to the wave profiles.This research was supported in part by the National Science Foundation. A considerable portion of the project was completed while the first author was resident at the Institute for Mathematics and Its Applications, University of Minnesota.