Effect of the Parameters of Three-Mirror Resonators on the Spectral Characteristics of Single-Pulse Laser Generation with Self-Injection of Priming Radiation

Based on a semiclassical theory, investigations were made of the dynamics and spectral composition of pulsed generation with self-injection of priming radiation from the active part of a three-mirror linear resonator, the passive part of which contains an active loss modulator and serves as the output reflector of the laser. It is shown that there exists a range of resonator parameters at which pulsed lasing has virtually a single frequency irrespective of the detuning of the frequencies of the priming radiation and of the nearest eigenmode of the composite resonator. Considering graphically the phase conditions of generation, it is established that among pulsed lasers with self-injection of priming radiation which are constructed on the basis of three-mirror linear and branched resonators, the most efficient for creating single-frequency generation are those in which the length of the main resonator, where generation of the pulse occurs, is larger than the length of the additional one intended for forming the priming radiation. With an inverse ratio of the lengths of the resonators, the conditions of single-frequency pulsed generation becomes dependent on the priming radiation frequency.     

Interlaboratory comparisons and improvements of methods for acid number determination in used motor oils

The results of two interlaboratory comparisons of acid number determinations in used motor oils are discussed. It is shown that the comparability of the measurement results is not as good as that required by known standards for petroleum products. The problem is motor oil contaminants which accumulated during use, and which are the source of a matrix effect in the acid number determination. The standard methods’ drawbacks are analyzed and some improvements are proposed. Repeatability and accuracy of the improved methods are evaluated. Received: 11 December 2001 Accepted: 15 February 2002     

Velocity measurements in liquid sodium by means of ultrasound Doppler velocimetry

A successful application of ultrasound Doppler velocimetry in liquid sodium flows is described. To obtain sufficient Doppler signals, different problems had to be solved: the transmission of the ultrasonic beam through the channel wall made of stainless steel, the acoustic coupling between the transducer and the channel wall, and the wetting of the inner surface of the wall by the liquid metal, respectively. A sodium flow in a square duct exposed to a transverse magnetic field is investigated. In accordance with the existing knowledge about MHD channel flows, we found that the velocity profiles modified to a M-shape owing to the effect of an inhomogeneous magnetic field. Received: 12 June 2001/Accepted: 27 October 2001     

Extrusion of pastes with a piston extruder for the determination of the local solid and fluid concentration, the local porosity and saturation and displacement profiles by means of NMR imaging

 Nuclear Magnetic Resonance (NMR) was used to investigate the extrusion behaviour of PTFE pastes in a ram extruder. By means of ¹H-NMR imaging (MRI) it is possible to determine the local proton density and therefore, the local fluid concentration. The ¹⁹F-MRI provides the local solid concentration. Thus the local saturation and the local porosity can be calculated with the information of the local fluid and solid concentration. Furthermore displacement profiles can be derived from NMR images by means of correlation techniques without any preparation or marking of the pastes. Received: 8 May 2000   Accepted: 1 May 2001     

Unconditional Bases, the Matrix Muckenhoupt Condition, and Carleson Series in a Spectrum

Two families of functions constructed by a system of n scalar Muckenhoupt weights are studied. Criteria are given under which these families are unconditional bases. From the point of view of the spectral operator theory, the problem is reduced to the study of the structure of n-dimensional perturbations of the integration operator. Weighted estimates for the Hilbert transform in the spaces of vector-functions are applied to construct an operator mapping functions of the studied families to vector-valued rational functions. The concept of the Carleson series is used in the study of the following problem: when do vector-valued rational functions form an unconditional basis? Bibliography: 8 titles.     

Numerical solutions of the shallow water equations with discontinuous bed topography

A simple scheme is developed for treatment of vertical bed topography in shallow water flows. The effect of the vertical step on flows is modelled with the shallow water equations including local energy loss terms. The bed elevation is denoted with z_b^‐ for the left and z_b⁺ for the right values at each grid point, hence exactly representing a discontinuity in the bed topography. The surface gradient method (SGM) is generalized to reconstruct water depths at cell interfaces involving a vertical step so that the fluxes at the cell interfaces can accurately be calculated with a Riemann solver. The scheme is verified by predicting a surge crossing a step, a tidal flow over a step and dam‐break flows on wet/dry beds. The results have shown good agreements compared with analytical solutions and available experimental data. The scheme is efficient, robust, and may be used for practical flow calculations. Copyright © 2002 John Wiley & Sons, Ltd.     

Effect of trapping centers of luminescent properties of bismuth orthogermanate

Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 54, No. 6, pp. 970–975, June, 1991.