Hydrogen transport through Pd-Ni alloy electrodeposited on Pd substrate

Hydrogen transport through a Pd-Ni alloy electrodeposited on a Pd substrate (Pd-Ni/Pd bilayer symmetric electrode) has been investigated using cyclic voltammetry and a.c. impedance spectroscopy combined with the electrochemical hydrogen permeation method. The permeation build-up current transients and the measured impedance spectra were analyzed using the time-lag method for the bilayer electrode and a complex non-linear least squares data-fitting method based upon the derived Faradaic admittance for the hydrogen absorption into and diffusion through the bilayer electrode under the permeable boundary condition, respectively. The value of the hydrogen diffusivity in the Pd-Ni layer was lower than that in the Pd layer. Furthermore, the values of the charge transfer resistance and equilibrium absorption constant for the Pd-Ni/Pd bilayer electrode were higher than those for the Pd single layer electrode. From the experimental results, the role of the thin Ni(OH)₂ film formed on the Pd-Ni layer surface in the hydrogen transport through the Pd-Ni/Pd bilayer electrode is discussed in terms of its passivating effect and extremely large hydrogen solubility. Received: 22 January 1997 / Accepted: 15 April 1997     

Superprotonic Conductivity of MOFs Confining Zwitterionic Sulfamic Acid as Proton Source and Conducting Medium

A few metal–organic frameworks (MOFs), which typically use strong acids as proton sources, display superprotonic conductivity (≈10⁻¹ S cm⁻¹); however, they are rare due to the instability of MOFs in highly acidic conditions. For the first time, we report superprotonic conductivity using a moderately acidic guest, zwitterionic sulfamic acid (HSA), which is encapsulated in MOF-808 and MIL-101. HSA acts not only as a proton source but also as a proton-conducting medium due to its extensive hydrogen bonding ability and zwitterion effect. A new sustained concentration gradient method results in higher HSA encapsulation compared to conventional methods, producing 10HSA@MOF-808-(bSA)₂ and 8HSA@MIL-101. These MOFs show impressive superprotonic conductivity of 2.47×10⁻¹ and 3.06×10⁻¹ S cm⁻¹, respectively, at 85 °C and 98 % relative humidity, and maintain stability for 7 days.     

Hexaazatriphenylene-Based Two-Dimensional Conductive Covalent Organic Framework with Anisotropic Charge Transfer

The development of covalent organic frameworks (COFs) with efficient charge transport is of immense interest for applications in optoelectronic devices. To enhance COF charge transport properties, electroactive building blocks and dopants can be used to induce extended conduction channels. However, understanding their intricate interplay remains challenging. We designed and synthesized a tailor-made COF structure with electroactive hexaazatriphenylene (HAT) core units and planar dioxin (D) linkages, denoted as HD-COF. With the support of theoretical calculations, we found that the HAT units in the HD-COF induce strong, eclipsed π–π stacking. The unique stacking of HAT units and the weak in-plane conjugation of dioxin linkages leads to efficient anisotropic charge transport. We fabricated HD-COF films to minimize the grain boundary effect of bulk COFs, which resulted in enhanced conductivity. As a result, the HD-COF films showed an electrical conductivity as high as 1.25 S cm⁻¹ after doping with tris(4-bromophenyl)ammoniumyl hexachloroantimonate.     

An Iron-Free Magnetron-Injection-Gun for a 28GHz, 200kW Gyroklystron Amplifier

A design study of a double-anode magnetron-injection-gun is performed to incorporate the electron gun into a high power 28GHz gyroklystron amplifier operating at 70kV and 8.2A. The electron gun is designed to be used in a tapered magnetic field in the cathode region produced from an iron-free superconducting magnet. An electron trajectory code predicts a beam axial velocity spread of 5.9% at = 1.5, 70kV, 8.2A and 10.4kG, which is a high quality electron beam suitable for the high gain, high efficiency, five-cavity gyroklystron amplifier. The successful design of the high quality electron gun is attributed to a longer gap between the modulating anode and the grounded anode compared with the case of the first 28GHz electron gun built with an iron enclosed electromagnet.     

Single-mode plane-polarized ytterbium-doped large-core fiber laser with 633-W continuous-wave output power

We demonstrate a cladding-pumped single-mode plane-polarized ytterbium-doped fiber laser generating 633 W of continuous-wave output power at 1.1 microm with 67% slope efficiency and a polarization extinction ratio better than 16 dB. The laser is end pumped through both fiber ends and shows no evidence of roll-over, even at the highest output power, which is limited only by the available pump power.     

Efficient inverse radiation analysis in a cylindrical geometry using a combined method of hybrid genetic algorithm and finite-difference Newton method

An inverse radiation problem was considered to estimate boundary conditions such as temperature distribution and emissivity in axisymmetric absorbing, emitting, and scattering medium, given the measured incident radiative heat fluxes. The finite-volume method was employed to solve a direct radiative transfer equation for a two-dimensional axisymmetric geometry. Various parameter estimators, such as conjugate-gradient method, hybrid genetic algorithm, and finite-difference Newton method, were employed to solve the inverse problems, while discussing their performances in terms of estimation accuracy and computational efficiency. Based on this, we proposed, as a best inverse analysis tool, a new combined method that adopted the hybrid genetic algorithm as an initial value selector and used the finite-difference Newton method as a parameter estimator.     

Core/Shell Structured PCM Nanocapsules Obtained by Resin Fortified Emulsion Process

Phase change material (PCM, octadecane) nanocapsules were successfully prepared by resin fortified emulsion (RFE) polymerization using the alkali soluble resin (ASR) of poly(ethylene‐co‐acrylic acid) (EAA) and poly(styrene‐co‐acrylic acid) (SAA). Stable PCM nanocapsules were obtained by resin fortified emulsion polymerization, which could be attributed to the prevention of Ostwald ripening due to PCM being hydrophobic. Analysis of online FTIR measurements throughout the reaction confirmed that the nanocapsules contained octadecane as a PCM. TEM imaging of the PCM nanocapsules showed spherical and core/shell morphology. The characteristics of PCM nanocapsules can be controlled by process parameters. As a result, the particle size and particle size distribution (i.e., polydispersity index (Dw/Dn)) of the PCM nanocapsules were created by adjusting manufacturing conditions. The PCM nanocapsules exhibited thermal energy storage (～49.8 J/g) and release (～47.9 J/g) behavior.