Vibration characteristics of piezoelectric torsional transducers

The vibrational characteristics of Langevin-type torsional transducers, which consist of two piezoelectric torsional disks and two elastic blocks, are studied theoretically and experimentally in this paper. The differential equations of piezoelectric torsional motions are derived in terms of the circumferential displacement and the electric potential. Solutions of the boundary-value problem yield the natural frequencies and mode shapes of the transducers, and the natural frequencies are verified by comparing the numerical results with the experimental ones. The theoretical results enable one to quantitatively predict the effect of the elastic blocks on the reduction of the natural frequencies of a Langevin-type torsional transducer.     

Dynamic behavior analysis of cracked rotor

In the present study, the additional slope is used to consider the crack breathing, and is expressed explicitly in the equation of motion as one of the inputs to produce the bending moment at the crack position. Inversely, the additional slope is calculated by integrating on the crack region based on a fracture mechanics concept. The response of a cracked rotor is formulated based on the transfer matrix method. The transient behavior due to the crack breathing is considered by introducing a ‘moving’ Fourier-series expansion concept to the additional slope. The time-varying harmonic components of the additional slope are used to calculate the harmonic responses. The application considered is a general rotor model composed of multiple shafts, disks and cracks, and resilient bearings at both ends. Verification analysis is carried out for a simple rotor model similar to those found in the literature. Using the additional slope, the cracked rotor behavior is explained by the crack depth and rotation speed increase. It is shown that region on the crack front line having the dominant stress intensity factor value moves from the central area to both ends, as the crack depth increases. The result matches well with the crack propagation pattern shown in a bench mark test in the literature. Whirl orbits near the critical and sub-critical speed ranges of the rotor are discussed. It is shown that there exists some speed range near the critical speed, where the temporary whirl direction reversal and phase shift exist. When an unbalance is applied, the peculiar features, such as the whirl direction reversal and phase shift, disappear.     

A numerical study on the enhancement of heat transfer by pressure distributions in acoustic fields

The enhancement of heat transfer in a cavity was investigated in the absence of and in the presence of acoustic streaming induced by ultrasonic waves. The present study provides the experimental and numerical results of heat transfer in the acoustic fields. The enhancement of heat transfer was experimentally investigated in the presence of acoustic streaming and was compared with the profiles of acoustic pressure calculated by the numerical analysis. A coupled finite element-boundary element method (FE-BEM) was applied for a numerical analysis. Experimental and numerical studies clearly show that pressure variations are closely related to the enhancement of heat transfer in the acoustic fields.     

A molecular dynamics simulation study on resonance frequencies comparison of tunable carbon-nanotube resonators

We investigated tunable gigahertz-resonators, which is based on the application of a telescoped double-walled carbon-nanotube that can be used repeatedly and operate at a single frequency or have a relatively narrow frequency range, via classical molecular dynamics simulations of a double-walled carbon-nanotube. Two types of telescoped double-walled carbon-nanotube resonators were compared with each other; one was bridge-type and another was cantilever-type, and one side was connected to a position controller in order to achieve a telescoped carbon-nanotube. The frequency bandwidth of our cantilevered type design can exceed that of the bridged type. Our simulations showed that such a system can tune it up its resonance frequency by controlling the length of oscillating carbon-nanotube resonator.     

State-independent proof of Kochen-Specker theorem with 13 rays

Quantum contextuality, as proved by Kochen and Specker, and also by Bell, should manifest itself in any state in any system with more than two distinguishable states and recently has been experimentally verified. However, for the simplest system capable of exhibiting contextuality, a qutrit, the quantum contextuality is verified only state dependently in experiment because too many (at least 31) observables are involved in all the known state-independent tests. Here we report an experimentally testable inequality involving only 13 observables that is satisfied by all noncontextual realistic models while being violated by all qutrit states. Thus our inequality facilitates a state-independent test of the quantum contextuality for an indivisible quantum system. We also provide a record-breaking state-independent proof of the Kochen-Specker theorem with 13 directions determined by 26 points on the surface of a magic cube.     

Underlayer dependence of electric field effect on magnetic anisotropy and its volatility in CoFeB/MgO structures

We report the dependence of voltage-controlled magnetic anisotropy (VCMA) effect and its volatility on an underlayer (UL) in CoFeB/MgO structures. For a sample with Ta or Pt UL, the VCMA effect occurs when the applied gate voltage (V_g) exceeds a critical value, and it persists even after removing V_g. This is in contrast to the volatile VCMA effect and its linear dependence on V_g in a sample with W UL. Furthermore, we demonstrate that the volatility of the VCMA effect can be modified by introducing a Ta/W bilayer, enabling arbitrary control of the magnetic properties via VCMA effect.     

Cobalt Based Nanoparticles Embedded Reduced Graphene Oxide Aerogel for Hydrogen Evolution Electrocatalyst

Efficient water electrolysis catalyst is highly demanded for the production of hydrogen as a sustainable energy fuel. It is reported that cobalt derived nanoparticle (CoS₂, CoP, CoS|P) decorated reduced graphene oxide (rGO) composite aerogel catalysts for highly active and reliable hydrogen evolution reaction electrocatalysts. 7 nm level cobalt derived nanoparticles are synthesized over graphene aerogel surfaces with excellent surface coverage and maximal expose of active sites. CoS|P/rGO hybrid aerogel composites show an excellent catalytic activity with overpotential of ≈169 mV at a current density of ≈10 mA cm^?2. Accordingly, efficient charge transfer is attained with Tafel slope of ≈52 mV dec^?1 and a charge transfer resistance (R_ct) of ≈12 Ω. This work suggests a viable route toward ultrasmall, uniform nanoparticles decorated graphene surfaces with well‐controlled chemical compositions, which can be generally useful for various applications commonly requiring large exposure of active surface area as well as robust interparticle charger transfer.     

Origin of cathodic degradation and new phase formation at the La0.9Sr0.1MnO3/YSZ interface

New phase formation at the La_0.9Sr_0.1MnO₃/YSZ interface and its effects on the cathodic performances were studied at 900 °C in air. The resistance caused by the interfacial product layer kept increasing with time to reach up to 40% of the total resistance after 500 h. The interfacial product was identified as La₂Zr₂O₇ by XRD measurement. The electrical conductivity of La₂Zr₂O₇ (2.4 × 10⁻⁵ S cm⁻¹ at 1000 °C), measured by AC impedance and current interruption methods, was 4 to 7 orders of magnitude smaller than those of La_0.9Sr_0.1MnO₃ electrode or YSZ electrolyte. Either the electronic conductivity or the electrochemical O₂ reduction activity of La₂Zr₂O₇ was negligible. Combining these results, a conclusion was made that the cathodic degradation comes mainly from the growth of interfacial product layer and its contribution to the cell resistance increment is ohmic in nature.