Investigation on ion movement in the fringe-field switching mode depending on resistivity of alignment layer and dielectric anisotropic sign of liquid crystal

Adsorption and desorption of ions at interface between liquid crystal and alignment layer in liquid crystal displays play a crucial role in residual direct current voltage associated with image sticking. In this article, the dependency of such adsorption and desorption of ions on resistivity of alignment layer and sign of liquid crystal dielectric anisotropy in the fringe-field liquid crystal cell has been investigated. Our studies show that the time constant of ions during adsorption and desorption depends upon resistivity and dielectric constant of liquid crystal and alignment layer, and most strongly influenced by the resistivity of alignment layer such that the one with lower resistivity in two orders shows much faster adsorption and desorption at the interface than that of the one with higher resistivity.     

Biological Removal of Phosphate at Low Concentrations Using Recombinant Escherichia coli Expressing Phosphate-Binding Protein in Periplasmic Space

During wastewater treatment, phosphate removal is an important and challenging process; thus, diverse technologies, including those derived from biological means, have been devised for efficient phosphate removal. Although conventional biological methods are effective in decreasing wastewater phosphate levels to ~1 mg/L, long periods of microbial adaptation are required for effective phosphate removal, and the removal efficiency of these methods is relatively poor at lower phosphate concentrations. In the present work, we constructed a recombinant Escherichia coli with periplasmic-expressed phosphate-binding protein (PBP) and investigated its biological removal ability for low phosphate levels. We found that the PBP-expressing recombinant E. coli cells showed efficient (> 94 %) removal of phosphate at low concentrations (0.2–1.0 mg/L) in a treated cell mass-dependent manner. Collectively, we propose that our PBP-expressing recombinant whole-cell system could be successfully used during wastewater treatment for the biological removal of low concentrations of phosphate.     

Glucose Oxidase/Cellulose–Carbon Nanotube Composite Paper as a Biocompatible Bioelectrode for Biofuel Cells

Biofuel cells are devices for generating electrical energy directly from chemical energy of renewable biomass using biocatalysts such as enzymes. Efficient electrical communication between redox enzymes and electrodes is essential for enzymatic biofuel cells. Carbon nanotubes (CNTs) have been recognized as ideal electrode materials because of their high electrical conductivity, large surface area, and inertness. Electrodes consisting entirely of CNTs, which are known as CNT paper, have high surface areas but are typically weak in mechanical strength. In this study, cellulose (CL)–CNT composite paper was fabricated as electrodes for enzymatic biofuel cells. This composite electrode was prepared by vacuum filtration of CNTs followed by reconstitution of cellulose dissolved in ionic liquid, 1-ethyl-3-methylimidazolium acetate. Glucose oxidase (GOx), which is a redox enzyme capable of oxidizing glucose as a renewable fuel using oxygen, was immobilized on the CL–CNT composite paper. Cyclic voltammograms revealed that the GOx/CL–CNT paper electrode showed a pair of well-defined peaks, which agreed well with that of FAD/FADH_2, the redox center of GOx. This result clearly shows that the direct electron transfer (DET) between the GOx and the composite electrode was achieved. However, this DET was dependent on the type of CNTs. It was also found that the GOx immobilized on the composite electrode retained catalytic activity for the oxidation of glucose.     

Improved optical and electrical properties of sol–gel-derived boron-doped zinc oxide thin films

Sol–gel spin-coating was used to grow zinc oxide (ZnO) thin films doped with 0–2.5 at.% B on quartz substrates. The structural, optical, and electrical properties of the thin films were investigated using field-emission scanning electron microscopy, X-ray diffraction (XRD), photoluminescence (PL), ultraviolet–visible spectroscopy, and van der Pauw Hall-effect measurements. All the thin films had deposited well onto the quartz substrates and exhibited granular morphology. The average crystallite size, lattice constants, residual stress, and lengths of the bonds in the crystal lattice of the thin films were calculated from the XRD data. The PL spectra showed near-band-edge (NBE) and deep-level emissions, and B doping varied the PL properties and increased the efficiency of the NBE emission. The optical transmittance spectra for the undoped ZnO and boron-doped zinc oxide (BZO) thin films show that the optical transmittance of the BZO thin films was significantly higher than that of the undoped ZnO thin films in the visible region of the spectra and that the absorption edge of the BZO thin films was blue-shifted. In addition, doping the ZnO thin films with B significantly varied the absorption coefficient, optical band gap, Urbach energy, refractive index, extinction coefficient, single-oscillator energy, dispersion energy, average oscillator strength, average oscillator wavelength, dielectric constant, and optical conductivity of the BZO thin films. The Hall-effect data suggested that B doping also improved the electrical properties such as the carrier concentration, mobility, and resistivity of the thin films.     

Rapid and sensitive detection of lower respiratory tract infections by stuffer‐free multiplex ligation‐dependent probe amplification

Lower respiratory tract infection is one of the most common infectious diseases. However, conventional methods for detecting infectious pathogens are time‐consuming, and generally have a limited impact on early therapeutic decisions. We previously reported a rapid and sensitive method for detecting such pathogens using stuffer‐free multiplex ligation‐dependent probe amplification coupled with high‐resolution CE‐SSCP. In this study, we report an application of this method to the detection of respiratory pathogens. As originally configured, this method was capable of simultaneously detecting seven bacterial species responsible for lower respiratory tract infections, but its detection limit and assay time were insufficient to provide useful information for early therapeutic decisions. To improve sensitivity and shorten assay time, we added a target‐specific preamplification step, improving the detection limit from 50 pg of genomic DNA to 500 fg. We further decreased time requirements by optimizing the hybridization step, enabling the entire assay to be completed within 7 h while maintaining the same detection limit. Taken together, these improvements enable the rapid detection of infectious doses of pathogens (i.e. a few dozen cells), establishing the strong potential of the refined method, particularly for aiding early treatment decisions.     

A one-pot tandem synthesis of various 1,2-disubstituted benzimidazoles

A facile method to synthesize various 1,2-disubstituted benzimidazoles is developed. It is suggested that formation of a Meisenheimer adduct between the substrate, amine, and solvent aids the N-arylation process. The generality of the protocol is demonstrated by the efficient reactions involving numerous substituents ranging from electron-withdrawing groups to electron-donating groups.     

Ultra‐trace level determination of diquat and paraquat residues in surface and drinking water using ion‐pair liquid chromatography with tandem mass spectrometry: A comparison of direct injection and solid‐phase extraction methods

Direct injection and solid‐phase extraction methods for the determination of diquat and paraquat in surface and drinking water were developed using liquid chromatography with tandem mass spectrometry. The signal intensities of analytes based on six ion‐pairing reagents were compared with each other, and 12.5 mM nonafluoropentanoic acid was selected as the best suited amongst them. A clean‐up method was developed using Oasis hydrophilic–lipophilic balance; this was compared to the direct injection method, with respect to limits of detection, interference, precision, and accuracy. Limits of quantification of diquat and paraquat were 0.03 and 0.01 μg/L using the direct injection method, and 0.002 and 0.001 μg/L using the hydrophilic–lipophilic balance method. When the hydrophilic–lipophilic balance method was used to analyze target compounds in 114 surface water and 30 drinking water samples, paraquat and diquat were detected within a concentration range of 0.001–0.12 and 0.002–0.038 μg/L in surface water, respectively. When the direct injection method was used to analyze target compounds in the same samples, the detected concentrations of paraquat and diquat were within 25% in samples being >0.015 μg/L using the hydrophilic–lipophilic balance method. The liquid chromatography with tandem mass spectrometry method using direct injection can thus be used for routine monitoring of paraquat and diquat in surface and drinking water.     

Nucleophile‐Dependent Regio‐ and Stereoselective Ring Opening of 1‐Azoniabicyclo[3.1.0]hexane Tosylate

1‐[(1R)‐(1‐Phenylethyl)]‐1‐azoniabicyclo[3.1.0]hexane tosylate was generated as a stable bicyclic aziridinium salt from the corresponding 2‐(3‐hydroxypropyl)aziridine upon reaction with p‐toluenesulfonyl anhydride. This bicyclic aziridinium ion was then treated with various nucleophiles including halides, azide, acetate, and cyanide in CH₃CN to afford either piperidines or pyrrolidines through regio‐ and stereoselective ring opening, mediated by the characteristics of the applied nucleophile. On the basis of DFT calculations, ring‐opening reactions under thermodynamic control yield piperidines, whereas reactions under kinetic control can yield both piperidines and pyrrolidines depending on the activation energies for both pathways.     

Prediction of African Swine Fever Virus Inhibitors by Molecular Docking-Driven Machine Learning Models

African swine fever virus (ASFV) causes a highly contagious and severe hemorrhagic viral disease with high mortality in domestic pigs of all ages. Although the virus is harmless to humans, the ongoing ASFV epidemic could have severe economic consequences for global food security. Recent studies have found a few antiviral agents that can inhibit ASFV infections. However, currently, there are no vaccines or antiviral drugs. Hence, there is an urgent need to identify new drugs to treat ASFV. Based on the structural information data on the targets of ASFV, we used molecular docking and machine learning models to identify novel antiviral agents. We confirmed that compounds with high affinity present in the region of interest belonged to subsets in the chemical space using principal component analysis and k-means clustering in molecular docking studies of FDA-approved drugs. These methods predicted pentagastrin as a potential antiviral drug against ASFVs. Finally, it was also observed that the compound had an inhibitory effect on AsfvPolX activity. Results from the present study suggest that molecular docking and machine learning models can play an important role in identifying potential antiviral drugs against ASFVs.     

Changes in the physical properties of low bandgap polymer after interaction with ionic liquids

Over the past few years, polymers shown comprehensive utilization in optical devices, solar cells, sensors, and other such devices. However, the efficiency of these devices remains a problem. We have synthesized new thiophene based, lowband gap polymer, poly(2-heptadecyl-4-vinylthieno[3,4-d] [1,3] selenazole) (PHVTS) and investigated the interactions between the PHVTS and ionic liquids (ILs), in this study. We have used imidazolium- and ammonium-family ILs, and studied the interactions using various spectroscopic techniques such UV–visible, FTIR, and confocal Raman spectroscopies. Additionally, we studied surface morphology of the polymer-IL film. Spectroscopic studies show that both families of ILs can interact with the newly synthesized polymer poly(2-heptadecyl-4-vinylthieno[3,4-d] [1,3] selenazole). However, the imidazolium-family Ionic Liquid-polymer (IL-polymer) mixture films show higher conductivities than ammonium-family IL–polymer mixture films.