Preparation of 2,2-difluoro-1-trialkylsilylethenylstannanes and their cross-coupling reactions

Reaction of 2 with bis(tributyltin) in the presence of 3 mol % Pd₂(dba)₃, 6 mol % XPhos, and 30 equiv of LiBr in wet and air bubbled THF at reflux for 8 h afforded the desired products 3 in 73–74% yields. The cross-coupling reaction of 3a with aryl iodides in the presence of 10 mol % Pd(PPh₃)₄ and 10 mol % CuI afforded the coupled products 4a–p in 47–90% yields. The coupling reaction of 3b with various alkynyl bromides having aryl-, alkyl, or trialkylsilyl group also afforded the corresponding 1,3-enynes 5a–g in 61–77% yields.     

Ultra‐trace level determination of diquat and paraquat residues in surface and drinking water using ion‐pair liquid chromatography with tandem mass spectrometry: A comparison of direct injection and solid‐phase extraction methods

Direct injection and solid‐phase extraction methods for the determination of diquat and paraquat in surface and drinking water were developed using liquid chromatography with tandem mass spectrometry. The signal intensities of analytes based on six ion‐pairing reagents were compared with each other, and 12.5 mM nonafluoropentanoic acid was selected as the best suited amongst them. A clean‐up method was developed using Oasis hydrophilic–lipophilic balance; this was compared to the direct injection method, with respect to limits of detection, interference, precision, and accuracy. Limits of quantification of diquat and paraquat were 0.03 and 0.01 μg/L using the direct injection method, and 0.002 and 0.001 μg/L using the hydrophilic–lipophilic balance method. When the hydrophilic–lipophilic balance method was used to analyze target compounds in 114 surface water and 30 drinking water samples, paraquat and diquat were detected within a concentration range of 0.001–0.12 and 0.002–0.038 μg/L in surface water, respectively. When the direct injection method was used to analyze target compounds in the same samples, the detected concentrations of paraquat and diquat were within 25% in samples being >0.015 μg/L using the hydrophilic–lipophilic balance method. The liquid chromatography with tandem mass spectrometry method using direct injection can thus be used for routine monitoring of paraquat and diquat in surface and drinking water.     

Nucleophile‐Dependent Regio‐ and Stereoselective Ring Opening of 1‐Azoniabicyclo[3.1.0]hexane Tosylate

1‐[(1R)‐(1‐Phenylethyl)]‐1‐azoniabicyclo[3.1.0]hexane tosylate was generated as a stable bicyclic aziridinium salt from the corresponding 2‐(3‐hydroxypropyl)aziridine upon reaction with p‐toluenesulfonyl anhydride. This bicyclic aziridinium ion was then treated with various nucleophiles including halides, azide, acetate, and cyanide in CH₃CN to afford either piperidines or pyrrolidines through regio‐ and stereoselective ring opening, mediated by the characteristics of the applied nucleophile. On the basis of DFT calculations, ring‐opening reactions under thermodynamic control yield piperidines, whereas reactions under kinetic control can yield both piperidines and pyrrolidines depending on the activation energies for both pathways.     

Dual Sulfide–Disulfide Crosslinked Networks with Rapid and Room Temperature Self‐Healability

Polymer‐based crosslinked networks with intrinsic self‐repairing ability have emerged due to their built‐in ability to repair physical damages. Here, novel dual sulfide–disulfide crosslinked networks (s‐ssPxNs) are reported exhibiting rapid and room temperature self‐healability within seconds to minutes, with no extra healing agents and no change under any environmental conditions. The method to synthesize these self‐healable networks utilizes a combination of well‐known crosslinking chemistry: photoinduced thiol‐ene click‐type radical addition, generating lightly sulfide‐crosslinked polysulfide‐based networks with excess thiols, and their oxidation, creating dynamic disulfide crosslinkages to yield the dual s‐ssPxNs. The resulting s‐ssPxN networks show rapid self‐healing within 30 s to 30 min at room temperature, as well as self‐healing elasticity with reversible viscoelastic properties. These results, combined with tunable self‐healing kinetics, demonstrate the versatility of the method as a new means to synthesize smart multifunctional polymeric materials.

     

Process Development for the Detoxification of Fermentation Inhibitors from Acid Pretreated Microalgae Hydrolysate

The aim of this study was to remove 5-hydroxymethyl furfural (5-HMF) and furfural, known as fermentation inhibitors, in acid pretreated hydrolysates (APH) obtained from Scenedesmus obliquus using activated carbon. Microwave-assisted pretreatment was used to produce APH containing glucose, xylose, and fermentation inhibitors (5-HMF, furfural). The response surface methodology was applied to optimize key detoxification variables such as temperature (16.5–58.5 °C), time (0.5–5.5 h), and solid–liquid (S-L) ratio of activated carbon (0.6–7.4 w/v%). Three variables showed significant effects on the removal of fermentation inhibitors. The optimum detoxification conditions with the maximum removal of fermentation inhibitors and the minimum loss of sugars (glucose and xylose) were as follows: temperature of 36.6 °C, extraction time of 3.86 h, and S-L ratio of 3.3 w/v%. Under these conditions, removal of 5-HMF, furfural, and sugars were 71.6, 83.1, and 2.44%, respectively, which agreed closely with the predicted values. When the APH and detoxified APH were used for ethanol fermentation by S. cerevisiae, the ethanol produced was 38.5% and 84.5% of the theoretical yields, respectively, which confirmed that detoxification using activated carbon was effective in removing fermentation inhibitors and increasing fermentation yield without significant removal of fermentable sugars.     

Changes in the physical properties of low bandgap polymer after interaction with ionic liquids

Over the past few years, polymers shown comprehensive utilization in optical devices, solar cells, sensors, and other such devices. However, the efficiency of these devices remains a problem. We have synthesized new thiophene based, lowband gap polymer, poly(2-heptadecyl-4-vinylthieno[3,4-d] [1,3] selenazole) (PHVTS) and investigated the interactions between the PHVTS and ionic liquids (ILs), in this study. We have used imidazolium- and ammonium-family ILs, and studied the interactions using various spectroscopic techniques such UV–visible, FTIR, and confocal Raman spectroscopies. Additionally, we studied surface morphology of the polymer-IL film. Spectroscopic studies show that both families of ILs can interact with the newly synthesized polymer poly(2-heptadecyl-4-vinylthieno[3,4-d] [1,3] selenazole). However, the imidazolium-family Ionic Liquid-polymer (IL-polymer) mixture films show higher conductivities than ammonium-family IL–polymer mixture films.     

Combinatorial Therapeutic Effect of Inhibitors of Aldehyde Dehydrogenase and Mitochondrial Complex I,and the Chemotherapeutic Drug,Temozolomide against Glioblastoma Tumorspheres

Resident cancer cells with stem cell-like features induce drug tolerance, facilitating survival of glioblastoma (GBM). We previously showed that strategies targeting tumor bioenergetics present a novel emerging avenue for treatment of GBM. The objective of this study was to enhance the therapeutic effects of dual inhibition of tumor bioenergetics by combination of gossypol, an aldehyde dehydrogenase inhibitor, and phenformin, a biguanide compound that depletes oxidative phosphorylation, with the chemotherapeutic drug, temozolomide (TMZ), to block proliferation, stemness, and invasiveness of GBM tumorspheres (TSs). Combination therapy with gossypol, phenformin, and TMZ induced a significant reduction in ATP levels, cell viability, stemness, and invasiveness compared to TMZ monotherapy and dual therapy with gossypol and phenformin. Analysis of differentially expressed genes revealed up-regulation of genes involved in programmed cell death, autophagy, and protein metabolism and down-regulation of those associated with cell metabolism, cycle, and adhesion. Combination of TMZ with dual inhibitors of tumor bioenergetics may, therefore, present an effective strategy against GBM by enhancing therapeutic effects through multiple mechanisms of action.     

Abnormal adsorption behavior of dimethyl disulfide on gold surfaces

Adsorption of dimethyl disulfide (DMDS) on gold colloidal nanoparticle surfaces has been examined to check its binding mechanism. Differently from previous results, DMDS molecules adsorbed on the gold surface at high concentration showed the S–S stretching band at 500 cm⁻¹ in surface-enhanced Raman scattering (SERS) spectra, which indicates the presence of intact adsorption of DMDS molecules. However, it was found that the S–S bond of disulfides was easily cleaved on the gold surface at low concentration. These behaviors were not observed for diethyl disulfide (DEDS) or diphenyl disulfide (DPDS). Our results indicate that DMDS molecules with the shortest alkyl chains on the gold surface can be inserted into self-assembled monolayers (SAMs) without the S–S bond cleavage during self-assembly due to insufficient lateral van der Waals interaction and the low adsorption activity of disulfides, whereas DEDS with longer alkyl chains or DPDS with the weak disulfide bond dissociation energy would not. These unusual DMDS adsorption behaviors were examined by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). We also compared the bonding dissociation energy of the S–S bonds of various disulfides by means of a density functional theory (DFT) calculation.     

Solvent and pH Effects on the Fluorescence of 7-(Dimethylamino)-2-Fluorenesulfonate

A novel water-soluble solvatochromic molecule, 7-(dimethylamino)-2-fluorenesulfonate (2,7-DAFS), was prepared by a three-step reaction from 2-nitrofluorene in good overall yield. The pH and solvent effects on the UV-VIS absorption and fluorescence spectra of 2,7-DAFS have been studied. Protonation of the dimethylamino group switches the absorption from intramolecular charge-transfer (ICT) to π → π* transition. The ground state pKa value of 2,7-DAFS was determined as 4.51. The fluorescence spectrum of the excited basic form, *(DAFS), shows a structureless single band with a large Stokes shift, whereas that of the acidic form, *(⁺HDAFS), exhibits a structured band with a small Stokes shift. The emission intensities of the basic and acidic forms versus pH/Ho plots show stretched sigmoidal curves and indicate that (1) the rate of deprotonation of *(⁺HDAFS) is comparable to the fluorescence decay of the species, and (2) the efficient proton-induced quenching of *(DAFS) fluorescence occurs. The pKa* was estimated as −1.7 from the fluorescence titration curve. The fluorescence maximum of *(DAFS) is blue-shifted as the polarity of solvent decreases. However, no clear dependency of the emission intensity and spectral half width, and thus fluorescence quantum yield, on the solvent polarity was revealed. It appears that the fluorescence sensitivity of 2,7-DAFS is 15 ∼ 25 times greater than the sensitivity of a widely utilized fluorescent probe, 5-(dimethylamino)-1-naphthalenesulfonate. This higher sensitivity, together with the ease of derivatization, would provide the fluorene-based fluorescent molecules significant advantages for a variety of applications.