Rapid access to ketones related to oleanolic and ursolic acids

We describe in this article a process with which to obtain different ketones related to oleanolic and ursolic acids from a natural source, Salvia canariensis L., with minimal use of chromatography columns. Amongst the isolated compounds was 12α-bromo-3-oxo-olean-13, 28-olide (3), which was fully characterised, including a characterisation of its molecular configuration by X-ray crystallographic analysis by 1 and 2-dimensional NMR techniques.     

Plants as sources of new antimicrobials and resistance-modifying agents

Covering: up to November 2011Infections caused by multidrug-resistant bacteria are an increasing problem due to the emergence and propagation of microbial drug resistance and the lack of development of new antimicrobials. Traditional methods of antibiotic discovery have failed to keep pace with the evolution of resistance. Therefore, new strategies to control bacterial infections are highly desirable. Plant secondary metabolites (phytochemicals) have already demonstrated their potential as antibacterials when used alone and as synergists or potentiators of other antibacterial agents. The use of phytochemical products and plant extracts as resistance-modifying agents (RMAs) represents an increasingly active research topic. Phytochemicals frequently act through different mechanisms than conventional antibiotics and could, therefore be of use in the treatment of resistant bacteria. The therapeutic utility of these products, however, remains to be clinically proven. The aim of this article is to review the advances in in vitro and in vivo studies on the potential chemotherapeutic value of phytochemical products and plant extracts as RMAs to restore the efficacy of antibiotics against resistant pathogenic bacteria. The mode of action of RMAs on the potentiation of antibiotics is also described.     

Morphology and size control of barium carbonate in ethanol–water mixed solvents

Barium carbonate (BaCO₃) particles have been obtained by the precipitation reaction of CO₂ bubbles to barium hydroxide [Ba(OH)₂] in the ethanol–water mixed solvents. Various morphologies, from rounded peanut, leaf-like, rod, and needle particles, were controlled by the precipitation step, where CO₂ gas was fed to Ba(OH)₂ in ethanol–water mixed solvent. The CO₂ gas as a carbonate source and Ba(OH)₂ slurry as a barium ion source are dissolved in the mixed solvents, within the solubility limit, to precipitate. The reactants dissolve progressively while they precipitate to BaCO₃. Ba(OH) ₂ slurry becomes translucent and opaque while the reaction proceeds. It becomes more opaque, upon which the dissolution of Ba(OH)₂ proceeds and BaCO₃ precipitates. The opaqueness of the products depends on the particle size of BaCO₃ in the product. The characteristics of BaCO₃ were confirmed by the X-ray diffraction (XRD), transmission electron microscope (TEM), and electrophoretic light scattering methods. The amount of water in the mixed solvents and of Ba(OH) ₂ in the reaction batch is related to the reaction rate in the nucleation and growing step, so that it was possible to control the shape of particles. Based on the understanding of the size and morphology of BaCO₃ in the solid/liquid–gas system, it was possible to obtain a well-dispersed average 40-nm BaCO₃ colloid.     

Synthesis of (4R,5S)-(−)- and (4S,5S)-(+)-L-Factors and Muricatacin from D-Glucose

Abstract

In connection with our projects on the synthesis of biologically active 5-hydroxyalkan-4-olides which have a chiral 2.3-diol unit,¹ we have carried out the synthesis of (4R,5S)-(?)- and (4R,5S)-(+)-L-factors (1).² the proposed autoregulators from Streptomyees griseus, and muricatacin (2),³ a biologically active constituent from the seeds of Annona muricata L. via 2.3-dihydroxy aldehydes derived from D-glucose. Hex-3-enofuranose4 was prepared by the elimination of thetriflate derived from D-glucose.     

Microwave-Assisted Direct Synthesis of 4H-1,2,4-Benzothiadiazine 1,1-Dioxide Derivatives

Abstract

We describe a rapid and convenient methodology for the preparation of diverse 3-aryl and 3-trifluoromethyl 4H-1,2,4-benzothiadiazine-1,1-dioxides in a one-pot microwave-promoted reaction between 2-aminobenzenesulfonamides and benzaldehydes, trifluoroacetic acid or benzoic acids.

GRAPHICAL ABSTRACT      

Amide-based nonheme cobalt(III) olefin epoxidation catalyst: partition of multiple active oxidants Co(V)=O, Co(IV)=O, and Co(III)-OO(O)CR

A mononuclear nonheme cobalt(III) complex of a tetradentate ligand containing two deprotonated amide moieties, [Co(bpc)Cl(2)][Et(4)N] (1; H(2)bpc = 4,5-dichloro-1,2-bis(2-pyridine-2-carboxamido)benzene), was prepared and then characterized by elemental analysis, IR, UV/Vis, and EPR spectroscopy, and X-ray crystallography. This nonheme Co(III) complex catalyzes olefin epoxidation upon treatment with meta-chloroperbenzoic acid. It is proposed that complex 1 shows partitioning between the heterolytic and homolytic cleavage of an O-O bond to afford Co(V)=O (3) and Co(IV)=O (4) intermediates, proposed to be responsible for the stereospecific olefin epoxidation and radical-type oxidations, respectively. Moreover, under extreme conditions, in which the concentration of an active substrate is very high, the Co-OOC(O)R (2) species is a possible reactive species for epoxidation. Furthermore, partitioning between heterolysis and homolysis of the O-O bond of the intermediate 2 might be very sensitive to the nature of the solvent, and the O-O bond of the Co-OOC(O)R species might proceed predominantly by heterolytic cleavage, even in the presence of small amounts of protic solvent, to produce a discrete Co(V) ?O intermediate as the dominant reactive species. Evidence for these multiple active oxidants was derived from product analysis, the use of peroxyphenylacetic acid as the peracid, and EPR measurements. The results suggest that a less accessible Co(V)=O moiety can form in a system in which the supporting chelate ligand comprises a mixture of neutral and anionic nitrogen donors.     

Signal enhancement of a micro-arrayed polydiacetylene (PDA) biosensor using gold nanoparticles

Polydiacetylene (PDA) liposomes possess unique properties that allow liposomes to change color and emit fluorescence in response to stimuli such as temperature, antibody-antigen interaction, pH, mechanical stress, and organic solvent. They have been studied extensively as signal transducers in biosensor applications. Here, we describe an antibody-based biosensor using PDA liposomes for detection of human immunoglobulin E (hIgE). Target hIgE chemically bound to hIgE monoclonal antibodies immobilized on PDA liposomes and the fluorescent signals were slightly increased depending on the target protein concentration. As the primary response, the hIgE could be detected to below 10 ng mL(-1). However, fluorescent signals were dramatically increased depending on the target protein concentration when gold nanoparticle-conjugated polyclonal antibody probes were added on the PDA liposomes after the primary immune reaction. A PDA liposome biosensor could detect the hIgE as low as 0.1 ng mL(-1) and the sensitivity was increased up to one hundred times higher than the primary response. As a result, we confirmed that gold nanoparticle-conjugated polyclonal antibody probes efficiently enhanced the fluorescent signal of the PDA liposome biosensor chip. This strategy can be useful to detect proteins of ultra-low concentration.     

One-step solvothermal synthesis of single-crystalline TiOF2 nanotubes with high lithium-ion battery performance

Single-crystalline TiOF(2) nanotubes were prepared by a one-step solvothermal method. The nanotubes are rectangular in shape with a length of 2-3?μm, width of 200-300?nm, and wall thickness of 40-60?nm. The formation of TiOF(2) nanotubes is directly driven by the interaction between TiF(4) and oleic acid in octadecane to form the 1D nanorods, and this is followed by a mass diffusion process to form the hollow structures. The synthesis approach can be extended to grow TiOF(2) nanoparticles and nanorods. Compared with TiO(2), which is the more commonly considered anode material in lithium-ion batteries, TiOF(2) has the advantages of a lower Li-intercalation voltage (e.g., to help increase the total voltage of the battery cell) and higher specific capacities. The TiOF(2) nanotubes showed good Li-storage properties with high specific capacities, stable cyclabilities, and good rate capabilities.     

Nanoparticles and surfaces presenting antifungal, antibacterial and antiviral properties

Here, we present new antimicrobial nanoparticles based on silica nanoparticles (SNPs) coated with a quaternary ammonium cationic surfactant, didodecyldimethylammonium bromide (DDAB). Depending on the initial concentration of DDAB, SNPs immobilize between 45 and 275 μg of DDAB per milligram of nanoparticle. For high concentrations of DDAB adsorbed to SNP, a bilayer is formed as confirmed by zeta potential measurements, thermogravimetry, and diffuse reflectance infrared Fourier transform (DRIFT) analyses. Interestingly, these nanoparticles have lower minimal inhibitory concentrations (MIC) against bacteria and fungi than soluble surfactant. The electrostatic interaction of the DDAB with the SNP is strong, since no measurable loss of antimicrobial activity was observed after suspension in aqueous solution for 60 days. We further show that the antimicrobial activity of the nanoparticle does not require the leaching of the surfactant from the surface of the NPs. The SNPs may be immobilized onto surfaces with different chemistry while maintaining their antimicrobial activity, in this case extended to a virucidal activity. The versatility, relative facility in preparation, low cost, and large antimicrobial activity of our platform makes it attractive as a coating for large surfaces.