A phloroglucinol derivative with a new carbon skeleton from Hypericum perforatum (Guttiferae)

Examination of the aerial parts of a Chinese herbal medicine yielded a novel metabolite, perforatumone 1, which is characterized by its unique carbon skeleton. Its structure was determined by detailed spectroscopic analysis.     

Strong visible PL from the nc-Si thin film by Ni silicide mediated crystallization

We studied the growth of nanocrystalline silicon (nc-Si) thin film exhibiting a strong room temperature photoluminescence (PL) at 1.81–2.003 eV. The amorphous silicon was crystallized by Ni silicide mediated crystallization (Ni SMC) and then Secco-etched to exhibit the PL. The PL peak energy and intensity increase with increasing the metal density on the a-Si because of the reduction in the grain size down to 2 nm. The photoluminescence energy and peak intensity depend strongly on the Secco etch time because the grain size is reduced by etching the grain boundaries.     

A spring-embedding approach for the facility layout problem

The facility layout problem is concerned with finding the most efficient arrangement of a given number of departments with unequal area requirements within a facility. The facility layout problem is a hard problem, and therefore, exact solution methods are only feasible for small or greatly restricted problems. In this paper, we propose a spring-embedding approach that unlike previous approaches results in a model that is convex. Numerical results demonstrating the potential of our model and the efficiency of our solution procedure are presented.     

Experimental Evaluation of Strain Shielding in Distal Femur in Revision TKA

Theoretical concerns about the use of cemented and press-fit stems in revision total knee arthroplasty (TKA) include stress shielding with adverse effects on prosthesis fixation. Radiological studies have showed distal femoral bone resorption after revision TKA. The revision with use of stems can place abnormal stresses. These stresses can promote the effect of bone stress shielding and may contribute to bone loss. Experimental quantification of strain shielding in the distal synthetic femur following TKA is the main purpose of the present study. Three different constructs of TKA were assessed. The first construct included a stemless femoral component. The other two included a press-fit and a cemented femoral stem. Cortical bone strains were measured experimentally with tri-axial strain gauges in synthetic femurs before and after in-vitro knee surgery. The difference between principal strains of implanted and intact femur was calculated for each strain gauge position. This study indicates that the use of stems in distal femur changes the distribution and magnitude of bone strains. The press-fit stem provoked relevant bone area (stem length) subjected to strain shielding and also originated the highest reduction of strains in the distal region, which can potentially induce bone resorption. The stemless implanted femur produced minor bone strain changes relatively to the intact femur. The use of distal femur stems increases initial stability in the bone, but the observed reduction of strains in this region, relative to the intact femur, provokes strain shielding that can induce bone resorption and may compromise the long term implant stability.     

Synthesis and luminescence characteristics of conjugated dendrimers with 2,4,6‐triaryl‐1,3,5‐triazine periphery

We have synthesized conjugated dendrimer with triazine peripheries, and their luminescence properties were investigated. The dendrimers consist of dendritic triazine wedges for electron transport, distyrylbenzene core as an emitting moiety, and t‐butyl peripheral groups for good processing properties. The dendrimers have LUMO values of about ?2.7 eV possibly because of the triazine moiety with high electron affinity. Photoluminescence study indicates that energy transfer occurs from the triazine wedges to the stilbene bridge, and finally to the core chromophore units due to a cascade decrease of bandgap from the peripheral wedge to core moiety. Therefore, the emission wavelength was determined by the structure of the core unit. The energy transfer efficiency of distyrylbenzene‐cored dendrimers was about 75 and 55% for Trz‐1GD‐DSB and Trz‐2GD‐DSB, respectively. A preliminary electroluminescence property also was investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 254–263, 2006     

Effect of Electrical Pulse Forms on the CO2 Reforming of Methane Using Atmospheric Dielectric Barrier Discharge

Methane conversion using an electric discharge has been studied for many years. Recently, many research groups have developed high-frequency pulsed plasma reaction for methane conversion to higher hydrocarbons and synthesis gas. CO₂ reforming of methane to synthesis gas has also attracted considerable interest as a method of utilization of the greenhouse gases, CO₂ and CH₄, which occupy most of man-made greenhouse gases. In this study, the influence of pulse form of applied voltage on methane and carbon dioxide conversions and product selectivity has been investigated using a cylindrical type DBD reactor. For this purpose, two kinds of power supply were compared, that is, AC power supply which has a high-frequency sinusoidal wave form, and AC pulse power supply which has modified AC pulse wave form. The conversions of methane and carbon dioxide were enhanced using pulsed plasma. The lower pulse width was more profitable economically.     

Preparation of ω-tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides: Useful reagents for the synthesis of 1-(ω-mercaptoalkyl)-1,2-dihydrobuckminsterfullerenes (C60)

ω-Tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides are prepared as Grignard reagents containing protected mercaptoalkyl chains, which are useful for the direct introduction of ω-mercaptoalkyl chains to electrophiles. In order to prove the usefulness of these reagents, they were reacted with buckminsterfullerene (C₆₀) to give 1-(ω-mercaptoalkyl)-1,2-dihydrobuck minsterfullerenes after the deprotection of THP group with TFA.     

ABS blends with phenoxy: morphology,thermal, mechanical and rheological properties

Blends of ABS (acrylonitrile–butadiene–styrene) with phenoxy(poly(hydroxyether bisphenol A)) were prepared using a Branender single screw extruder. Scanning and transmission electron micrographs (SEM, TEM) showed a typical two-phase morphology; particle-in-matrix (90/10) (ABS/phenoxy by weight), 70/30, 10/90), island/sea (30/70) and co-continuous (50/50) morphologies. The glass transition temperature (T_g) of SAN was almost unchanged in the blends, while the T_g of phenoxy increased by about 5 °C in the blends. The synergistic effect of tensile modulus and strength was noted in ABS-rich blends, where a drastic drop of ductility was seen, and the results were interpreted in terms of rubber particle migration form SAN to phenoxy phase, which was visualized by TEM. Melt viscosity showed yield in ABS-rich blends, and generally followed the log additivity.