Multiferroic characteristics of the strained epitaxial Bi0.9Ho0.1FeO3 thin film

We fabricated high quality epitaxial Bi_0.9Ho_0.1FeO₃ thin films which exhibited the tetragonally stained structure with a c/a ratio of about 1.04. The Bi_0.9Ho_0.1FeO₃ thin film showed a good ferroelectric property with the high remanent polarization (P_r) of about 80 μC/cm². The ferromagnetic hysteresis loop with a clear remanent magnetization was shown. The coercive field and the remanent magnetization of the Bi_0.9Ho_0.1FeO₃ film are 6200 Oe and 1.7 emu/g, respectively. The abrupt conduction due to space charge limited (SCL) was revealed in leakage current density versus electric field.     

Molecular dynamics simulation study on graphene-nanoribbon-resonators tuned by adjusting axial strain

A tunable graphene-nanoribbon (GNR)-resonator was investigated via classical molecular dynamics simulations. Resonance frequencies increased with increasing externally applied gate-force and axial-strain, and could be tuned above several hundred GHz. Tunable resonance frequencies achieved from the gate force were higher than those achieved from the axial-strain. The operating frequencies of GNR-resonators without axial-strain or with small axial-strains were most widely tuned by the gate, and almost linearly increased with increasing mean deflection. As the axial strain increased, the tunable ranges of the GNR-resonators were exponentially decreased, although the operating frequencies increased. GNR-resonators without axial-strain could be applied to wide-range-tuners, whereas GNR-resonators with high axial-strain could be applied to high-frequency-fine-tuners.     

Curing temperature- and concentration-dependent dielectric properties of cross-linked poly-4-vinylphenol (PVP)

In this paper, dielectric properties of various thick PVP films cured at temperatures between 125° C and 200 °C are investigated. The thicknesses of PVP films are adjusted by varying their concentration in PGMEA solvent from 10 wt% to 2.5 wt%. Through FT-IR, C–V, SEM, and AFM analyses, the optimum curing process temperatures (150 °C for 10 wt% and 7.5 wt% samples, and 175 °C for 5 wt% samples) where PET substrates can be thermally endured are proposed in terms of their low hysteresis voltage in the C–V curve (1–2 V in 10 wt% samples, below 1 V in 7.5 wt% samples, and 0.5 V in 5 wt% samples).     

Corrosion inhibition of ammonium molybdate for AA6061 alloy in NaCl solution and its synergistic effect with calcium gluconate

The corrosion inhibition of ammonium heltamolybdate (AH) and calcium gluconate (CG) for AA6061 alloy in 3% NaCl solution was investigated by the electrochemical measurements. It indicates that AH inhibits the corrosion of AA6061 alloy and acts as an anodic inhibitor. Maximum inhibition efficiency reaches 74.3% at the concentration of 1 × 10^?4 mol.l^?1 AH. The results of the electrochemical studies reveal AH is physically adsorbed on the AA6061 alloy surface and the adsorption follows Langmuir isotherm. The combination of AH and CG enhances the inhibition efficiency to 95.9%. The enhanced inhibition is attributed to the promotion of AH adsorption by CG. The mixture of AH and CG is a mixed‐type inhibitor and renders the corrosion potential to more positive values. Copyright © 2011 John Wiley & Sons, Ltd.     

Real‐Time Measurement of the Size Distribution of Diesel Exhaust Particles using a Portable 4‐stage Electrical Low Pressure Impactor

For this study, a 4 stage electrical low pressure impactor was designed to measure the real‐time size distribution of diesel particulate matter (DPM). For the performance evaluation, sodium chloride (NaCl) particles and dioctyl sebacate (DOS) particles were used. After evaluating the collection efficiency of each stage of the impactor, the size distributions of test particles were estimated using electrical current data and their inversion algorithm, and this was found to agree with the results obtained by a scanning mobility particle sizer (SMPS). For measurement of DPM, a common‐rail direct injection (CRDI) diesel engine, for engine speeds of 1,200 rpm and 1,500 rpm at 2.7 kgf·m, was used. Therefore, it was found that the size distribution of the DPM could be easily obtained, with the currents measured by the impactor and the data inversion algorithm, in less than 5 seconds. Furthermore, the effective density of the DPM could be obtained using the calculated results and the SMPS data.     

Liquid chromatographic resolution of racemic rasagiline and its analogues on a chiral stationary phase based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid

A liquid chromatographic chiral stationary phase based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid was applied to the resolution of 15 analytes, including racemic rasagiline, a chiral drug for the treatment of Parkinson's disease, and its analogues. The composition of mobile phase was optimized to be ethanol/acetonitrile/acetic acid/triethylamine (80:20:0.2:0.3, v/v/v/v) by evaluating the chromatographic results for the resolution of five selected analytes under various mobile phase conditions. Under the optimized mobile phase conditions, racemic rasagiline was resolved quite well with a separation factor of 1.48 and resolution of 2.71 and its 14 analogues were also resolved reasonably well with separation factors of 1.06–1.54 and resolutions of 0.54–2.11. Among 15 analytes, racemic rasagiline was resolved best except for just one analyte. The analyte structure–enantioselectivity relationship indicated that racemic rasagiline has the most appropriate structural characteristics for resolution on the chiral stationary phase.     

Organocatalytic Conjugate Addition of Azide Ion to α,β‐Unsaturated Aldehydes

An efficient and simple amine‐catatalyzed azide conjugate addition to α,β‐unsaturated aldehydes has been developed. In the presence of a catalytic amount of tertiary amine with a 1:1 mixture of NaN₃ and 37% HCl in CH₂Cl₂, α,β‐unsaturated aldehydes provided β‐azido aldehydes, which could be transformed into 1,3‐amino alcohols.