Quantitative analyses of shape-selective intercalation of isomeric mixtures of muconates into [LiAl2(OH)6]Cl.yH2O layered double hydroxide

Quantitative investigation of the shape selectivity for the competitive intercalation reaction of isomeric mixtures in the interlayer of LDH was achieved by analyzing the solid phases synthesized by the reaction of [LiAl(2)(OH)(6)]Cl.yH(2)O with various compositional mixtures of (E,E)- and (Z,Z)-muconates. The apparent partition constant K' for the anion-exchange reaction between (E,E)- and (Z,Z)-muconates was quite dependent on the mole fraction of muconates in solution. The only single phase saturated with [LiAl(2)(OH)(6)](2)[(E,E)-C(6)H(4)O(4)].zH(2)O could be obtained in the range of the initial mole fraction of (E,E)-muconate larger than 0.6 in the starting solution, while mixed phases intercalated with (E,E)- and (Z,Z)-muconates could be obtained at lower mole fractions of (E,E)-muconate. The shape selectivity for the competitive reaction of two muconates on the [LiAl(2)(OH)(6)](+) lattice could be ascribed to thermodynamic processes, and the conditions under which that pure (E,E)-muconate was efficiently separated from isomeric mixtures of two muconates were successfully evaluated.     

Sequential actions of cobalt nanoparticles and palladium(II) catalysts: three-step one-pot synthesis of fenestranes from an enyne and an alkyne diester

A three-step one-pot synthesis of fenestranes from a readily available enyne and an alkyne diester has been carried out with cobalt nanoparticles and palladium(II) as catalysts.     

Reaction kinetics and critical phenomena: rates of some first order gas evolution reactions in binary solvents with a consolute point

We have measured the rate of carbon dioxide evolution in the aniline catalyzed decomposition of acetone dicarboxylic acid in a mixture of isobutyric acid + water near its consolute point. Within a temperature interval of 1 degrees C, which included the critical solution temperature, the first-order rate constant oscillated in magnitude by about 10% as it passed through three complete cycles of slowing down followed by speeding up. Whereas we can find no ready explanation for the speeding up, we suggest that, because the mixture contained no inert components, the slowing down should belong to the Griffiths-Wheeler class of strong critical effects [Phys. Rev. A 1970, 2, 1047]. As a check on this conclusion, we have measured the rate of the SN1 decomposition of benzene diazonium tetrafluoroborate in 2-butoxyethanol + water near the lower critical solution temperature and also the rate of the acid-catalyzed decomposition of ethyl diazoacetate in isobutyric acid + water near the upper critical solution temperature. Both of these reactions evolve nitrogen. In the first reaction, 2-butoxyethanol is inert, whereas in the second, isobutyric acid is inert. In both cases, because there was one inert component, we regarded the response of the rate constant to temperature in the critical region to be representative of the Griffiths-Wheeler class of weak critical effects. Within our accuracy of measurement of about 2% in the rate constant and about 1 mK in the temperature, we could detect no effect of the critical point on the rates of either of these reactions, suggesting that a weak effect may be too small to be seen with our experimental apparatus. The successful observation of a critical effect in the rate of decomposition of acetone dicarboxylic acid proves, however, that kinetic critical phenomena are observable in heterogeneous reactions.     

Modeling drop shape on contaminated surfaces or surfaces with physical structures

Surface contaminants are commonly found on films. They get transferred to the surface from incompletely cured silicone liners on the films or owing to migration of additives to the surface from within the film. During the process of ink jet printing (a noncontact printing process), surface contamination affects the shape of the drops (causing the formation of fingers and crescents) and hence image quality. This study uses modeling methods to examine how such surface contamination affects the drops shapes. Subsequently, it models the effect of surface structures (pits) on the drop shape. This study explores how image quality can be controlled in the presence of surface contamination and surface structures.     

Synthesis and Structures of Titanosiloxane Cage Compounds

Reaction of (triphenylmethyl)silanetriol (1) with cyclopentadienyltitanium trichloride (CpTiCl₃) in the presence of triethylamine as a HCl scavenger gave both compounds of a partial open-cage type {[Ph₃CSiO(OH)]₃(Ph₃CSiO_3/2)(CpTiO_3/2)₄} (2) and cube type (Ph₃CSiO_3/2CpTiO_3/2)₄ (3). The 1:1 reaction of 1 and CpTiCl₃ in toluene solvent at reflux temperature for 3 d afforded compounds 2 (22%) and 3 (36%). When 1 is reacted with a 1.5 fold excess of CpTiCl₃ under the same conditions, compound 3 was obtained in high yield (81%) along with 2 in trace quantities. Compounds 2 and 3 were fully characterized by the analyses of ¹H, ¹³C, ²⁹Si NMR, IR, and FAB MS data. The solid-state structure of 3 was determined by a single crystal X-ray diffraction study. Compound 3 had shown to have catalytic activity for the oxidation of alkenes such as 1-octene, cyclooctene, and norbornene with t-butyl hydrogen peroxide. The effect of solvent was observed in this epoxidation reaction. The order of reactivity were decreased as follows: CHCl₃ > hexane THF.     

Electron paramagnetic resonance study of partially oriented clay platelets intercalated with copper(II) 1,4,8,11-tetraazacyclotetradecane

Electron paramagnetic resonance (EPR) spectra of powder and oriented films of montmorillonite, hectorite, and saponite intercalated with [Cu(cyclam)](2+) (cyclam = 1,4,8,11-tetraazacyclotetradecane) exhibit three components: an orientation-dependent component without hyperfine features, an orientation-dependent component with hyperfine features, and an orientation-independent component without hyperfine feature. EPR spectra of [Cu(cyclam)](2+)-saponite, which exhibit only two components and the best resolved hyperfine features, were simulated. The spectra indicate that a large portion of the saponite platelets are inclined to the glass surface, although they tend to align with their basal planes parallel to the glass surface. The orientation-dependent spectra could be simulated by introducing a Gaussian distribution with a standard deviation of 20 degrees for the inclination angle. The standard deviation may be used as a disorder parameter for the microcrystals assembled on glass plates. Spectral simulation also shows that the CuN(4) plane of [Cu(cyclam)](2+) is parallel to the clay layers. EPR spectra of some other partially oriented systems are also discussed.     

Catalytic combustion of chlorobenzene over V2O5/TiO2 catalysts prepared by the precipitation-deposition method

Catalytic combustion of chlorobenzene over supported vanadium oxides has been investigated. TiO₂ was prepared by the sol-gel method from titanium isopropoxide. The supported vanadium oxide catalysts have been prepared by precipitation-deposition and impregnation method and characterized by XRD, FT-Raman and TPR. In the VO_x/TiO₂catalysts prepared using the impregnation method, when vanadium loading reaches 3 wt.%, the activity shows a maximum. However, in the VO_x/TiO₂catalysts prepared by precipitation-deposition, when vanadium loading reaches 7 wt.%, the activity shows a maximum. This result suggests that the precipitation-deposition can yield a higher metal loading on the support and a high dispersion compared to the impregnation method. This revised version was published online in August 2006 with corrections to the Cover Date.     

State-to-state reaction dynamics of CH3I photodissociation at 304 nm

The detailed reaction dynamics of CH(3)I photodissociation at 304 nm were studied by using high-resolution long time-delayed core-sampling photofragment translation spectroscopy. The vibrational state distributions of the photofragment, i.e., CH(3), are directly resolved due to the high kinetic resolution of this experiment for the first time. CH(3) radicals produced from I((3)Q(0+)), I((1)Q(1) <--( 3)Q(0+)), and I((3)Q(1)) channels are populated in different vibrational state distributions. The I((3)Q(0+)) and I((3)Q(1)) channels show only progressions in the nu2'(a2") umbrella bending mode, and the I((1)Q(1) <-- (3)Q(0+)) channel shows both progression in the nu2' umbrella bending mode and a small amount of excitation in the nu1'(a1') C-H stretching mode. The photodissociation processes from the vibrational hot band of CH(3)I (upsilon3 = 1, upsilon3 = 2) were also detected, primarily because of the absorption probability from the vibrational excited states, i.e., hot bands are relatively enhanced. Photofragments from the hot bands of CH(3)I show a cold vibrational distribution compared to that from the vibrational ground state of CH(3)I. The I* quantum yield and the curve crossing possibility were also studied for the ground vibrational state of CH(3)I. The potential energy at the curve crossing point was calculated to be 32 790 cm(-1) by using the one-dimensional Landau-Zener model.     

Synthesis and crystal structures of novel calix[4]azacrowns

A series of novel 1,3‐altemate calix[4]arene azacrowns having mono and bis crown ethers on the lower rim of the calix[4]arene framework were synthesized. Solid‐state structures confirmed the three dimensional conformation of compounds 1–3.     

Uniqueness and clustering properties of Gibbs states for classical and quantum unbounded spin systems

We consider quantum unbounded spin systems (lattice boson systems) in -dimensional lattice space Z. Under appropriate conditions on the interactions we prove that in a region of high temperatures the Gibbs state is unique, is translationally invariant, and has clustering properties. The main methods we use are the Wiener integral representation, the cluster expansions for zero boundary conditions and for general Gibbs state, and explicitly -dependent probability estimates. For one-dimensional systems we show the uniqueness of Gibbs states for any value of temperature by using the method of perturbed states. We also consider classical unbounded spin systems. We derive necessary estimates so that all of the results for the quantum systems hold for the classical systems by straightforward applications of the methods used in the quantum case.