基于7-（9H-carbazol-9-yl）-N,N-diphenyl-9, 9’-spirobi[fluoren]-2-amine主体材料的高效红色电致磷光器件

研究了基于新型骨架7-（9H-carbazol-9-yl）-N,N-diphenyl-9,9’-spirobi[fluoren]-2-amine（CzFA）双极性主体材料的红色电致磷光器件的光电特性。研究结果表明：将红色磷光染料iridium（Ⅲ）bis[2-methyldibenzo-（f,h）quinoxaline]（acetylacetonate）（Ir（MDQ）₂（acac））掺杂到CzFA主体材料中,以其制备的电致发光器件具有优良的特性,最大电流效率为27.8 cd/A,最大功率效率为21.8 lm/W,最大功率效率几乎是先前报道的主体材料为CBP器件（13.7 lm/W）的1.6倍。这种咔唑-螺二芴-二胺基团所组成的双极性主体材料对于提升磷光器件的性能起到了重要的作用。     

First measurement of inclusive B→Xsη decays

We report a first measurement of inclusive B→Xsη decays, where Xs is a charmless state with unit strangeness. The measurement is based on a pseudoinclusive reconstruction technique and uses a sample of 657×10(6)BB pairs accumulated with the Belle detector at the KEKB e+e- collider. For MXs < 2.6 GeV/c2, we measure a branching fraction of [26.1±3.0(stat)-2.1+1.9(syst)-7.1+4.0(model)]×10(-5) and a direct CP asymmetry of ACP=-0.13±0.04-0.03+0.02. Over half of the signal occurs in the range MXs > 1.8 GeV/c2.     

Preparation of poly(?-caprolactone)-based polyurethane nanofibers containing silver nanoparticles

In this study, poly(?-caprolactone)-based polyurethane (PCL-PU) nanofibers containing Ag nanoparticles for use in antimicrobial nanofilter applications were prepared by electrospinning 8 wt% PCL-PU solutions containing different amounts of AgNO₃ in a mixed solvent consisting of DMF/THF (7/3 w/w). The average diameter of the pure PCL-PU nanofibers was 560 nm and decreased with increasing concentration of AgNO₃. The PCL-PU nanofiber mats electrospun with AgNO₃ exhibited higher tensile strength, tensile modulus, and lower elongation than the pure PCL-PU nanofiber mats. Small Ag nanoparticles were produced by the reduction of Ag⁺ ions in the PCL-PU solutions. The average size and number of the Ag nanoparticles in the PCL-PU nanofibers were considerably increased after being annealed at 100 °C for 24 h. They were all sphere-shaped and evenly distributed in the PCL-PU nanofibers, indicating that the PCL-PU chains stabilized the Ag nanoparticles well.     

摩擦点火Ti-V-Cr阻燃钛合金燃烧产物的组织特征

采用摩擦氧浓度实验方法, 结合原位观察、扫描电镜、能谱仪和X-射线衍射分析, 系统研究Ti-V-Cr 阻燃钛合金燃烧产物的微观组织形貌、燃烧反应过程的合金元素分布规律及微观机理. 结果表明: Ti-V-Cr 阻燃钛合金燃烧过程发出闪亮耀眼的白光, 具有典型金属燃烧的火焰特征. 燃烧产物主要有TiO₂, V₂O₅和Cr₂O₃三种氧化物, 该混合氧化物以分散颗粒和致密连续体存在. 分散颗粒为规则的球形; 致密连续燃烧产物的微观组织具有分区特征, 从合金基体至燃烧表面依次为过渡区、热影响区、熔凝区和燃烧区. 其中, 过渡区存在一些微小的颗粒状凸起, 且有一定方向性; 热影响区中形成大量V基固溶体相和少量的Ti基固溶体相, V基固溶体相上存在Ti的含量远高于基体的针状析出物; 熔凝区中, 大量的Ti基固溶体中存在少量的V基固溶体; 燃烧区主要为Ti, V和Cr的氧化物混合物. 热影响区的V基固溶体相降低了Ti元素向熔凝区的迁移速率, 减慢了燃烧区Ti与O的优先反应; 燃烧区形成的TiO₂, V₂O₅和Cr₂O₃混合氧化物和熔凝区O在Ti中大量固溶共同终止了O向合金基体的继续扩散, 从而使Ti-V-Cr阻燃钛合金表现出优异的阻燃功能性.     

C_2H_2分解爆轰的实验研究

在长30m,公称直径(Dg)分别为50、65、80和100mm的管道内,进行了C_2H_2分解爆轰实验。用O_2—C_2H_2爆轰波引爆C_2H_2,测量了管道内的爆轰压力,及在管道端面上的反射压力。与以前认为在管径500mm管道内不会出现自持的C_2H_2分解爆轰的意见相反,在这样的管道内也发生了C_2H_2分解炸轰。在管端测到了1700kg/cm~2的异常高压,并对数次异常高压的破坏威力作了记录。     

一类齐次对称多项式上的切比雪夫不等式

本文借助于控制不等式及数学归纳法，将著名的切比雪夫不等式推广到m次一般齐次对称多项式上(如文中定理及引理7)，并将此结果用于对称平均等．旨在展示证明解析不等式的一些有效的方法和技巧，同时为数学研究特别是高维几何研究提供一些新的有趣而有用的解析不等式．     

1.3 GHz超导腔磁通排出效应研究

设计并搭建了一套高精度的磁场测量和补偿系统,并结合中国科学院高能物理研究所（IHEP）的2K超导腔垂直测试平台对1.3 GHz 单加速间隙超导腔的磁通排出效应开展了实验研究：利用研制的磁场测量和补偿系统能够精密地测量超导腔赤道位置磁场,并能够将磁场补偿至小于5.0×10⁻⁸ T;并对超导腔不同表面温度梯度下的磁通排出效应进行了测量分析;对钉扎了磁场的超导腔进行了射频性能测试,研究了超导腔电阻对磁通钉扎的敏感度,以及在不同电场梯度下超导腔的表面电阻变化情况。结果表明,研制的高精度磁场测量和补偿系统能够满足超导腔磁通排出研究的需求;高的超导腔表面温度梯度有利于磁通的排出;磁通钉扎电阻的敏感度随着加速电场梯度的增加而增大,导致超导腔的性能下降。此实验研究也为后续超导腔的研制奠定了一定基础。     

In-situ SiN combined with etch-stop barrier structure for high-frequency AlGaN/GaN HEMT

The etch-stop structure including the in-situ SiN and AlGaN/GaN barrier is proposed for high frequency applications.The etch-stop process is realized by placing an in-situ SiN layer on the top of the thin AlGaN barrier.F-based etching can be self-terminated after removing SiN,leaving the AlGaN barrier in the gate region.With this in-situ SiN and thin barrier etch-stop structure,the short channel effect can be suppressed,meanwhile achieving highly precisely controlled and low damage etching process.The device shows a maximum drain current of 1022 mA/mm,a peak transconductance of 459 mS/mm,and a maximum oscillation frequency(fmax)of 248 GHz.     

Annealing-free Poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester-based organic solar cells

We report on the fabrication of efficient annealing-free organic solar cells using co-solvent solution considered as a promising method for low-cost and time-saving manufacturing. Higher device efficiency could be obtained compared to the pure solvent casted device, resulting from the improved crystallinity, optical absorption and transport properties. The power conversion efficiency of 2.8% was obtained, demonstrating the feasibility of achieving low-cost and high-efficiency organic solar cells without any additional treatment and processing additives.     

An intermediate distribution between Gaussian and Cauchy distributions

In this paper, we construct an intermediate distribution linking the Gaussian and the Cauchy distribution. We provide the probability density function and the corresponding characteristic function of the intermediate distribution. Because many kinds of distributions have no moment, we introduce weighted moments. Specifically, we consider weighted moments under two types of weighted functions: the cut-off function and the exponential function. Through these two types of weighted functions, we can obtain weighted moments for almost all distributions. We consider an application of the probability density function of the intermediate distribution on the spectral line broadening in laser theory. Moreover, we utilize the intermediate distribution to the problem of the stock market return in quantitative finance.