Combinatorial Therapeutic Effect of Inhibitors of Aldehyde Dehydrogenase and Mitochondrial Complex I,and the Chemotherapeutic Drug,Temozolomide against Glioblastoma Tumorspheres

Resident cancer cells with stem cell-like features induce drug tolerance, facilitating survival of glioblastoma (GBM). We previously showed that strategies targeting tumor bioenergetics present a novel emerging avenue for treatment of GBM. The objective of this study was to enhance the therapeutic effects of dual inhibition of tumor bioenergetics by combination of gossypol, an aldehyde dehydrogenase inhibitor, and phenformin, a biguanide compound that depletes oxidative phosphorylation, with the chemotherapeutic drug, temozolomide (TMZ), to block proliferation, stemness, and invasiveness of GBM tumorspheres (TSs). Combination therapy with gossypol, phenformin, and TMZ induced a significant reduction in ATP levels, cell viability, stemness, and invasiveness compared to TMZ monotherapy and dual therapy with gossypol and phenformin. Analysis of differentially expressed genes revealed up-regulation of genes involved in programmed cell death, autophagy, and protein metabolism and down-regulation of those associated with cell metabolism, cycle, and adhesion. Combination of TMZ with dual inhibitors of tumor bioenergetics may, therefore, present an effective strategy against GBM by enhancing therapeutic effects through multiple mechanisms of action.     

Electro-optic applications of soluble polypyrrole

The optical transmittance of the film spin-cast from the polypyrrole(PPy) solution in chloroform depended on the thickness of the film. The film with 80% transmittance showed a surface resistivity of 23kΩ/□. A TN-LCD cell with rubbed PPy films as the LC alignment layers responded properly to an applied potential of 3.0V. Reflective mode cholesteric LCD cells made with black PPy film electrodes responded to AC fields to switch between the planar and focal conic states. PPy with imine structures introduced by deprotonation of doped PPy with NaOH solution was used as a diode material to exhibit a photo-current on exposing to light.     

Molecule‐specific determination of atomic polarizabilities with the polarizable atomic multipole model

Recently, many polarizable force fields have been devised to describe induction effects between molecules. In popular polarizable models based on induced dipole moments, atomic polarizabilities are the essential parameters and should be derived carefully. Here, we present a parameterization scheme for atomic polarizabilities using a minimization target function containing both molecular and atomic information. The main idea is to adopt reference data only from quantum chemical calculations, to perform atomic polarizability parameterizations even when relevant experimental data are scarce as in the case of electronically excited molecules. Specifically, our scheme assigns the atomic polarizabilities of any given molecule in such a way that its molecular polarizability tensor is well reproduced. We show that our scheme successfully works for various molecules in mimicking dipole responses not only in ground states but also in valence excited states. The electrostatic potential around a molecule with an externally perturbing nearby charge also exhibits a near‐quantitative agreement with the reference data from quantum chemical calculations. The limitation of the model with isotropic atoms is also discussed to examine the scope of its applicability. © 2012 Wiley Periodicals, Inc.     

Characteristic profiles of the inclusion complex of omeprazole/peracylated-β-cyclodextrin formed in supercritical carbon dioxide

Inclusion properties of the drug omeprazole (OMP) with peracetylated-beta-cyclodextrin (PAc-β-CD) prepared by green method, following supercritical carbon-dioxide (scCO₂), were characterized through thermal (TGA and DSC), crystalline (XRD), NMR spectroscopic and dissolution studies. Comparison amongst PAc-β-CD, OMP, physical binary mixture (equimolar ratio of OMP: PAc-β-CD) and the solid inclusion complex (OMP/PAc-β-CD) revealed scCO₂ as a successful technique for inclusion complex formation as well, identified characteristics performances of PAc-β-CD/OMP interactions. For instance, absence of characteristic DSC or XRD peaks of either chemical in the complex was quite noticeable with the shift of proton peaks in ¹H NMR spectra. The formed inclusion complex also showed an important dissolution performance of OMP for controlled release applications partly due to the hydrophobic nature of PAc-β-CD.     

Synthesis of triphenylamine-based thiophene-(N-aryl)pyrrole-thiophene dyes for dye-sensitized solar cell applications

Two new triphenylamine-based metal-free organic dyes (TPTDYE-1 and TPTDYE-2) containing 1-(2,6-diisopropylphenyl)-2,5-di(2-thienyl)pyrrole as a new π-conjugated chromophore were synthesized for dye-sensitized solar cell (DSSC) applications. TPTDYE-1 containing three donor groups around the acceptor group was found to show relatively narrow absorption band from 300 nm to 470 nm while TPTDYE-2 having extended π–π delocalization between the donor and acceptor group showed broad absorption band from 300 nm to 550 nm. The electrochemical studies indicate that the HOMO–LUMO energy gap of TPTDYE-1 is considerably wider than that of TPTDYE-2. The dye-sensitized solar cell performance of each dye was investigated, and the TPTDYE-2-sensitized cell was found to show a maximum monochromatic incident photon-to-current conversion efficiency (IPCE) of 75%, a short-circuit photocurrent density (J_sc) of 13.50 mA/cm², an open-circuit voltage (V_oc) of 0.72 V, and a fill factor (FF) of 0.69, corresponding to an overall conversion efficiency of 6.71% under simulated AM 1.5 irradiation (100 mW/cm²). Under the same condition the TPTDYE-1-sensitized cell showed the same IPCE value of 75% with a promising conversion efficiency of 6.00%, a J_sc of 11.11 mA/cm², a V_oc of 0.76 V, and a FF of 0.71.     

CDK5-dependent inhibitory phosphorylation of Drp1 during neuronal maturation

Mitochondrial functions are essential for the survival and function of neurons. Recently, it has been demonstrated that mitochondrial functions are highly associated with mitochondrial morphology, which is dynamically changed by the balance between fusion and fission. Mitochondrial morphology is primarily controlled by the activation of dynamin-related proteins including dynamin-related protein 1 (Drp1), which promotes mitochondrial fission. Drp1 activity is regulated by several post-translational modifications, thereby modifying mitochondrial morphology. Here, we found that phosphorylation of Drp1 at serine 616 (S616) is mediated by cyclin-dependent kinase 5 (CDK5) in post-mitotic rat neurons. Perturbation of CDK5 activity modified the level of Drp1^S616 phosphorylation and mitochondrial morphology in neurons. In addition, phosphorylated Drp1^S616 preferentially localized as a cytosolic monomer compared with total Drp1. Furthermore, roscovitine, a chemical inhibitor of CDKs, increased oligomerization and mitochondrial translocation of Drp1, suggesting that CDK5-dependent phosphorylation of Drp1 serves to reduce Drp1''s fission-promoting activity. Taken together, we propose that CDK5 has a significant role in the regulation of mitochondrial morphology via inhibitory phosphorylation of Drp1^S616 in post-mitotic neurons.     

Effect of irradiation on the cryogenic mechanical characteristics of polyurethane foam

The present study investigated thermal and mechanical characteristics of irradiated polyurethane foams (PUFs) according to the irradiation does under various temperature conditions, including low/cryogenic temperatures. Fourier transform infrared analysis was performed to obtain information on the PUF molecular structure. In addition, Macro- and microstructural investigations were carried out to determine the relationship between thermal and mechanical characteristics and irradiation dose. The test results were quantitatively presented, and it was found that the irradiated PUF has potential for application in industrial structures.     

Synthesis of new di-anchoring organic sensitizer based on quinoxaline acceptor for dye-sensitized solar cells

New quinoxaline-based organic sensitizer bearing di-anchoring group for dye-sensitized solar cells (DSSCs) was synthesized from diethyl 4,5-diaminophthaltate, in which was prepared under mild condition by using Takehito’s method. The synthesized sensitizer was compared with mono-anchoring sensitizer through absorption spectra, emission spectra, J-V curve, and IPCE spectra, indicating the di-anchoring group leads to a noticeable improvement of J_sc value owing to more efficient intramolecular charge transfer and channel number increment.     

Mn/Cu catalyzed addition of arylboronic acid to nitriles: Direct synthesis of arylketones

A direct and efficient synthesis of arylketones via arylboronic acid addition to nitriles in presence of inexpensive Mn/Cu catalytic system is reported. The use of non-precious Mn and Cu salts has been found to be highly advantageous both in terms of accessibility as well as cost effectiveness. A series of arylboronic acids as well as nitriles were used to synthesize a variety of symmetrical and unsymmetrical arylketones. Based on the literature studies, the reaction mechanism is anticipated to go through an aryl radical intermediate which reacted with the copper activated nitrile to give the desired arylketones after the hydrolysis of the imine intermediate.     

Reversible cyanovinylcarbazole-based polymer gel via photo-cross-linking reaction

A polymeric gel was prepared from a bis(3-cyanovinylcarbazole)-based derivative and a thymine-bearing calix[4]arene derivative via photo-cross-linking between 3-cyanovinylcarbazole and thymine groups by irradiation with 365 nm UV light, a novel and facile method to obtain a soft material. Values for storage and loss moduli of the bis(3-cyanovinylcarbazole)-based derivative and the thymine-bearing calix[4]arene derivative gradually increased during photoirradiation. This gel was transformed back to the solution state by decomposition of the polymer network to the monomers via irradiation with 312 nm UV light.