Evaporation of water droplets on polymer surfaces

The evaporation of water droplets on polymer surfaces was investigated by using a digital image analysis technique. There were three distinct stages in the water evaporation process: a constant contact area mode, a constant contact angle mode, and a mixed mode that is independent of both the initial quantity of water droplets and the hydrophobic properties of the polymer surfaces. The physical factors influencing the first and second transitions in the evaporation process were found to be the attainment of the receding angle on the polymer surfaces and the Marangoni instability in the evaporating water droplets, which result from the concentration gradient of contaminants. This study also provides qualitative information about the microfluid flows inside the evaporating water droplets and the morphology of drying stains on polymer surfaces. The contaminants were found to be concentrated at the perimeter of the stains, in agreement with the observed outward microfluid flow in the mixed mode of the evaporation process.     

In situ auger electron spectroscopy study of atomic layer deposition: growth initiation and interface formation reactions during ruthenium ALD on Si-H, SiO2, and HfO2 surfaces

Growth initiation and film nucleation in atomic layer deposition (ALD) is important for controlling interface composition and achieving atomic-scale films with well-defined composition. Ruthenium ALD is studied here using ruthenocene and oxygen as reactants, and growth initiation and nucleation are characterized on several different growth surfaces, including SiO2, HfO2, and hydrogen terminated silicon, using on-line Auger electron spectroscopy and ex-situ X-ray photoelectron spectroscopy. The time needed to reach the full growth rate (typically approximately 1 A per deposition cycle) is found to increase as the surface energy of the starting surface (determined from contact angle measurements) decreased. Growth starts more readily on HfO2 than on SiO2 or Si-H surfaces, and Auger analysis indicates distinct differences in surface reactions on the various surfaces during film nucleation. Specifically, surface oxygen is consumed during ruthenocene exposure, so the nucleation rate will depend on the availability of oxygen and the energetics of surface oxygen bonding on the starting substrate surface.     

Volatile organic compounds of Angelica gigas Nakai, Korean medicinal herb

The study was performed to find out the profile of volatile flavor components from the aromatic medicinal plant, Angelica gigas Nakai. The volatile organic compounds of A. gigas Nakai were extracted by simultaneous steam distillation and extraction (SDE) method, and identified by gas chromatograph/mass spectrometric (GC/MS) analysis. A total of 116 compounds, including 40 hydrocarbons, 37 alcohols, 15 esters, 12 aldehydes, 7 ketones, and 5 miscellaneous were identified and quantified. Among them, 75 volatile organic compounds were detected which make up 90.52% of total volatile content. alpha-Pinene was detected as the prime volatile component which accounted for 30.89% of total volatile content and 2,4,6-trimethyl heptane, camphene, alpha-limonene, beta-eudesmol, vervenol, alpha-murrolene, and sphatulenol were detected as the major components of A. gigas Nakai.     

Preparation and characterization of polyion complex micelles with a novel thermosensitive poly(2-isopropyl-2-oxazoline) shell via the complexation of oppositely charged block ionomers

Novel thermosensitive polyion complex (PIC) micelles were prepared in an aqueous medium based on the complexation of a pair of oppositely charged block ionomers, poly(2-isopropyl-2-oxazoline)-b-poly(amino acid)s (PiPrOx-b-PAA), containing thermosensitive PiPrOx segments. The controlled synthesis of PiPrOx-b-PAA was achieved via the ring-opening anionic polymerization of N-carboxyanhydrides (NCA) of either eta-benzyloxycarbonyl-l-lysine (Lys(Z)-NCA) or beta-benzyl-l-aspartate (BLA-NCA) with omega-amino-functionalized PiPrOx macroinitiators and the subsequent deprotection reaction under acidic or basic conditions. Gel permeation chromatography (GPC) and 1H NMR spectroscopy revealed that the syntheses of two block ionomers, poly(2-isopropyl-2-oxazoline)-b-poly(l-lysine) [PiPrOx-P(Lys)] and poly(2-isopropyl-2-oxazoline)-b-poly(aspartic acid) [PiPrOx-P(Asp)], proceeded almost quantitatively to give samples with a narrow molecular weight distribution (Mw/Mn 相似文献   

Cyclic voltammetry modeling, geometries, and electronic properties for metallofullerene complexes with mu3-eta2:eta2:eta2-C60 bonding mode

Reduction potential (E(red)) values have been calculated and compared with available cyclic voltammetry (CV) data for 10 metallofullerene complexes with the mu(3)-eta(2):eta(2):eta(2)-C(60) (M(3)-C(6)[C(60)]) bonding mode. Consideration of bulk solvent effects is essential for the calculation of the E(red) values. Scaling factors for the electrostatic terms of the solvation energies have been introduced to fully describe the experimental cyclic voltammograms with a small mean deviation of 0.07 V. Multiple electron reductions induce movement of the metal cluster moieties on the C(60) surface, which is accompanied with the changes in some M-C[C(60)] bonds from pi-type to sigma-type mode. However, the changes in M(3)-C(60) distances, as well as the geometric changes of M(3) and C(60), are small for the reductions, which is in harmony with the high chemical and electrochemical stability of the metallofullerenes. Our population analyses reveal that the added electrons are not localized at the C(60) moieties, and electron population in the metal clusters is significant, more than 20% (av. 37%), for all the reductions. Furthermore, we demonstrated that the two close one-electron redox waves in CV diagrams are strongly correlated with significant electron delocalization, about 40-80%, to the metal-cluster moieties in these metallofullerene complexes.     

Surface-enhanced Raman spectroscopic-encoded beads for multiplex immunoassay

A new type of encoded bead, which uses surface-enhanced Raman scattering (SERS), is described for multiplex immunoassays. Silver nanoparticles were embedded in sulfonated polystyrene (PS) beads via a polyol method, and they were used as SERS-active substrates. Raman-label organic compounds such as 4-methylbenzenethiol (4-MT), 2-naphthalenethiol (2-NT), and benzenethiol (BT) were then adsorbed onto the silver nanoparticles in the sulfonated PS bead. Although only three kinds of encoding have been demonstrated here, various combinations of these Raman-label organic compounds have the potential to give a large number of tags. The Raman-label-incorporated particles were then coated with a silica shell using tetraethoxyorthosilicate (TEOS) for chemical stability and biocompatibility. The resulting beads showed unique and intense Raman signals for the labeled organic compounds. We demonstrated that SERS-encoded beads could be used for multiplex detection with a model using streptavidin and p53. In our system, the binding event of target molecules and the type of ligand can be simultaneously recognized by Raman spectroscopy using a single laser-line excitation (514.5 nm).     

On-chip erythrocyte deformability test under optical pressure

This paper presents a novel method for an on-chip erythrocyte deformability test under optical pressure, especially to enhance the level of sensitivity with respect to the detection of cancerous diseases. To demonstrate the performance and sensitivity of the combined method, we introduce the concept of transit velocity, a modified elongation index, and shape recovery time of individual erythrocytes in a strictly confined region (2 microm deep, 4 microm wide, and 100 microm long). Finally, we investigate a synergy or convergence effect due to the combination of these parameters for in situ detection of cancerous diseases under optical pressure.     

Synthesis of nanosized TiO2/SiO2 particles using microwave processes and their photocatalytic activity on the decomposition of orange II

The nanosized titania and TiO₂/SiO₂ particles were prepared by the microwave-hydrothermal method. The effect of physical properties TTIP/TEOS ratio and calcination temperature has been investigated. The major phase of the pure TiO₂ particle is of the anatase structure, and a rutile peak was observed above 800°C. In TiO₂/SiO₂ particles, however, no significant rutile phase was observed, although the calcination temperature was 900°C. No peaks for the silica crystal phase were observed at either silica/titania ratio. The crystallite size of TiO₂/SiO₂ particles decreases as compared to pure TiO₂ at high calcination temperatures. The TiO₂/SiO₂ particles show higher activity on the photocatalytic decomposition of orange II as compared to pure TiO₂ particles.     

Photocatalytic decomposition of orange II over TiO2-loaded on SBA-15 prepared using a microwave process

SBA-15 mesoporous material was prepared by microwave-hydrothermal method and was used as support in TiO₂-loaded SBA-15 photocatalysts. The physical properties of these particles were investigated. We also examined the activity of these samples as photocatalysts for the decomposition of orange II. Titania loaded on a silica matrix decreases the surface area of the support as expected for TiO₂ incorporation. For TiO₂-loaded SBA-15 photocatalysts, the IR absorption at ∼960 cm⁻¹ commonly accepted as the characteristic vibration of the Ti-O-Si bond. The photocatalytic activity increases with an increase of the TiO₂ loading.