A Smart Photochromic Semiconductor: Breaking the Intrinsic Positive Relation Between Conductance and Temperature

Breaking the intrinsic rule of semiconductors that conductivity increases with increase of temperature and realizing a dramatic dropping of conductivity at high temperature may arouse new intriguing applications, such as circuit overload or over‐temperature protecting. This goal has now been achieved through T‐type electron‐transfer photochromism of one organic semiconductor assembled by intermolecular cation???π interactions. Conductivity of the viologen‐based model semiconductor (H₂bipy)(Hox)₂ (H₂bipy=4,4′‐bipyridin‐1,1′‐dium; ox=oxalate) increased by 2 orders of magnitude after photoinduced electron transfer (a record for photoswitchable organic semiconductors) and generation of radical cation???π interactions, and fell by approximately 81 % at 100 °C through reverse electron transfer and degeneration of the radical cation???π interactions. The model semiconductor has at least two different electron transfer pathways in the decoloration process.     

Encapsulating Perovskite Quantum Dots in Iron‐Based Metal–Organic Frameworks (MOFs) for Efficient Photocatalytic CO2 Reduction

Improving the stability of lead halide perovskite quantum dots (QDs) in a system containing water is the key for their practical application in artificial photosynthesis. Herein, we encapsulate low‐cost CH₃NH₃PbI₃ (MAPbI₃) perovskite QDs in the pores of earth‐abundant Fe‐porphyrin based metal organic framework (MOF) PCN‐221(Fe_x) by a sequential deposition route, to construct a series of composite photocatalysts of MAPbI₃@PCN‐221(Fe_x) (x=0–1). Protected by the MOF the composite photocatalysts exhibit much improved stability in reaction systems containing water. The close contact of QDs to the Fe catalytic site in the MOF, allows the photogenerated electrons in the QDs to transfer rapidly the Fe catalytic sites to enhance the photocatalytic activity for CO₂ reduction. Using water as an electron source, MAPbI₃@PCN‐221(Fe_0.2) exhibits a record‐high total yield of 1559 μmol g^?1 for photocatalytic CO₂ reduction to CO (34 %) and CH₄ (66 %), 38 times higher than that of PCN‐221(Fe_0.2) in the absence of perovskite QDs.     

Dehydrogenative Silylation of Alkenes for the Synthesis of Substituted Allylsilanes by Photoredox,Hydrogen‐Atom Transfer,and Cobalt Catalysis

A synergistic catalytic method combining photoredox catalysis, hydrogen‐atom transfer, and proton‐reduction catalysis for the dehydrogenative silylation of alkenes was developed. With this approach, a highly concise route to substituted allylsilanes has been achieved under very mild reaction conditions without using oxidants. This transformation features good to excellent yields, operational simplicity, and high atom economy. Based on control experiments, a possible reaction mechanism is proposed.     

Modulation versus Templating: Fine‐Tuning of Hierarchally Porous PCN‐250 Using Fatty Acids To Engineer Guest Adsorption

Modulation and templating are two synthetic techniques that have garnered significant attention over the last several years for the preparation of hierarchically porous metal–organic frameworks (HP‐MOFs). In this study, by using fatty acids with different lengths and concentrations as dual‐functional modulators/templates, we were able to obtain HP‐MOFs with tunable mesopores that exhibit different pore diameters and locations. We found that the length and concentration of the fatty acids can determine if micelle formation occurs, which in turn dictates the porosity of the resulting HP‐MOFs. The HP‐MOFs with different mesopores differed in their performance in gas uptake and dye adsorption, and the structure–performance relationships were ascribed to the pore diameters and locations. This approach could provide a potentially universal method to efficiently introduce hierarchal mesopores into existing microporous MOF adsorbents with tunable properties.     

Modeling of Anionic Polymerization of Isoprene in an Industrial Reactor

One of the most important reasons for modeling polymerization processes is to provide a tool for estimating the risks of runaway reactions in polymer industry. This is especially important for batch processes, such as anionic polymerization of isoprene or butadiene. This work presents a theoretical and experimental research of the anionic polymerization of isoprene using cyclohexane as solvent and n‐butyllithium as initiator. In the first part, a phenomenological kinetic expression is obtained that describes the anionic polymerization of isoprene initiated by n‐butyllithium in cyclohexane. In the second, the mass and energy balance equations are solved to model the anionic polymerization of isoprene in a quasi‐adiabatic batch reactor. Adjustment of reactor parameters is made using the data obtained from a laboratory reactor. The proposed model predicts adequately the obtained temperature, pressure, and conversion profiles from this set of experiments. Finally, a mathematical model is developed to predict the behavior for the anionic polymerization of isoprene in an industrial reactor.     

Visible‐Light‐Induced [4+2] Annulation of Thiophenes and Alkynes to Construct Benzene Rings

The [4+2] annulation represents an elegant and versatile synthetic protocol for the construction of benzene rings. Herein, a strategy for visible‐light induced [4+2] annulation of thiophenes and alkynes, to afford benzene rings, is presented. Under simple and mild reaction conditions, the ready availability and structural diversity of thiophenes and alkynes permit the facile synthesis of several substituted aromatic rings. Valuable drugs and amino acids are also well tolerated. Moreover, DFT calculations explain the high regioselectivity of the reaction.     

Direct Z‐Scheme Hetero‐phase Junction of Black/Red Phosphorus for Photocatalytic Water Splitting

Black phosphorus (BP) has recently drawn attention in photocatalysis for its optical properties. However, limited by the rapid recombination of photogenerated carriers, the use of BP for photocatalytic water splitting still remains a huge challenge. Herein, we prepare a black/red phosphorus (BP/RP) hetero‐phase junction photocatalyst by a wet‐chemistry method to promote the interfacial charge separation and thus achieve Z‐scheme photocatalytic water splitting without using sacrificial agents. The Z‐scheme mechanism was confirmed by time‐resolved transient absorption spectroscopy. This work provides a novel insight into the interface design of hetero‐phase junction with atomic precision.     

Skin‐worn Soft Microfluidic Potentiometric Detection System

A flexible skin‐mounted microfluidic potentiometric device for simultaneous electrochemical monitoring of sodium and potassium in sweat is presented. The wearable device allows efficient natural sweat pumping to the potentiometric detection chamber, containing solid‐contact ion‐selective Na⁺ and K⁺ electrodes, during exercise activity. The fabricated microchip electrolyte‐sensing device displays good analytical performance and addresses sweat mixing and carry‐over issues of early epidermal potentiometric sensors. Such soft skin‐worn microchip platform integrates potentiometric measurement, microfluidic technologies with flexible electronics for real‐time wireless data transmission to mobile devices. The new fully integrated microfluidic electrolyte‐detection device paves the way for practical fitness and health monitoring applications.     

A Diruthenium‐Based Mixed Spin Complex Ru25+(S=1/2)‐CN‐Ru25+(S=3/2)

An unusual tetra‐nuclear linear cyanido‐bridged complex [Ru₂(μ‐ap)₄‐CN‐Ru₂(μ‐ap)₄](BPh₄) ( 1 ) (ap=2‐anilinopyridinate) has been synthesized and well characterized. The crystallographic data, magnetic measurement, IR, EPR and theoretical calculation results demonstrate that complex 1 is the first example of mixed spin Ru₂⁵⁺‐based complex with uncommon electronic configurations of S=1/2 for the cyanido‐C bound Ru₂⁵⁺ and S=3/2 for the cyanido‐N bound Ru₂⁵⁺. This phenomenon can be understood by the theoretical calculation results that from the precursor Ru₂(μ‐ap)₄(CN) (S=3/2) to complex 1 the energy gap between π* and δ* orbitals of the cyanido‐C bound Ru₂⁵⁺ core increases from 0.57 to 1.61 eV due to the enhancement of asymmetrical π back‐bonding effect, but that of the cyanido‐N bound Ru₂⁵⁺ core is essential identical (0.56 eV). Besides, the analysis of UV/Vis‐NIR spectra suggests that there exists metal to metal charge transfer (MMCT) from the cyanido‐N bound Ru₂⁵⁺ (S=3/2) to the cyanido‐C bound Ru₂⁵⁺ (S=1/2), supported by the TDDFT calculations.     

Migratory Shift in Oxidative Cyclodehydrogenation Reaction of Tetraphenylethylenes Containing Electron‐Rich THDTAP Moiety

Four tetraphenylethylenes ( 2 a – d ) containing an electron‐rich 2,3,4,6‐tetrahydro‐1,6‐dithia‐3a‐azaphenalene (THDTAP) moiety have been synthesized. The 2 a – d show aggregation‐induced emission (AIE) with yellowish green photoluminescence (PL) in THF‐H₂O (v/v, 1:9) solution and in the solid state. Compounds 2 a – d undergo 1,2‐migratory shift in oxidative cyclodehydrogenation reactions to afford the unexpected products 3 a – d which display green PL in CH₂Cl₂ solution and are non‐emissive in the solid state. The PL intensities of 3 a – d are clearly enhanced in the presence of meta‐chloroperoxybenzoic acid (mCPBA) owing to the oxidation of the S‐atoms on the THDTAP moiety. In contrast, the PL of 2 a – d in THF‐H₂O (v/v, 1:9) solution is quenched by adding mCPBA, ascribable to the oxidation of the C=C bond on the ethylene moiety. It is found that the absorption of 3 a – d is distinctly red‐shifted from the UV/Vis region to the NIR region upon acidification, arising from the protonation of the N‐atom on the THDTAP moiety. Furthermore, 3 a – d display nonlinear optical response (NLO) and optical limiting (OL) behaviour which is superior to that of the well‐known OL material C₆₀.