Inhibitory effects of 1,3-selenazol-4-one derivatives on mushroom tyrosinase

This study reports depigmenting potency of 1,3-selenazol-4-one derivatives, which would be based upon the finding of direct inhibition to mushroom tyrosinase. 1,3-Selenazol-4-one derivatives exhibited inhibitory effect on dopa oxidase activity of mushroom tyrosinase. In this study, inhibitory effects of six kinds of 1,3-selenazol-4-one derivatives (A, B, C, D, E and F) on mushroom tyrosinase were investigated. Compounds at a concentration of 500 microM exhibited 33.4-62.1% of inhibition on dopa oxidase activity of mushroom tyrosinase. Their inhibitory effects were higher than that of kojic acid (31.7%), a well known tyrosinase inhibitor. 2-(4-Methylphenyl)-1,3-selenazol-4-one (A) exhibited the strongest inhibitory effect among them dose-dependently and in competitive inhibition manner.     

Ortho alkylation of aromatic ketimine with functionalized alkene by Rh(I) catalyst

[reaction: see text] The reaction of the imine of aromatic ketones with functionalized alkenes was performed under a catalytic amount of (PPh3)3RhCl, and corresponding ortho-alkylated ketones were obtained after hydrolysis. A variety of functional groups in the alkene were tolerated in this ortho alkylation. This procedure expands the scope of ortho alkylation to the direct ortho functionalization of aromatic ketones.     

X-ray spectroscopy of enzyme active site analogues and related molecules: bis(dithiolene)molybdenum(IV) and -tungsten(IV,VI) complexes with variant terminal ligands

The X-ray absorption spectra at the molybdenum and selenium K-edges and the tungsten L2,3-edges are acquired for a set of 14 Mo(IV) and W(IV,VI) bis(dithiolene) complexes related to the active sites of molybdo- and tungstoenzymes. The set includes square pyramidal [MoIVL(S2C2Me2)2]- (L = O2-, R3SiO-, RO-, RS-, RSe-) and [WIV(OR)(S2C2Me2)2]-, distorted trigonal prismatic [MoIV(CO)(SeR)(S2C2Me2)2]- and [WIV(CO)L(S2C2Me2)2]- (L = RS-, RSe-), and distorted octahedral [WVIO(OR)(S2C2Me2)2]-. The dithiolene simulates the pterin-dithiolene cofactor ligand, and L represents a protein ligand. Bond lengths are determined by EXAFS analysis using the GNXAS protocol. Normalized edge spectra, non-phase-shift-corrected Fourier transforms, and EXAFS data and fits are presented. Bond lengths determined by EXAFS and X-ray crystallography agree to < or = 0.02 A as do the M-Se distances determined by both metal and selenium EXAFS. The complexes [MoIV(QR)(S2C2Me2)2]- simulate protein ligation by the DMSO reductase family of enzymes, including DMSO reductase itself (Q = O), dissimilatory nitrate reductase (Q = S), and formate dehydrogenase (Q = Se). Edge shifts of these complexes correlate with the ligand electronegativities. Terminal ligand binding is clearly distinguished in the presence of four Mo-S(dithiolene) interactions. Similarly, five-coordinate [ML(S2C2Me2)2]- and six-coordinate [M(CO)L(S2C2Me2)2]- are distinguishable by edge and EXAFS spectra. This study expands a previous XAS investigation of bis(dithiolene)metal(IV,V,VI) complexes (Musgrave, K. B.; Donahue, J. P.; Lorber, C.; Holm, R. H.; Hedman, B.; Hodgson, K. O. J. Am. Chem. Soc. 1999, 121, 10297) by including a larger inventory of molecules with variant physiologically relevant terminal ligation. The previous and present XAS results should prove useful in characterizing and refining metric features and structures of enzyme sites.     

Synthesis and characterization of highly ordered Ni-MCM-41 mesoporous molecular sieves

Highly ordered Ni-MCM-41 samples with nearly atomically dispersed nickel ions were prepared reproducibly and characterized. Similar to the Co-MCM-41 samples, the pore diameter and porosity can be precisely controlled by changing the synthesis surfactant chain length. Nickel was incorporated by isomorphous substitution of silicon in the MCM-41 silica framework, which makes the Ni-MCM-41 a physically stable catalyst in harsh reaction conditions such as CO disproportionation to single wall carbon nanotubes or CO2 methanation. X-ray absorption spectroscopy results indicate that the overall local environment of nickel in Ni-MCM-41 was a tetrahedral or distorted tetrahedral coordination with surrounding oxygen anions. Hydrogen TPR revealed that our Ni-MCM-41 samples have high stability against reduction; however, compared to Co-MCM-41, the Ni-MCM-41 has a lower reduction temperature, and both the H2-TPR and in situ XANES TPR reveal that the reducibility of nickel is not clearly correlated with the pore radius of curvature, as in the case of Co-MCM-41. This is probably a result of nickel being thermodynamically more easily reduced than cobalt. The stability of the structural order of Ni-MCM-41 has been investigated under SWNT synthesis and CO2 methanation reaction conditions as both require catalyst exposure to reducing environments leading to formation of metallic Ni clusters. Nitrogen physisorption and XRD results show that structural order was maintained under both SWNT synthesis and CO2 methanation reaction conditions. EXAFS results demonstrate that the nickel particle size can be controlled by different prereduction temperatures but not by the pore radius of curvature as in the case of Co-MCM-41.     

Photochemical study of [3(3)](1,3,5)cyclophane and emission spectral properties of [3n]cyclophanes (n = 2-6)

Thephotochemical reaction of [3(3)](1,3,5)cyclophane 2, which is a photoprecursor for the formation of propella[3(3)]prismane 18, was studied using a sterilizing lamp (254 nm). Upon photolysis in dry and wet CH2Cl2 or MeOH in the presence of 2 mol/L aqueous HCl solution, the cyclophane 2 afforded novel cage compounds comprised of new skeletons, tetracyclo[6.3.1.0.(2,7)0(4,11)]dodeca-5,9-diene 43, hexacyclo[6.4.0.0.(2,6)0.(4,11)0.(5,10)0(9,12)]dodecane 44, and pentacyclo[6.4.0.0.(2,6)0.(4,11)0(5,10)]dodecane 45. All of these products were confirmed by the X-ray structural analyses. A possible mechanism for the formation of these photoproducts via the hexaprismane derivative 18 is proposed. The photophysical properties in the excited state of the [3n]cyclophanes ([3n]CP, n = 2-6) were investigated by measuring the emission spectra and determining the quantum yields and lifetimes of the fluorescence. All [3n]CPs show excimeric fluorescence without a monomeric one. The lifetime of the excimer fluorescence becomes gradually longer with the increasing number of the trimethylene bridges. The [3n]CPs also shows excimeric phosphorescence spectra without vibrational structures for n = 2, 4, and 5, while phosphorescence is absent for n = 3 and 6. With an increase in symmetry of the benzene skeleton in the [3(3)]- and [3(6)]CPs, the probability of the radiation (phosphorescence) process from the lowest triplet state may drastically decrease.     

Effect of short-term ethanol on the proliferative response of Swiss 3T3 cells to mitogenic growth factors

Both adaptive and deleterious responses of cells to ethanol are likely triggered by short-term interactions of the cells with ethanol. Many studies have demonstrated the direct effect of ethanol on growth factor-stimulated cell proliferation. Using Swiss 3T3 cells whose growth was inhibited by ethanol in a concentration-dependent manner, we further investigated the molecular mechanisms of acute ethanol treatment by examining its effect on EGF- and PDGF-mediated cellular signaling systems for the mitogenic function. Tyrosine autophosphorylation of the growth factor receptors was partially prevented by ethanol in intact cells. When ethanol was included before or after EGF stimulation, no effect on the receptor signaling was observed. Here we also report that ethanol inhibits activation of ERK induced by both EGF and PDGF. EGF-induced JNK activation was reduced but PDGF-induced rapid JNK activation was delayed by the addition of ethanol. The balance between its inhibitory and stimulatory effect on the signaling molecules might determine the rate of cell growth.     

Efficient light harvesting and energy transfer in organic-inorganic hybrid multichromophoric materials

Thin films of silica hybrid materials consisting of two to three covalently bound organic chromophores at different ratios were conveniently synthesized and fabricated. The photophysical properties of these materials have been studied. The fluorescence spectra reveal complete fluorescence resonance energy transfer (FRET) from donor to acceptor, and the light-harvesting ability of these hybrid materials increases with increasing the molar fraction of donor chromophore. In a three-chromophore system, the energy is transferred from 300 to 530 nm successfully. Time-resolved fluorescence experiments are employed to elucidate the average rates and efficiencies (84-97%) of energy transfer in these organic/inorganic hybrid systems. The hybrid materials have been shown to provide antenna effect to facilitate energy transfer and light harvesting.     

Interleukin-1beta stimulates matrix metalloproteinase-2 expression via a prostaglandin E2-dependent mechanism in human chondrocytes

IL-1beta is known promote cyclooxygenase-2 (COX- 2) and matrix metalloproteinase-2 (MMP-2) expression. This study focuses on the characterization of the signaling cascade associated with IL-1beta-induced matrix metalloproteinase-2 (MMP-2) regulation in human chondrocytes. The decrease in collagen levels in the conditioned media was prevented by a broad spectrum MMP inhibitor, suggesting that IL-1beta promotes the proteolytic process leading to MMP-2 activation. IL-1beta-related MMP-2 expression was found to be dependent on prostaglandin E2 (PGE2) production. In addition, the induction of COX-2 and MMP-2 was inhibited by the pretreatment of chondrocytes with a SB203580 or Ro 31-8220, indicating the involvement of protein kinase C (PKC) or p38 mitogen-activated protein kinase (MAPK). However, there is no cross-talk between PKC and p38 MAPK in the IL-1beta-induced MMP-2 activation. Taken together, these results demonstrated that IL-1beta induces MMP-2 expression through the PGE2-dependent mechanism in human chondrocytes.     

Styrene polymerization in ternary microemulsions: effects of water-soluble and oil-soluble initiators

The polymerization of styrene in ternary microemulsions stabilized by the cationic surfactant tetradecyltrimethylammonium bromide was studied as a function of concentrations of water-soluble (potassium persulfate, KPS) and oil-soluble (AIBN) initiators. At a particular molar ratio of the initiators, similar maximum rates of polymerization can be achieved from using both types of the initiators. In addition, both initiated systems produced microlatexes with similar hydrodynamic radius, number of polymer particles, molecular weight of polystyrene and number of polymer chain per latex particle. But the dependencies of these latex parameters on concentrations of KPS and AIBN may not be the same. The polymerization mechanism appears to be similar, irrespective of using KPS or AIBN. It is discussed in terms of effective radicals produced for the polymerization. While the different dependencies of some latex parameters on concentrations of the initiators are attributed to the different efficiencies of the initiators in producing effective radicals.     

Expedient synthesis of indoles from N-Boc arylhydrazines

The readily available N-Boc arylhydrazines undergo efficient Fischer cyclizations to provide the indoles in good yields, when reacted with enolizable ketones.