Magnetically separable Pd catalyst for highly selective epoxide hydrogenolysis under mild conditions

A magnetically separable palladium catalyst was synthesized simply through a sol-gel process incorporating palladium nanoparticles and superparamagnetic iron oxide nanoparticles in aluminum oxyhydroxide matrix, which is highly active and selective for epoxide hydrogenolysis at room temperature under 1 atm H2. The catalyst was recycled for 25 times without loss of the activity.     

Sweep optical frequency synthesizer with a distributed-Bragg-reflector laser injection locked by a single component of an optical frequency comb

A sweep optical frequency synthesizer is demonstrated by using a frequency-stabilized optical frequency comb and injection-locked distributed-Bragg-reflector (DBR) laser diode. The injection-locked DBR laser acts as a single-frequency filter and, simultaneously, a high-gain amplifier of the optical frequency comb. The frequency instability of the heterodyne beat signal between two independently injection-locked DBR lasers is measured to be 2.3 x 10(-16) at 1 s averaging time. The output frequency of the sweep optical frequency synthesizer can be precisely tuned over 1 GHz, and a saturated absorption spectrum of the Cs D2 line at 852 nm is recorded by the injected DBR laser.     

Selective transport of cesium ion in polymeric CTA membrane containing calixcrown ethers

A series of calixcrown ethers for which the cavity size of the crown ring is varied from crown-6 to crown-7 to crown-8 were examined for the transport abilities toward alkali metal ions. These ligands were incorporated into supported liquid membranes (SLMs) and into polymer inclusion membranes (PIMs) composed of cellulose triacetate (CTA) as a support and 2-nitrophenyl octyl ether (NPOE) and tris(2-butoxyethyl) phosphate (TBEP) as a plasticizer. In both membrane systems, calixcrown-6 showed the best selectivity toward a cesium ion over other alkali metal ions. The polymeric CTA membrane showed more rapid transport rate as well as higher durability than did the SLMs.     

Mimicry of tandem repeat peptides against cell surface carbohydrates

Our approach to multivalent peptide construction relies on tentacle peptides, also known as a multiple antigenic peptides, which contain two and four repeats of a selected peptide. In this communication, we report the results of preliminary studies aimed at (1) the selection of short peptides against the carbohydrate, sLeX, (2) the synthesis of tentacle dimers and tetramers of the selected peptides, and (3) the determination of affinities and specificities of the peptides to several related carbohydrates by using the surface plasmon resonance (SPR) and the equilibrium dialysis techniques. Binding affinity studies, as well as assays of in vitro binding of the peptides to a sLeX-specific cell line, have shown that the tetrameric peptides bind to the cell surface sugars.     

pH-Dependent Release from Monoolein Cubic Phase Containing Hydrophobically Modified Chitosan

Monoolein (MO) cubic phase incorporating hydrophobically modified chosan (Hm chitosan) was prepared to obtain a pH-dependent release. Following calorimetric study, Hm chitosan had little effect on the crystal structure of MO cubic phase under acidic condition where Hm chitosan is readily soluble. At a higher pH (e.g., pH 9.0), however, the crystal structure of MO cubic phase was disturbed, possibly due to the insolubilization of Hm chitosan at the alkali condition. Whether the dye included in the cubic phase is anionic (amaranth) or cationic (methylene blue), the release from the cubic phase was suppressed as the pH of release medium increased. The structural change of cubic phase caused by the insolubilization of Hm chitosan, or the blockage of the water channel of the cubic phase by precipitated Hm chitosan would be responsible for the suppressed released.     

Investigation on ion movement in the fringe-field switching mode depending on resistivity of alignment layer and dielectric anisotropic sign of liquid crystal

Adsorption and desorption of ions at interface between liquid crystal and alignment layer in liquid crystal displays play a crucial role in residual direct current voltage associated with image sticking. In this article, the dependency of such adsorption and desorption of ions on resistivity of alignment layer and sign of liquid crystal dielectric anisotropy in the fringe-field liquid crystal cell has been investigated. Our studies show that the time constant of ions during adsorption and desorption depends upon resistivity and dielectric constant of liquid crystal and alignment layer, and most strongly influenced by the resistivity of alignment layer such that the one with lower resistivity in two orders shows much faster adsorption and desorption at the interface than that of the one with higher resistivity.     

Luminescence characteristics of minerals separated from irradiated onions during storage under different light conditions

The aim of this study was to determine the effects of light conditions during 2 years of storage on the luminescence characteristics of contaminating minerals, isolated from irradiated onions of 2 different origins. The potential use of photostimulated luminescence (PSL) as a screening and thermoluminescence (TL) as a confirmatory identification method was investigated during post-irradiation periods. Nonirradiated onions had 1,612 photon counts (PCs), However, the irradiated onions had much higher PCs (45,672–469,696, positive). The PCs of the irradiated onions decreased with storage time. However, all the irradiated onions had PCs with positive values (>5,000) even after 2 years of storage except onions stored under natural light. The decline in PCs because of light conditions during storage was in the order of sunlight, artificial light, and a darkroom, respectively. Minerals extracted from the nonirradiated samples exhibited TL glow curves of low intensities with maximum peak after 300 ^°C. However, all irradiated samples had TL glow peaks in the temperature ranges of 185–225 ^°C. The TL intensity and TL ratio of the irradiated samples decreased during storage with a slight shift in the TL peak temperature towards higher temperatures. The TL characteristics were most promising for samples stored under natural light conditions, however all the irradiated onions could be identified even after 2 years of storage.     

Application of solid phase peptide synthesis to engineering PEO–peptide block copolymers for drug delivery

This work describes a simple, versatile solid-phase peptide-synthesis (SPPS) method for preparing micelle-forming poly(ethylene oxide)-block-peptide block copolymers for drug delivery. To demonstrate its utility, this SPPS method was used to construct two series of micelle-forming block copolymers (one of constant core-composition and variable length; the other of constant core length and variable composition). The block copolymers were then used to study in detail the effect of size and composition on micellization. The various block copolymers were prepared by a combination of SPPS for the peptide block, followed by solution–phase conjugation of the peptide block with a proprionic acid derivative of poly(ethylene oxide) (PEO) to form the PEO-b-peptide block copolymer. The composition of each block component was characterized by mass spectrometry (MALDI and ES-MS). Block copolymer compositions were characterized by ¹H NMR. All the block copolymers were found to form micelles as judged by transmission electron microscopy (TEM) and light scattering analysis. To demonstrate their potential as drug delivery systems, micelles prepared from one member of the PEO-b-peptide block copolymer series were physically loaded with the anticancer drug doxorubicin (DOX). Micelle static and dynamic stability were found to correlate strongly with micelle core length. In contrast, these same micellization properties appear to be a complex function of core composition, and no clear trends could be identified from among the set of compositionally varying, fixed length block copolymer micelles. We conclude that SPPS can be used to construct biocompatible block copolymers with well-defined core lengths and compositions, which in turn can be used to study and to tailor the behavior of block copolymer micelles.