Immobilized heterobimetallic Ru/Co nanoparticle-catalyzed Pauson-Khand-type reactions in the presence of pyridylmethyl formate

Heterobimetallic Ru/Co nanoparticles, immobilized on charcoal, were synthesized and used as catalysts in the Pauson-Khand-type reaction in the presence of pyridylmethyl formate instead of carbon monoxide; the catalysts were effective for intra- and intermolecular reactions and easily reused without loss of catalytic activity.     

Effects of co-substitution on the electrical properties of BiFeO3 thin films prepared by chemical solution deposition

Ferroelectric BiFeO₃ thin films with Nd-Cr (or Sm-Cr) co-substitution (denoted by BNdFCr and BSmFCr, respectively) were deposited on the Pt(2 0 0)/TiO₂/SiO₂/Si(1 0 0) substrates by a chemical solution deposition method. X-ray diffraction patterns revealed the formation of BNdFCr and BSmFCr thin films without any secondary phases. The co-substituted BNdFCr (or BSmFCr) thin films, which were annealed at 550 °C for 30 min in N₂ atmosphere, exhibited enhanced electrical properties compared to BFO thin films with the remanent polarization (2P_r) and coercive electric field (2E_c) of 196, 188 μC/cm² and 600, 570 kV/cm with the electric field of 800 kV/cm, respectively. The leakage current densities of BNdFCr and BSmFCr thin films measured at room temperature were approximately three orders of magnitude lower than that of BFO thin film, and the leakage current at room temperature of the thin films exhibited three distinctive conduction behaviors. Furthermore, the values of pulse polarizations [i.e., +(P*-P^{^}) or −(P*-P^{^})] of BNdFCr and BSmFCr thin films were reasonably unchanged up to 1.4 × 10¹⁰ switching cycles.     

Efficient inverse radiation analysis in a cylindrical geometry using a combined method of hybrid genetic algorithm and finite-difference Newton method

An inverse radiation problem was considered to estimate boundary conditions such as temperature distribution and emissivity in axisymmetric absorbing, emitting, and scattering medium, given the measured incident radiative heat fluxes. The finite-volume method was employed to solve a direct radiative transfer equation for a two-dimensional axisymmetric geometry. Various parameter estimators, such as conjugate-gradient method, hybrid genetic algorithm, and finite-difference Newton method, were employed to solve the inverse problems, while discussing their performances in terms of estimation accuracy and computational efficiency. Based on this, we proposed, as a best inverse analysis tool, a new combined method that adopted the hybrid genetic algorithm as an initial value selector and used the finite-difference Newton method as a parameter estimator.     

Synthesis of multiarmed poly(3‐hexyl thiophene) star polymer with microgel core by GRIM and ATRP methods

Regioregular poly(3‐hexyl thiophene) (rr‐P3HT)‐based star polymers were synthesized by a crosslinking reaction of the linear rr‐P3HT macroinitiator and ethylene glycol dimethacrylate (EGDMA) crosslinker through Ru‐based atom transfer radical polymerization (ATRP), where the rr‐P3HT macroinitiator was prepared by Grignard metathesis method (GRIM) followed by end functionalization of the ATRP initiator with chlorophenylacetate (CPA) to the rr‐P3HT. Relatively high molecular weight of the star polymers were obtained (M_p = 8,988,000 g/mol), which consisted of large numbers of the rr‐P3HT arm chains radiating from the EGDMA‐based microgel core. The yield of the star polymers were strongly affected by the added amount of the EGDMA crosslinker. The crystalline structure of the rr‐P3HT by intermolecular π‐π stacking interaction gradually decreased as the star polymer formed, which was confirmed by differential scanning calorimeter (DSC), atomic force microscopy (AFM), and electro‐optical analyses. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Interpolymer complex formation between helical poly(L-proline) and random-coil poly(methacrylic acid) through hydrogen bonding

Interpolymer complex formation between poly(L -proline) (PLP) with helical structure and poly(methacrylic acid) (PMAA) with random-coil structure through hydrogen bonding in aqueous medium has been studied by several experimental techniques, e.g., viscometry, turbidimetry, potentiometry, conductometry, scanning electron microscopy, and x-ray diffraction methods. The decreases in reduced viscosity of the solution on addition of an increasing quantity of PLP to a constant amount of PMAA reveals the formation of a complex between PLP and PMAA. The minimum in reduced viscosity at a unit-mole ratio [PLP]/[PMAA] = 1.0 suggests a 1 : 1 complex formation. A distinct change in the curves for turbidity, pH, and conductance versus [PLP]/[PMAA] supports this conclusion. A scanning electron micrograph for the 1 : 1 PLP–PMAA complexes shows that the PLP/PMAA complex has the shape of entangled long fibers. An x-ray diffraction pattern for the PLP/PMAA complexes gives no diffraction patterns which appear in pure PLP, indicating the destruction of the helical structure of PLP due to the interpolymer complexation. Mixtures of PMAA with poly(γ-hydroxy-L -proline) (PHLP) which has a similar conformation as PLP, but involves intra- or intermolecular hydrogen bonds, has also been investigated by vicometry measurements. The reduced viscosity of a solution of the mixed polymers increases with increasing [PHLP], indicating no complex formation. All the results reveal that the magnitude and the nature of the forces acting in the polymers play an important role in interpolymer complexation.     

Preparation and characterization of branched and linear sulfonated poly(ether ketone sulfone) proton exchange membranes for fuel cell applications

Branched sulfonated poly(ether ketone sulfone)s (Br‐SPEKS) were prepared with bisphenol A, bis(4‐fluorophenyl)sulfone, 3,3′‐disodiumsulfonyl‐4,4′‐difluorobenzophenone, and THPE (1,1,1‐tris‐p‐hydroxyphenylethane), respectively, at 180 °C using potassium carbonate in NMP (N‐methylpyrrolidinone). THPE, as a branching agent, was used with 0.4 mol % of bisphenol A to synthesize branched copolymers. Copolymers containing 10–50 mol % disulfonated units were cast from dimethylsulfoxide solutions to form films. Linear sulfonated poly(ether ketone sulfone)s (SPEKS) were also synthesized without THPE. The films were converted from the salt to acid forms with dilute hydrochloric acid. A series of copolymers were studied by Fourier transform infrared, ¹H‐NMR spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymers with water and methanol. The ion‐exchange capacity (IEC), a measure of proton conductivity, was evaluated. The synthesized Br‐SPEKS and SPEKS membranes exhibit conductivities (25 °C) from 1.04 × 10^?3 to 4.32 × 10^?3 S/cm, water swell from 20.18 to 62.35%, IEC from 0.24 to 0.83 mequiv/g, and methanol diffusion coefficients from 3.2 × 10^?7 to 4.7 × 10^?7 cm²/S at 25 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1792–1799, 2008     

An Oxidant- and Organic Solvent-Resistant Alkaline Metalloprotease from Streptomyces olivochromogenes

Organic solvent- and detergent-resistant proteases are important from an industrial viewpoint. However, they have been less frequently reported and only few of them are from actinomycetes. A metalloprotease from Streptomyces olivochromogenes (SOMP) was purified by ion exchange with Poros HQ and gel filtration with Sepharose CL-6B. Apparent molecular mass of the enzyme was estimated to be 51 kDa by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and gelatin zymography. The activity was optimum at pH 7.5 and 50 °C and stable between pH 7.0 and 10.0. SOMP was stable below 45 °C and Ca²⁺ increased its thermostability. Ca²⁺ enhanced while Co²⁺, Cu²⁺, Zn²⁺, Mn²⁺, and Fe²⁺ inhibited the activity. Ethylenediaminetetraacetic acid and ethylene glycol-bis (β-aminoethyl ether)-N,N,N′,N′-tetraacetic acid, but not phenylmethylsulfonyl fluoride, aprotinin, and pefabloc SC, significantly suppressed the activity, suggesting that it might be a metalloprotease. Importantly, it is highly resistant against various detergents, organic solvents, and oxidizing agents, and the activity is enhanced by H₂O₂. The enzyme could be a novel protease based on its origin and peculiar biochemical properties. It may be useful in biotechnological applications especially for organic solvent-based enzymatic synthesis.     

Synthesis and characterization of a novel polymer based on anthracene moiety for organic thin film transistor

We have designed and synthesized a new polymer, which could be used in the organic thin film transistor (OTFT). Poly[2,6‐bis(3′‐dodecythiophene‐2′‐yl)anthracene] (PDTAn), which is composed with anthracene moiety and dodecyl alkyl thiophene, was synthesized by oxidative polymerization using iron (III) chloride. The mole ratio of FeCl₃ and monomer (4.2:1), keeping low temperature during the initiation reaction, amount of solvent, and dropping order were very important for oxidative polymerization without crosslinking. The molecular weight of the polymer (M_w) was measured to be 40,000 with 2.85 of polydispersity index by GPC. The physical and optical properties of the polymer were characterized by differential scanning calorimetry (DSC), cyclic voltammetry (CV), and optical absorption and photoluminescence (PL) spectroscopy. A field‐effect mobility of 1.1 × 10^?4 cm² V^?1 S^?1, a current on/off ratio of 10⁵, and the V_th at ?15.2 V had been obtained for OTFTs using this polymer semiconductor by solution coating. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5115–5122, 2008