Synthesis and characterization of highly magnetized nanocrystalline Co(30)Fe(70) alloy by chemical reduction

Co(30)Fe(70) nanoparticles with mean particle size of about 8 nm were successfully synthesized by the chemical reduction of cobalt chloride and iron chloride with borohydride as a reducing agent in aqueous solution. The composition and size of the Co(30)Fe(70) nanoparticles were optimized by controlling the molar ratio of starting materials, reaction time, and dropping rate of aqueous reducing agent. As alloy powders prepared by chemical reduction tend to be amorphous in the as-synthesized state, the as-precipitated Co(30)Fe(70) nanoparticles were heat-treated to achieve crystallinity at the different temperatures for 1 h. The Co(30)Fe(70) nanocrystallite by chemical reduction shows excellent soft magnetic behavior, such as high permeability, negligible coercivity, and high saturation magnetization like that of Co(30)Fe(70) bulk.     

Trace analysis and occurrence of anhydroerythromycin and tylosin in influent and effluent wastewater by liquid chromatography combined with electrospray tandem mass spectrometry

Two wastewater treatment plants (WWTPs) of northern Colorado were monitored for anhydroerythromycin and tylosin. An analytical method has been developed and validated for the trace determination and confirmation of these compounds in the raw influent and final effluent water matrices. This method was used to evaluate the occurrence and fate of these compounds in WWTPs. The method uses solid-phase extraction and liquid chromatography–tandem mass spectrometry with positive electrospray ionization. Detection and quantification was performed using selected reaction monitoring, and a method detection limit of between 0.01 and 0.06 μg/L was obtained. Unequivocal confirmation analysis of analyte identity according to the criteria (based on the use of identification points) of the 2002/657/EC European Commission Decision was possible with satisfactory results. Average recoveries for the two compounds ranged from 89.2±9.7% for raw influent to 93.7±6.9% for effluent wastewaters. The within-run precision of the assay was found to be always less than 14.1% for the two analytes. The overall precision was always less than 13.7%. The relative uncertainty of the present assay was also evaluated and the combined relative uncertainty ranged from 6.4 to 15.5% over three days of the validation study. These compounds were partially removed in the WWTPs with a removal efficiency of >50%. The measured concentrations in raw influents and effluents ranged from 0.09–0.35 and 0.04–0.12 μg/L for anhydroerythromycin to 0.06–0.18 and ND–0.06 μg/L for tylosin, respectively. The results indicate that WWTP effluents are relevant point sources for residues of these compounds in the aquatic environment. These occurrence results were compared with those in WWTP wastewaters of other countries.     

Burn-in by environmental shocks for two ordered subpopulations

Burn-in is a widely used engineering method of elimination of defective items before they are shipped to customers or put into field operation. In conventional burn-in procedures, components or systems are subject to a period of simulated operation prior to actual usage. Then those which failed during this period are scrapped and discarded. In this paper, we assume that the population of items is composed of two ordered subpopulations and the elimination of weak items by using environmental shocks is considered. Optimal severity levels of these shocks that minimize the defined expected costs are investigated. Some illustrative examples are discussed.     

Titanium-mediated [2 + 2 + 2] coupling of diynes with homoallylic alcohols

[reaction: see text] In connection with the known diyne-ene [2 + 2 + 2] cycloaddition reactions mediated by titanium aryloxides, the ability of titanium alkoxides to promote coupling of a titanacyclopentadiene with an alkene has been assessed for the isomerization-free preparation of 1,3-cyclohexadienes. The successful cycloaddition by titanium alkoxides is predicated on the use of homoallylic alcohols as the olefin component. With secondary homoallylic alcohols, high 1,3-diastereoselectivity is observed, which lends itself to enantioselective preparation of functionalized 1,3-cyclohexadienes.     

Separation of racemic 2,4-dinitrophenyl amino acids on 9-O-(phenyloxycarbonyl)quinine-bonded carbon-clad zirconia in reversed-phase liquid chromatography

Zirconia is known to be one of the best materials for the chromatographic support due to its excellent chemical, thermal, and mechanical stability. In this work, we report preparation and use of 9-O-(phenyloxycarbonyl)quinine-bonded carbon-clad zirconia (QNCZ) as a chiral stationary phase (CSP) for separation of N-(2,4-dinitrophenyl) (DNP)-amino acids (AAs) enantiomers in reversed-phase liquid chromatography. Retention and enantioselectivity of the QNCZ CSP were compared with those of quinine 3-triethoxysilylpropylcarbamate-coated zirconia (QNZ) and quinine 3-triethoxysilylpropylcarbamate-bonded silica (QNS). The QNCZ CSP showed in general the better enantioselectivity for most of the amino acids studied.     

Negatively charged poly(vinylidene fluoride) microfiltration membranes by sulfonation

Negatively charged PVDF microfiltration membranes were prepared using direct sulfonation with chlorosulfonic acid. The effect of sulfonation on the surface chemical properties, morphology, pore size distribution, hydrophilicity, water uptake, pure water flux, fouling and rejection were investigated. As the sulfonation reaction time was furthered, the degree of sulfonation and ion-exchange capacity increased and the membranes became more hydrophilic due to introduction of sulfonyl groups to the membrane surface. Using X-ray photoelectron spectroscopy, the composition of sulfonyl group with respect to sulfur concentration increased with time. From the SEM and porosity measurements, both the untreated and treated membranes did not reveal a substantial change in its morphology. The pure water flux increased significantly having a decreasing intrinsic resistance trend with degree of sulfonation. Both fouling phenomena and rejection were enhanced, with fouling of charged poly(styrene sulfonic acid) molecules on the surface-modified membrane decreased and rejection values increased with increasing degree of sulfonation mainly due to the effective electrostatic repulsion between the negatively charged PSSA and the negatively charged membrane.     

Nonisothermal crystallization and melting behavior of the copolymer derived from p-dioxanone and poly(ethylene glycol)

Nonisothermal crystallization and melting behaviors of poly(p-dioxanone)(PPDO)-b-poly(ethylene glycol)(PEG) with mole ratios of 80:20 and 30:70, has been studied by differential scanning calorimeter using various cooling rates. Crystallization behavior of each crystallizable segments of the copolymer was compared with the corresponding segment of homopolymer. For a given composition, the crystallization process began at higher temperature when the slower scanning rates were used. The kinetics of the PPDO segments and the PEG segments in the copolymers under nonisothermal crystallization conditions were analyzed by Ozawa equation and also the crystallization results of the copolymer segments were compared with the corresponding homopolymers. The results showed that the Ozawa equation fails to describe the whole crystallization process of the copolymer segments along with PPDO homopolymer, but describes the crystallization behavior of the PEG homopolymer. Crystallization activation energy and absolute crystallinity values were estimated from the cooling scans (using Kissinger’s method) and fusion endotherms of the subsequent heating scans, respectively.     

Diastereoselective ireland-claisen rearrangement of allylic alcohols

The “chelation-controlled” Ireland-Claisen rearrangement of allylic glycolate esters is described in which the stereocontrol of the prochiral sp² sites is achieved by the allylic oxygen substitutent.     

Titanium-Mediated Cyclization of omega-Vinyl Imides in Alkaloid Synthesis: Isoretronecanol, Trachelanthamidine, 5-Epitashiromine, and Tashiromine

A new method for the stereocontrolled synthesis of pyrrolizidine and indolizidine alkaloids by means of titanium-mediated cyclization of omega-vinyl imides is described. The general procedure involves treatment of readily available omega-vinyl imides 9 and 10 with 2.5 equiv of cyclopentylmagnesium chloride in the presence of ClTi(O-i-Pr)(3) (1.1 equiv) and subsequent stereoselective reduction of the N-acylaminal group. The cis and trans ring junction stereoisomers can be stereoselectively prepared by catalytic hydrogenation (H(2), PtO(2), EtOAc) and NaCNBH(3) reduction (TFA, MeOH), respectively. Finally, treatment of the resulting lactams with LAH or diborane afforded the target alkaloids 1-8 in good yields.     

Synthesis and Properties of 1,3,5-Tris(phenoxymethyl)-2,4,6-triethylbenzenes as NH 4 + Ionophores

The synthesis, spectroscopic characterization, and potentiometricmeasurements of new 1,3,5-trisphenoxy-2,4,6-triethylbenzenesare described. The cation binding abilities oftrisphenoxy-2,4,6-triethylbenzenes were strongly dependenton the substituents introduced on the phenoxy units: thereceptors with electron-donating alkoxy groups (–OCH₃and –OCH₂C₆H₅) provided similar potentiometricperformance to that of nonactin in PVC-based, ion-selectivemembrane electrodes. The trisphenoxy-2,4,6-triethylbenzenereceptors with ether groups on ortho and meta positions ofphenoxy units exhibit almost identical cation recognitionproperties in the PVC membranes. It is postulated that theelectron-donating nature of the alkoxy substituents increases theelectron density in the phenoxy units, resulting in increasedcation- interactions.