Interaction of metals with an organic semiconductor: Ag and In on PTCDA

The interaction of Ag and In with a thin film of 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) was studied by near-edge X-ray absorption fine structure (NEXAFS). Upon Ag deposition on a PTCDA film of 20 nm thickness the relative intensities and lineshapes, as well as the angular dependence of the spectra remains unchanged, illustrating the formation of a chemically unreactive Ag/PTCDA interface. On the other hand, the adsorption of 0.3 nm In strongly decreases the intensity of the π^* resonances in C and O K-edge NEXAFS spectra. This is attributed to a strong charge transfer between In and PTCDA, leading to a redistribution of the charge in the molecule. However, the absence of a strong shift or new features and negligible dependence of peak intensities corresponding to π^* resonances on the In thickness indicate that the interaction between In and PTCDA is not accompanied by a covalent bond formation.     

Bipyridinophane‐containing conjugated polymers modulated with an intramolecular aromatic C?H/π interaction

Bipyridinophane–fluorene conjugated copolymers have been synthesized via Suzuki and Heck coupling reactions from 5,8‐dibromo‐2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane and suitable fluorene precursors. Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P7 ) exhibits large absorption and emission redshifts of 20 and 34 nm, respectively, with respect to its planar reference polymer Poly[2,7‐(9,9‐dihexylfluorene)‐co‐alt‐1,4‐(2,5‐dimethylbenzene)] ( P11 ), which bears the same polymer backbone as P7 . These spectral shifts originate from intramolecular aromatic C? H/π interactions, which are evidenced by ultraviolet–visible and ¹H NMR spectra as well as X‐ray single‐crystal structural analysis. However, the effect of the intramolecular aromatic C? H/π interactions on the spectral shift in poly[9,9‐dihexylfluorene‐2,7‐yleneethynylene‐co‐alt‐5,8‐(2,11‐dithia[3]paracyclo[3](4,4′)‐2,2′‐bipyridinophane)] ( P10 ) is much weaker. Most interestingly, the quenching behaviors of these two conjugated polymers are largely dependent on the polymer backbone. For example, the fluorescence of P7 is efficiently quenched by Cu²⁺, Co²⁺, Ni²⁺, Zn²⁺, Mn²⁺, and Ag⁺ ions. In contrast, only Cu²⁺, Co²⁺, and Ni²⁺ ions can partially quench the fluorescence of P10 , but much less efficiently than the fluorescence of P7 . The static Stern–Volmer quenching constants of Cu²⁺, Co²⁺, and Ni²⁺ ions toward P7 are of the order of 10⁶ M^?1, being 1300, 2500, and 37,300 times larger than those of P10 , respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4154–4164, 2006     

Synchronization of a class of chaotic dynamic systems with controller gain variations

In this paper, the nonfragile control problem for synchronization of a class of chaotic dynamical systems with controller gain variations is studied. Using the Lyapunov method and LMI (linear matrix inequality) technique, a criterion for the existence of the nonfragile controller for synchronization is derived in terms of LMI. To show the effectiveness of the proposed method, the control problem is applied to Genesio chaotic system.     

High-pressure effect on the crystal and magnetic structure of LuMnO3: Correlation between a distortion of the triangular lattice and the symmetry of the magnetic state in hexagonal frustrated manganites

The effect of a high pressure (up to 6 GPa) on the crystal and magnetic structure of the hexagonal manganite LuMnO₃ is studied by neutron diffraction in the temperature range 10–295 K. It is found that, as the pressure increases, the ordered magnetic moment of Mn ions at T = 10 K decreases noticeably from 2.48 (0 GPa) to 1.98 μ_B (6 GPa). This decrease is due to an enhancement of the geometrical frustration effects on the triangular lattice. At the same time, the symmetry of the triangular antiferromagnetic state (the irreducible representation Γ₂) remains unchanged. A correlation is revealed between the distortion parameter of the triangular lattice formed by Mn ions and the symmetry of the antiferromagnetic state of hexagonal manganites RMnO₃. Based on this correlation, a generalized magnetic phase diagram of these compounds is constructed. The obtained phase diagram provides an explanation for the changes observed in the magnetic state of hexagonal manganites caused by high pressure and chemical substitution.     

Unexpected end‐groups of poly(acrylic acid) prepared by RAFT polymerization

Low‐molecular‐weight poly(acrylic acid) (PAA) was synthesized by reversible addition fragmentation chain transfer polymerization with a trithiocarbonate as chain‐transfer agent (CTA). With a combination of NMR spectroscopy and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, the PAA end‐groups of the polymer were analyzed before and after neutralization by sodium hydroxide. The polymer prior to neutralization is made up of the expected trithiocarbonate chain‐ends and of the H‐terminated chains issued from a reaction of transfer to solvent. After neutralization, the trithiocarbonates are transformed into thiols, disulfides, thiolactones, and additional H‐terminated chains. By quantifying the different end‐groups, it was possible to demonstrate that fragmentation is the rate limiting step in the transfer reaction. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5439–5462, 2004     

Influence of Particle Morphology and Flow Conditions on the Dispersion Behavior of Fumed Silica in Silicone Polymers

The dispersion behavior of agglomerates of several grades of fumed silica in poly(dimethyl siloxane) liquids has been studied as a function of particle morphology and applied flow conditions. The effects of primary particle size and aggregate density and structure on cohesivity were probed through tensile and shear strength tests on particle compacts. These cohesivity tests indicated that the shear strength of particle compacts was two orders of magnitude higher than the tensile strength at the same overall packing density. Experiments carried out in both steady and time‐varying simple‐shear flows indicate that dispersion occurs through tensile failure. In the steady‐shear experiments,enhanced dispersion was obtained at higher levels of applied stress and, at comparable levels of applied stress, dispersion was found to proceed faster at higher shear rates. Experiments conducted in time‐varying flows further corroborated the results obtained in tensile cohesivity tests. Experiments in which the mean and maximum stresses in the time‐varying flows were matched to the stresses produced in steady shear flows highlight the influence of flow dynamics on dispersion behavior.     

UV curing of a novel resin derived from poly(ethylene terephthalate)

The synthesis and characterization of photopolymerizable unsaturated polyester resins based on PET waste are described. The resins came from a depolymerization process based on the glycolysis of PET by diethylene glycol (DEG). Different molecular weights of glycolysates were synthesized. Then, the latter was functionalized by a methyl hemiester of maleic acid to obtain unsatured α,ω‐bismaleate PET oligomers. In the presence of an electron donor monomer, such as triethylene glycol divinyl ether, these electron acceptor oligomers were copolymerized by way of charge‐transfer complexes under UV irradiation. The reaction was monitored in situ by real‐time IR spectroscopy to study the kinetics of photopolymerization. This one was studied in relation with the physical and chemical characteristics of oligoesters and the composition of mixtures containing divinyl ethers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1324–1335, 2007     

Elevation of the glass transition temperature in flexible‐chain semicrystalline polymers

In the idealized two‐phase model of a semicrystalline polymer, the amorphous intercrystalline layers are considered to have the same properties as the fully‐amorphous polymer. In reality, these thin intercrystalline layers can be substantially influenced by the presence of the crystals, as individual polymer molecules traverse both crystalline and amorphous phases. In polymers with rigid backbone units, such as poly(etheretherketone), PEEK, previous work has shown this coupling to be particularly severe; the glass transition temperature (T_g) can be elevated by tens of degrees celsius, with the magnitude of the elevation correlating directly with the thinness of the amorphous layer. However, this connection has not been explored for flexible‐chain polymers, such as those formed from vinyl‐type monomers. Here, we examine T_g in both isotactic polystyrene (iPS) and syndiotactic polystyrene (sPS), crystallized under conditions that produce a range of amorphous layer thicknesses. T_g is indeed shown to be elevated relative to fully‐amorphous iPS and sPS, by an amount that correlates with the thinness of the amorphous layer; the magnitude of the effect is severalfold less than that in PEEK, consistent with the minimum lengths of polymer chain required to make a fold in the different cases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1198–1204, 2007     

Limit distribution of the number of consecutive records

A succinct series expression is derived for describing the limit distribution of the number of times r consecutive elements are all records (in a sequence of independent and identically distributed random variables with a common continuous distribution) for all r ≥ 2. Previously, only the limit distributions for r = 1, 2, and 3 were known. © 2005 Wiley Periodicals, Inc. Random Struct. Alg., 2005