Quasi-chemical treatment of intermediate phases appearing in nonstoichiometric compounds

A quasi-chemical treatment of the superlattice formation model is applied to intermediate phases appearing in nonstoichiometric compounds. Two kinds of interaction energy are introduced and both the intermediate phase and two-phase separation are described in a single formula. The order parameter and the free energy are obtained as a function of temperature and composition. The boundaries of phases are determined by the common-tangent method.     

Superabsorbent hydrogel composites

A new cost‐effective approach to enhance gel strength of superabsorbent hydrogels was invented. Superabsorbent hydrogel composites (SHCs) were prepared through an optimized rapid solution polymerization of concentrated partially neutralized acrylic acid in the presence of a crosslinking agent under normal atmospheric conditions. Kaolin was used as an inorganic component in the polymerization process to strengthen the hydrogel products. FT‐IR spectroscopy was used to confirm grafting of acrylic chains on to the surface of kaolin particles. Morphology of the products was studied by scanning electron microscopy (SEM). Compared with the kaolin‐free hydrogel (control), kaolin caused a reduced equilibrium swelling and swelling rate as low as 17–31% and 19–29%, respectively. Kaolin, however, resulted in enhanced gel strength as high as 21–35% compared to the control. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to study thermal properties of the composites. The SHCs exhibited higher thermal stability than the control. Meanwhile, changes in certain thermal transitions reconfirmed the chemical interaction of the acrylic chain with kaolin. These thermostabilized strengthened superabsorbent hydrogels may be considered as good candidates for agricultural application to retain more water under soil pressure. Copyright © 2003 John Wiley & Sons, Ltd.     

Carbon‐based Nanosensors for Salicylate Determination in Pharmaceutical Preparations

Thiourea derivative‐based carbon paste electrode (TUD1‐CPE) was constructed as a potentiometric sensor for the determination of salicylate anion in pharmaceutical formulations, Aspocid® and Aspirin®. The optimized CPE contained 45.5 % graphite, 0.5 % reduced graphene oxide (rGO), 46.0 % nitrophenyl octyl ether (NPOE) plasticizer, 5.0 % TUD1 ionophore, and 3.0 % tridodecylmethyl ammonium chloride as additive. The incorporation of NPOE of high dielectric constant, and rGO in electrode caused better performance of the sensor; Nernstian response of 59.0 mV decade^?1 in the concentration range of 10^?1–10^?5 mole L^?1, a detection limit of 1×10^?5 mole L^?1 in a very short response time of 6 seconds. The prepared sensor showed high selectivity against similar anions (i. e. , benzoate, I^?, SCN^?). Selectivity was confirmed by calculating the formation constant (K_β) using sandwich membrane method, where K_β for TUD1‐salicylate is 10^0.43. Theoretical calculations at DFT‐B3LY/6‐31G** level of theory were performed to find interaction mechanism, Energies of HOMO and LUMO orbitals, non‐linear optical (NLO) properties (the electronic dipole moment (μ), first‐order hyperpolarizability (β), the hyper‐Rayleigh scattering (β_HRS) and the depolarization ratio (DR)), and other global properties; these calculations showed lower values of β and DR, higher value of β_HRS, and the shortest lengths of the four N?H bonds between TUD1 and salicylate which confirm their strong complexation and salicylate‐selectivity. Also, all the studied anion‐TUD1 exhibited relatively high NLO properties, and these results were considered as a preliminary study for investigating new types of NLO bearing materials. The sensors were applied successfully for the determination of salicylate anion in Aspocid® and Aspirin®.     

Cycloarsanes (AsCF3)n (n = 4, 5) – Precursors for the Highly Reactive Diarsene F3CAs=AsCF3

Tetrakis(trifluoromethyl) cyclotetraarsane (F₃CAs)₄ ( 2 ) was used to repeat the UV initiated [4+2]‐cycloaddition reaction of the diarsene F₃CAs=AsCF₃ ( 1 ) with cyclohexa‐1,3‐diene (CHD) and to isolate single crystals of the cycloadduct 4 for a X‐ray diffraction analysis. 4 crystallizes in the space group and contains the diarsene group in its E‐configuration. 2 was also applied for [2+2]‐cycloaddition reactions of 1 with tBuC≡P and MeC≡CNⁱPr₂, but in contrast to positive results with (F₃CP)₄ the products were too labile for isolation. However, 2 was successfully used at room temperature as precursor for coordinating 1 as π‐donor ligand to the Pd(PPh₃)₂ complex fragment yielding η²‐bis(trifluoromethyl)diarsene‐bis(triphenylphosphane)‐palladium(0) 5 , which was characterized by X‐ray diffraction of single crystals and by spectroscopic investigations (NMR, IR, MS). Attempts to prove the existence of the diarsene 1 , generated by different methods, by spectroscopic studies very probably failed due to its extreme reactivity, not allowing the necessary concentrations for detection. Quantum chemical calculations of the stability of 1 with respect to dimerization, the stability of the [2+2]‐cycloadduct with 1‐di(isopropyl)aminopropyne and the energy difference between 4 and the 2,3‐dimethyl‐1,3‐butadiene cycloadduct of 1 were performed to understand the considerable differences between 1 and the related diphosphene F₃CP=PCF₃.     

辐照温度对聚芳醚酮辐射交联行为的影响

<正> 可溶性含酚酞侧基聚芳醚酮(PEK-C)是一种新型的具有耐高温、耐水解、耐化学腐蚀、自润滑性能的工程塑料,它具有如下结构:     

Localized molecular orbital studies of certain compounds with [A_3X_3] six-membered rings

The localized molecular orbitals (LMOs) of certain quasi-aromatic organic and inor-ganic molecules with six-membered rings have been calculated by virtue of the ab initio methodusing STO-3G and 4-31G basis sets as well as the CNDO/2 method. It is shown that there existsextensively-delocalized p-pπ bonding in these quasi-aromatic systems. The localized pictures ofthe π-type LMOs for the heterocyclic and homocyclic systems from the σ-π localization schemeare discussed. The Generator Orbital approach is utilized to account for the bonding patterns.     

The structure of enopeptins A and B, novel depsipeptide antibiotics

The structures of enopeptins A and B, novel depsipeptide antibiotics with 1,3,5,7,9-decapentaene-1,10-dicarboxylic acid and 2-amino-3-hydroxycyclopent-2-enone in a side chain, were determined by chemical and spectroscopic means.     

Copolymerization of 2-methylene-4-phenyl-1,3-dioxolane with electrophilic vinyl monomers through zwitterionic mechanism

Spontaneous copolymerization of cyclic ketene acetal, 2-methylene-4-phenyl-1,3-dioxolane ( I ) with common electrophilic vinyl monomers, such as methyl α-cyanoacrylate (MCA), acrylonitrile (AN), and methyl methacrylate (MMA) were investigated to further explore zwitterion polymerization method with cyclic ketene acetals. In the reaction of I with MCA and AN, spontaneous copolymerization took place at ambient temperature. The copolymers of I with MCA gave low molecular weight polymers, but copolymers obtained with I and AN were high molecular weight polymers. In the reaction of I and MMA, high molecular weight copolymer was obtained only at temperatures above 80°C. Thus, obtained polymers were not the alternating copolymers and possessed high I content in all the cases. From the above results, macrozwitterionic mechanism was suggested as discussed.     

Solubility Measurements of Surfactants and Dissolution of Cytochrome c in 1,1,1,2‐Tetrafluoroethane Modified with Organic Solvents

The solubilities of four surfactants, sodium bis‐2‐ethylhexyl sulfosuccinate (AOT), cetyltrimethylammonium chloride, didodecyldimethylammonium bromide, and n‐dodecyltrimethylammonium chloride in liquid refrigerant 1,1,1,2‐tetrafluoroethane (R134a) modified with methanol, ethanol, and 2‐propanol were measured. The measurements were performed under 25 and 50 bar at 25 °C. The solubility of AOT was as high as 92 mM in R134a with addition of 2% ethanol. Cytochrome c molecules were then verified to be soluble in the AOT‐containing and ethanol‐modified R134a solution. Accordingly, liquid R134a is suggested as a potential extraction solvent for hydrophilic compounds.     

RNA Methylation m6A: A New Code and Drug Target?

The m⁶A‐RNA modification is a dynamic and reversible process, which has emerged as a new RNA code for the regulation of gene expression. The functional network of methyltransferases (writers), demethylases (erasers), and binding proteins (readers) modulate the level of m⁶A modification. Dysfunction of RNA methylation has been associated with various fundamental biological processes and human diseases. Herein, we briefly introduce an understanding‐enabled manipulation on m⁶A‐RNA modification with an emphasis on the use of small‐molecule intervention.