Atomic structure of Cs layer grown on Si(0 0 1)(2 × 1) surface at room temperature

The atomic structure of Cs atoms adsorbed on the Si(0 0 1)(2 × 1) surface has been investigated by coaxial impact collision ion scattering spectroscopy. When 0.5 ML of Cs atoms are adsorbed on Si(0 0 1) at room temperature, it is found that Cs atoms occupy a single absorption site on T3 with a height of 3.18 ± 0.05 Å from the second layer of Si(0 0 1)(2 × 1) surface, and the bond length between Cs and the nearest Si atoms is 3.71 ± 0.05 Å.     

Y2SiO5:Tb phosphor particles prepared from colloidal and aqueous solutions by spray pyrolysis

Green-emitting Y₂SiO₅:Tb phosphor particles with fine size, spherical shape, filled morphology, high crystallinity, and good brightness were synthesized by a spray pyrolysis process. The effect of silicon precursor type on the morphology, crystal structure, crystallinity, and photoluminescence efficiency of Y₂SiO₅:Tb phosphor particles was investigated. The particles prepared from an artificial colloidal solution obtained by dispersing fumed silica particles had a pure monoclinic X2 crystalline phase, which is more appropriate for application to displays, after post-treatment at 1300 °C. On the other hand, the particles prepared from 100% tetraethyl orthosilicate (TEOS) reagent had an X2 phase and small amounts of X1 and impurity phases such as Y₂Si₂O₇ and Y_4.67Si₃O₁₃ due to the phase-segregation characteristics of the TEOS precursor. The photoluminescence characteristics of Y₂SiO₅:Tb phosphor particles were strongly affected by the silicon source used. The photoluminescence intensities increased with the fumed silica/TEOS ratio. The particles prepared from 100% fumed silica showed the maximum photoluminescence intensity, which is 22% higher than that of particles prepared from 100% TEOS. PACS 81.20.Rg; 78.55.Hx; 78.40.Ha; 81.05.Hd; 81.40.Tv     

Generation of 0.2-TW 5.5-fs optical pulses at 1 kHz using a differentially pumped hollow-fiber chirped-mirror compressor

Optical pulses with 1.1-mJ energy and 5.5-fs duration have been generated at 1-kHz repetition rate from a chirped pulse amplification Ti:Sapphire laser incorporating a differentially pumped hollow-fiber chirped-mirror compressor. The effects of self-focusing and multi-photon ionization during the beam propagation were minimized by differentially pumping the hollow fiber filled with neon. The spectral broadening at the hollow-fiber compressor was optimized by adjusting gas pressure, laser intensity, and laser chirp, covering from 540 nm to 950 nm. PACS 42.65.Jx; 42.65.Re     

Comparative analysis of the effects of internal lasing oscillation and external light injection on semiconductor optical amplifier performance

One of the key differences of a semiconductor optical amplifier (SOA) with internal lasing oscillation (ILO) from a SOA with external light injection (ELI) lies in a carrier-sharing mechanism. Since the internal lasing mode shares the same pool of carriers with the signals, the carriers (or photons) withdrawn from the circulating laser mode speed up the gain recovery. On the other hand, the external light injected into the SOA shortens the carrier recovery time through optical pumping without any carrier sharing involved. To find out a better scheme, we have made a comparative investigation on the effects of the ILO and ELI on the SOA performance. It turns out by way of simulation that the ELI scheme provides faster gain recovery, shorter carrier lifetime, and higher saturation power when the external injection power is higher than the internal lasing power. The performance enhancement is not so pronounced with the carrier-sharing mechanism, as the internal lasing mode itself gives rise to severe longitudinal spatial hole burning (LSHB). Nevertheless, the ILO scheme is preferable for linear-amplification applications. We also examine the use of the ELI for low-crosstalk optical amplifiers. It is found that the ELI scheme does not bring in a very strong resonance peak in the crosstalk, which appears in a SOA with ILO due to relaxation oscillations of the lasing mode. In comparison to the ILO in SOAs, the ELI into SOAs is likely to leave more optical gain for multi-channel amplification without any sacrifice on the crosstalk.     

Optical properties of bulk Zn1−xCoxO magnetic semiconductors

Polycrystalline Zn_1−xCo_xO (x=0, 0.02, 0.05, 0.10 and 0.15) oxides have been synthesized by solid state reaction via sintering ZnO and Co powders in open air. X-ray diffraction analyses using Rietveld refinement indicate that a stoichiometric single phase with a wurtzite-like structure was found in Zn_1−xCo_xO samples with x up to 0.10. The elemental mapping using energy dispersive X-ray spectroscopic analyses presents a uniform distribution of Co. Optical transmittance measurements show that several extra absorption bands appear in the Co-doped ZnO, which is due to the transitions between the crystal-field-split 3d levels of tetrahedral Co²⁺ substituting Zn²⁺ ions. Raman measurements show that limited host lattice defects are induced by Co doping. Magnetization measurements reveal that the Co-doped ZnO samples are paramagnetic due to the absence of free carriers and in low temperature the dominant magnetic interaction is nearest-neighbor antiferromagnetic.     

Temperature effect on deposition rate of silicon nitride films

Temperature effects on deposition rate of silicon nitride films were characterized by building a neural network prediction model. The silicon nitride films were deposited by using a plasma enhanced chemical vapor deposition system and process parameter effects were systematically characterized by 2⁶⁻¹ fractional factorial experiment. The process parameters involved include a radio frequency power, pressure, temperature, SiH₄, N₂, and NH₃ flow rates. The prediction performance of generalized regression neural network was drastically improved by optimizing multi-valued training factors using a genetic algorithm. Several 3D plots were generated to investigate parameter effects at various temperatures. Predicted variations were experimentally validated. The temperature effect on the deposition rate was a complex function of parameters but N₂ flow rate. Larger decreases in the deposition rate with the temperature were only noticed at lower SiH₄ (or higher NH₃) flow rates. Typical effects of SiH₄ or NH₃ flow rate were only observed at higher or lower temperatures. A comparison with the refractive index model facilitated a selective choice of either SiH₄ or NH₃ for process optimization.     

Crystallinity and morphology dependent luminescence of Li-doped Y2−xGdxO3:Eu thin film phosphors

The influence of lithium doping on the crystallization, the surface morphology, and the luminescent properties of pulsed laser deposited Y_2−xGd_xO₃:Eu³⁺ thin film phosphors was investigated. The crystallinity, the surface morphology, and the photoluminescence (PL) of films depended highly on the Li-doping and the Gd content. The relationship between the crystalline and morphological structures and the luminescent properties was studied, and Li⁺ doping was found to effectively enhance not only the crystallinity but also the luminescent brightness of Y_2−xGd_xO₃:Eu³⁺ thin films. In particular, the incorporation of Li and Gd into the Y₂O₃ lattice could induce remarkable increase in the PL. The highest emission intensity was observed Li-doped Y_1.35Gd_0.6O₃:Eu³⁺ thin films whose brightness was increased by a factor of 4.6 in comparison with that of Li-doped Y₂O₃:Eu³⁺ thin films.     

In situ transmission electron microscopy study of the nucleation and grain growth of Ge2Sb2Te5 thin films

The nucleation and grain growth of the Ge₂Sb₂Te₅ (GST) thin films were studied using high voltage electron microscope operated at 1250 kV. As a result, we have found that 2 nm-sized nucleus forms as a cluster which atoms are arranged regularly at the stage of nucleation prior to the formation of grains having crystal structure. The high-resolution transmission electron microscopy study and fast-Fourier transformations revealed that coexistence of face-centered-cubic (FCC) and hexagonal structure occurs, and formation of twin defect is found in the hexagonal structure during the grain growth as the annealing temperature is increased. GST grain having the hexagonal structure grow from the surface, and the growth proceeded perpendicular to the [0 0 0 1], namely the path parallel to the (0 0 0 1) plane. Consequently, grain growth to a large-scale result in a lengthened shape.     

Enhanced ferromagnetic properties of diluted Fe doped ZnO with hydrogen treatment

The single-phase diluted magnetic Fe-ion (5%) doped ZnO powders were prepared by solid-state reaction method. The powders were annealed in Ar or Ar/H₂(5%) atmosphere at 1200 °C. The crystal structure, electric and magnetic properties for the Zn_0.95Fe_0.05O powders have been studied with X-ray diffraction (XRD) vibrating sample magnetometer, resistance and Hall measurement. All the peaks for the XRD pattern of samples belong to the hexagonal (P6₃mc) lattice of ZnO, and no indication of a secondary phase. The lattice parameters for the Zn_0.95Fe_0.05O with an annealing in Ar/H₂(5%) atmosphere were a₀=3.256 Å and c₀=5.206 Å at room temperature. The hysteresis curve for the Zn_0.95Fe_0.05O at room temperature was enhanced ferromagnetic behaviour with an annealing in Ar/H₂(5%) atmosphere. We give an explanation for enhanced ferromagnetic behaviour with H₂ treatment by electric properties.