The preparation of nanophase tungsten carbide powder with zeolite-X catalysts

The reduction–carburization of tungsten trioxide (WO₃) under carbon monoxide flow was studied in the temperature range of 300–750 °C. The reduction–carburization of WO₃ was improved by mechanically mixing with zeolite-HX, -NaX and -KX. The interaction between cation in zeolite-X and oxygen in WO₃ affected the improvement of the reduction–carburization of WO₃ to WC. Moreover, the improved reduction–carburization of WO₃ could lead to the decrease of reaction temperature. Because the particle size of WC is in contact with a reaction temperature, the nanophase WC can be prepared at low temperature. In particular, the particle size of WC was controlled by reaction temperature. The particle sizes of produced WC at 550, 650 and 700 °C were 25, 50 and 100 nm respectively.     

Measuring inter-DNA potentials in solution

Interactions between short strands of DNA can be tuned from repulsive to attractive by varying solution conditions and have been quantified using small angle x-ray scattering techniques. The effective DNA interaction charge was extracted by fitting the scattering profiles with the generalized one-component method and inter-DNA Yukawa pair potentials. A significant charge is measured at low to moderate monovalent counterion concentrations, resulting in strong inter-DNA repulsion. The charge and repulsion diminish rapidly upon the addition of divalent counterions. An intriguing short range attraction is observed at surprisingly low divalent cation concentrations, approximately 16 mM Mg2+. Quantitative measurements of inter-DNA potentials are essential for improving models of fundamental interactions in biological systems.     

Search for exclusive multibody non- decays at the resonance

Using data collected at the psi(3770) resonance with the CLEO-c detector at the Cornell e+e- storage ring, we present searches for 25 charmless decay modes of the psi(3770), mostly multibody final states. No evidence for charmless decays is found.     

A Rat’s Image Using Multichannel Phase Array RF Coil Specifically Designed for Animals: Focused on a Pulse Sequence and Mediator Variable

The study focuses on finding the pulse sequences depicting a rat’s tumor when the size of the field of view was reduced, using coils specifically designed for rats, and obtaining an optimized image of a rat by transforming the parameters, according to each pulse sequence. The manufactured coil is 8-channel phased array coils, and the type is a receive-only coil. The diameter of the coil is 80 mm, and the length is 150 mm. The overlapped distance among each channel was 8 mm, and the lab rats used in the experiment were the commonly used Sprague–Dawley rats. The study used three types of pulse sequences, which are the diffusion weight imaging (DWI), three-dimensional dual echo steady state (3-D DESS), and three-dimensional volumetric interpolated breath-hold (3-D VIBE). Along with the DWI results, pulse sequences of 3-D DESS and 3-D VIBE enabled to distinguish the tumors from that of normal tissues in the brain by optimizing a mediator variable and to illustrate the whole body imaging of a rat.     

A voltage-controlled chaotic oscillator based on carbon nanotube field-effect transistor for low-power embedded systems

This paper presents a compact and low-power-based discrete-time chaotic oscillator based on a carbon nanotube field-effect transistor implemented using Wong and Deng＇s well-known model. The chaotic circuit is composed of a nonlinear circuit that creates an adjustable chaos map, two sample and hold cells for capture and delay functions, and a voltage shifter that works as a buffer and adjusts the output voltage for feedback. The operation of the chaotic circuit is verified with the SPICE software package, which uses a supply voltage of 0.9 V at a frequency of 20 kHz. The time series, frequency spectra, transitions in phase space, sensitivity with the initial condition diagrams, and bifurcation phenomena are presented. The main advantage of this circuit is that its chaotic signal can be generated while dissipating approximately 7.8 μW of power, making it suitable for embedded systems where many chaos-signal generators are required on a single chip.     

New device architecture of a thermoelectric energy conversion for recovering low-quality heat

Low-quality heat is generally discarded for economic reasons; a low-cost energy conversion device considering price per watt, $/W, is required to recover this waste heat. Thin-film based thermoelectric devices could be a superior alternative for this purpose, based on their low material consumption; however, power generated in conventional thermoelectric device architecture is negligible due to the small temperature drop across the thin film. To overcome this challenge, we propose new device architecture, and demonstrate approximately 60 Kelvin temperature differences using a thick polymer nanocomposite. The temperature differences were achieved by separating the thermal path from the electrical path; whereas in conventional device architecture, both electrical charges and thermal energy share same path. We also applied this device to harvest body heat and confirmed its usability as an energy conversion device for recovering low-quality heat.     

Comparison of modeling approaches to ultrasonic testing at near critical angles

Modeling of ultrasonic testing has been paid a great attention in nondestructive evaluation community recently since it can provide thorough understanding of underlying physics of ultrasonic testing. As a result, there have been developed various modeling approaches up to now. Especially, many practical models have been developed based on either the multi-Gaussian beam or the Rayleigh-Sommerfeld integral. This paper discusses the modeling of ultrasonic testing with oblique incidence at the near critical angles using these two approaches. The theoretical models that can predict the reflection signals from side drilled cylindrical holes in solid specimen immersed in water are developed. Then, the theoretical predictions for the oblique incidence at the near critical angles are compared to the experiments for the investigation of model behavior.     

Kondo effect in magnetic tunnel junctions

Tunneling magnetoresistance was found to be suppressed with decreasing temperature for magnetic tunnel junctions (MTJs) oxidized under high plasma power. A strong temperature dependence of the junction resistance was observed, along with zero-bias anomalies of dynamic resistance at low temperatures. Resistance shows a logarithmic dependence on temperature, and resistance versus temperature exhibits a scaling behavior. Our experimental data can be explained in a consistent way by the Kondo effect in the MTJs with the Kondo temperature TK=20-30 K.     

Angular and NiFe thickness dependence of exchange bias in IrMn/NiFe/IrMn thin film

Exchange biased IrMn/NiFe/IrMn thin films were studied as a function of NiFe thickness. In plane angular dependence of a resonance field distribution which is measured by FMR was analyzed as a combined effect of an unidirectional anisotropy and an uniaxial anisotropy. The unidirectional anisotropic field and the uniaxial anisotropic field were linearly varied with NiFe thickness while the films with a thicker NiFe layer do not follow the linear variation. Resonance field and linewidth variations were also analysed with NiFe thickness.     

Sidewall-insert compound based on ZnO-treated aramid pulp fibers for run-flat tires

Abstract

To improve the endurance performance of run-flat tires by preventing the sidewall from folding at zero air pressure, a master batch of natural rubber and ZnO-treated aramid pulp (AP) is applied to the rubber sidewall-insert-layer compound. The mechanical, viscoelastic, and fatigue properties of the compounds are investigated by varying the AP content, and the endurance performance of actual run-flat tires is assessed. The results indicate that the mechanical properties are improved and the hysteresis is reduced as the AP content increased. The overall trend of the endurance times of the run-flat tires is consistent with the results of the DeMattia tests, constant-strain fatigue tests, and high-temperature tensile tests. The run-flat endurance time of the tire containing one part per hundred rubber (phr) of AP is superior to that of the tire containing 3 phr of AP because of the enhanced dispersion of the AP fibers.