Dual‐micropillar‐based microfluidic platform for single embryonic stem cell‐derived neuronal differentiation

We developed the dual‐micropillar‐based microfluidic platform to direct embryonic stem (ES) cell fate. 4 × 4 dual‐micropillar‐based microfluidic platform consisted of 16 circular‐shaped outer micropillars and 8 saddle‐shaped inner micropillars in which single ES cells were cultured. We hypothesized that dual‐micropillar arrays would play an important role in controlling the shear stress and cell docking. Circular‐shaped outer micropillars minimized the shear stress, whereas saddle‐shaped inner micropillars allowed for docking of individual ES cells. We observed the effect of saddle‐shaped inner micropillars on cell docking in response to hydrodynamic resistance. We also demonstrated that ES cells cultured for 6 days within the dual‐micropillar‐based microfluidic platform differentiated into neural‐like cells. Therefore, this dual‐micropillar‐based microfluidic platform could be a potentially powerful method for screening of lineage commitments of single ES cells.     

Synthesis and Characterization of Iron Nanowires

The iron nanowires can be fabricated via the process in which sodium borohydride reduces iron salts in external magnetic field. The iron nanowires are found to be covered by passivated layers of iron oxide which prevent the oxidation of iron nanowires. In this process, the boron will include in iron nanowires. The average length and diameter of iron nanowires is around 1.2 micrometers and 60 nanometers, respectively. According to ICP results, the contents of B and Fe are about 1.98 wt% and 87.04 wt%, respectively, in iron nanowires. A wide variety of equipment is used to investigate the morphological, microchemical, and structural characteristics of the newly synthesized iron nanowires ––– e.g., XRD, FE‐SEM, HR‐TEM, VSM and XANES. XANES analysis indicates the boron in iron nanowires exists in the form of B₂O₃. The saturation magnetization and the coercive force of iron nanowires are 157.93 emu/g and 9.74 Oe, respectively. In‐situ images of synthesized iron nanowires during reduction process in magnetic field are observed by NSRRC transmission X‐ray microscope. Thus, this study develop a novel process to produce iron nanowires with large quantitates and can control its length and diameter by various the concentration of precursors for various applications.     

Al2O3／WO3／ZrO2固体强酸催化剂对正丁烷异构化的催化性能

 通过沉淀、回流、浸渍和焙烧等步骤制备了Al2O3／WO3／ZrO2固体强酸催化剂．采用XRD，N2吸附，UV－Vis光谱，NH3－TPD和H2－TPR等技术测定了Al2O3对WO3／ZrO2催化剂的结构、表面酸性、氧化还原性及正丁烷异构化反应性能的影响．结果表明，在WO3／ZrO2中引入适量的Al2O3对其表面酸强度及酸量无显著影响，但可使催化剂中的ZrO2组分以稳定的四方相形式存在，并能有效地抑制催化剂中WO3的聚集长大，从而提高催化剂的稳定性和正丁烷异构化的转化率和选择性．添加铂于Al2O3／WO3／ZrO2中可进一步提高其催化性能．还考察了催化剂的焙烧温度、Al含量、反应温度和反应气氛对正丁烷异构化反应的影响．     

AGR2, a mucinous ovarian cancer marker, promotes cell proliferation and migration

Ovarian cancer is a leading cause of death in women. Early detection of ovarian cancer is essential to decrease mortality. However, the early diagnosis of ovarian cancer is difficult due to a lack of clinical symptoms and suitable molecular diagnostic markers. Thus, identification of meaningful tumor biomarkers with potential clinical application is clearly needed. To search for a biomarker for the early detection of ovarian cancer, we identified human anterior gradient 2 (AGR2) from our systematic analysis of paired normal and ovarian tumor tissue cDNA microarray. We noted a marked overexpression of AGR2 mRNA and protein in early stage mucinous ovarian tumors compared to normal ovarian tissues and serous type ovarian tumors by Western blot analysis and immunohistochemistry. To further elucidate the role of AGR2 in ovarian tumorigenesis, stable 2774 human ovarian cancer cell lines overexpressing AGR2 were established. Forced expression of AGR2 in 2774 cells enhanced the growth and migration of ovarian cancer cells. AGR2 protein was detected in the serum of mucinous ovarian cancer patients by Western blot and ELISA analysis. Thus, AGR2 is a potential biomarker for the diagnosis of mucinous ovarian cancer and an ELISA assay may facilitate the early detection of mucinous ovarian cancer using patient serum.     

A high-throughput microfluidic assay to study neurite response to growth factor gradients

Studying neurite guidance by diffusible or substrate bound gradients is challenging with current techniques. In this study, we present the design, fabrication and utility of a microfluidic device to study neurite guidance under chemogradients. Experimental and computational studies demonstrated the establishment of a steep gradient of guidance cue within 30 min and stable for up to 48 h. The gradient was found to be insensitive to external perturbations such as media change and movement of device. The effects of netrin-1 (0.1-10 μg mL(-1)) and brain pulp (0.1 μL mL(-1)) were evaluated for their chemoattractive potential on neurite turning, while slit-2 (62.5 or 250 ng mL(-1)) was studied for its chemorepellant properties. Hippocampal or dorsal root ganglion (DRG) neurons were seeded into a micro-channel and packed onto the surface of a 3D collagen gel. Neurites grew into the matrix in three dimensions, and a gradient of guidance cue was created orthogonal to the direction of neurite growth to impact guidance. The average turning angle of each neurite was measured and averaged across multiple devices cultured under similar conditions to quantify the effect of guidance cue gradient. Significant positive turning towards gradient was measured in the presence of brain pulp and netrin-1 (1 μg mL(-1)), relative to control cultures which received no external guidance cue (p < 0.001). Netrin-1 released from transfected fibroblasts had the most positive turning effect of all the chemoattractive cues tested (p < 0.001). Slit-2 exhibited strong chemorepellant characteristics on both hippocampal and DRG neurite guidance at 250 ng mL(-1) concentration. Slit-2 also showed similar behavior on DRG neuron invasion into 3D collagen gel (p < 0.01 relative to control cultures). Taken together, the results suggest the utility of this microfluidic device to generate stable chemogradients for studying neurobiology, cell migration and proliferation, matrix remodeling and co-cultures with other cell lines, with potential applications in cancer biology, tissue engineering and regenerative medicine.     

Airborne particulates (PM2.5/PM10) monitoring in Korea by instrumental neutron activation analysis

Instrumental neutron activation analysis was used for the analysis of 25 trace elements in airborne particulate matter (PM) for air pollution monitoring. For the collection of air samples, the Gent stacked filter unit low volume sampler and two types of Nuclepore polycarbonate filters were employed. Samples were collected at selected sampling dates in suburban and industrial regions of Daejon city in the Republic of Korea. Mass concentrations and black carbon of PM were measured, and enrichment factors were calculated. The results were used to describe the emission sources and their correlation patterns.     

Synthesis and Biological Evaluation of Novel Isonucleosides with 1,2,4‐Triazole‐3‐Carboxamide

Novel 1,2,4‐triazole isonucleosides (1 and 2) were efficiently synthesized starting from D‐ribose and D‐xylose, respectively. The key steps were condensation of cyclic sulfate 8 with methyl‐1,2,4‐triazole‐3‐carboxylate and nucleophilic displacement of the tosylate 15 with methyl‐1,2,4‐triazole‐3‐carboxylate, respectively.     

Metallocene-mediated synthesis of chain-end functionalized polypropylene and application in PP/clay nanocomposites

This paper summarizes our research in the preparation of chain end functionalized isotactic polypropylene (PP) having a terminal functional group, such as Cl, OH, and NH₂. The chemistry involves metallocene-mediated propylene polymerization using rac-Me₂Si[2-Me-4-Ph(Ind)]₂ZrCl₂/MAO complex in the presence of styrene derivatives (St-f) and hydrogen, which serve as the chain transfer agents. The molecular weight of the resulting PP polymers with a terminal Cl, OH and NH₂ group (i.e., PP-t-Cl, PP-t-OH and PP-t-NH₂) are inversely proportional to the molar ratio of [St-f]/[propylene]. Despite the extremely low concentration of functional group, the high molecular weight chain end functionalized PP-t-OH and exhibit a distinctive advantage over other functional PP polymers containing side chain functional groups or long functional blocks. The terminal hydrophilic OH and cations, with good mobility and reactivity, effectively hydrogen bond and ion-exchange the cations (Li⁺, Na⁺, etc.) located between the clay interlayers, respectively. Such interactions anchor the PP chain to the clay surfaces. On the other hand, the remaining rest of the unperturbed end-tethered high molecular weight PP tail exfoliates the clay layers. This exfoliated structure is maintained even after further mixing of the PP-bearing platelets with pure neat PP polymers.