Residual determination and risk assessment of buprofezin in plum (Prunus domestica) grown in open‐field conditions following the application of three different formulations

This study was conducted to characterize the residual level and perform a risk assessment on buprofezin formulated as an emulsifiable concentrate, wettable powder, and suspension concentrate over various treatment schedules in plum (Prunus domestica). The samples were extracted with an AOAC quick, easy, cheap, effective, rugged, and safe, ‘QuEChERS’, method after major modifications. As intrinsic interferences were observed in blank plum samples following dispersive‐solid phase extraction (consisting of primary secondary amine and C₁₈ sorbents), amino cartridges were used for solid‐phase extraction. Analysis was carried out using liquid chromatography with diode array detection and confirmed by liquid chromatography–tandem mass spectrometry. The method showed excellent linearity with determination coefficient (R² = 1) and satisfactory recoveries (at two spiking levels, 0.5 and 2.5 mg/kg) between 90.98 and 94.74% with relative standard deviation (RSD) ≤8%. The limit of quantification (0.05 mg/kg) was considerably lower than the maximum residue limit (2 mg/kg) set by the Codex Alimentarius. Absolute residue levels for emulsifiable concentrates were highest, perhaps owing to the dilution rate and adjuvant. Notably, all formulation residues were lower than the maximum residue limit, and safety data proved that the fruits are safe for consumers. Copyright © 2016 John Wiley & Sons, Ltd.     

ESR Studies of λ-Irradiated Poly[3,3-bis(chloromethyl)oxetane]

Poly[3,3-bis(chloromethyl)] oxetane in vacuo, after λ-irradiation at 77°K and room temperature, showed ESR spectra consisting of a triplet (hfs of 22.0G) and a doublet (hfs of 17.8G), respectively. The triplet ESR spectrum is attributed to the -CH₂-C(CH₂Cl)-CH₂ -O- radical and the doublet ESR spectrum is attributed to the -CH₂-C(CH₂Cl)₂-CH-O- radical. The G values for formation of radicals are estimated to be 0.3 and 0.5 at 298 and 77°K, respectively.     

Patterning Surfaces for Controlled Platelet Adhesion and Detection of Dysfunctional Platelets

Platelets play a fundamental role in thrombus formation and in the pathogenesis of arterial thrombosis. Patterning surfaces for controlled platelet adhesion paves the way for adhesion and activation mechanisms in platelets and detection of platelet functional defects. Here, a new and simple method based on controlled polymerization of 2‐methacryloyloxyethyl phosphorylcholine (MPC) on the surface of styrene‐block‐(ethylene‐co‐butylene)‐block‐styrene (SEBS) is shown. The competition between polymerization and degradation enables platelet adhesion on SEBS to be switched on and off. The adhesive sites of the platelets can be down to single cell level, and the dysfunctional platelets can be quantitatively detected.

     

Quantitative LC–MS/MS method in urine for the detection of drugs used to reverse the effects of chemical castration

The chemical castration law, which targets child molesters with recidivism, was introduced in Korea in 2011. For this, leuprolide, a gonadotropin-releasing hormone agonist, is used to decrease testosterone production and suppress libido. In order to achieve efficient law enforcement, it is necessary to monitor intentional ingestion of drugs that antagonize the effect of leuprolide. Therefore, an analytical method for the simultaneous detection of mirodenafil, sildenafil, tadalafil, udenafil, vardenafil, icariin, alprostadil, and yohimbine, which are the major impotence treatment drugs, legitimately or otherwise, in Korea, as well as their selected metabolites, in human urine was established and validated using liquid chromatography–tandem mass spectrometry (LC–MS/MS). First, different sample preparation methods, two solid-phase extractions with different cartridges and protein precipitation, were compared and protein precipitation was chosen for the entire study because it showed better matrix effects and recoveries. Thus, the drugs and metabolites in urine were extracted by protein precipitation and then filtered and analyzed by LC–MS/MS with polarity switching electrospray ionization. The validation results of selectivity, matrix effect, recovery, linearity, intra- and inter-assay precision and accuracy were satisfactory. The limits of detection ranged from 0.25 to 10 ng/mL, and the limits of quantification were 2.5 to 50 ng/mL. The drugs and metabolites in urine did not show any degradation under storage for 7 and 15 days at 4 and ?20 °C as well as after three freeze–thaw cycles. The developed method will be very useful for monitoring the illegal use of impotence treatment drugs.     

Transport Polymerization of Gaseous Intermediates and Polymer Crystals Growth

Man is always enchanted with discoveries of new and better ways of making things. Even after more than a hundred years of synthetic chemistry, scientists are today still as enthusiastic as ever looking for “novel” reactions and “novel” syntheses. One of the great achievements of the last decade was the development and usage of “intermediates” for syntheses. Knowing the extensive applications [1-4] of these intermediates in modern synthetic chemistry, it is, however, surprising to find that only few groups of these intermediates have been used in polymer syntheses. For instance [5], even though there are radical polymerizations and polymerizations involving carbanions and carbonium ions, there are practically no polymer syntheses using benzynes [2], carbenes [3], or nitrenes [4].     

Effects of experimental conditions on the molecular composition of maltenes and asphaltenes derived from oilsands bitumen: Characterized by negative-ion ESI FT-ICR MS

A vacuum topped Canadian oilsands bitumen (VTB) was subjected to solvent precipitation and subsequently characterized by elemental analysis, gel permeation chromatograph (GPC), 1 H-NMR spectroscopy and negative-ion electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Effects of experimental conditions such as solvent types (n-C5 , n-C6 , and n-C7 ), solvent purity, and solvent washing time on asphaltenes yields, bulk composition, and molecular composition of detectable heteroatom compounds in ESI source were determined. Elemental nitrogen and sulfur were enriched in asphaltenes while elemental oxygen had comparable content in maltenes and asphaltenes. Molecular composition of asphaltenes varies with separation conditions. The N1 and O1 species identified by ESI FT-ICR MS were enriched in maltenes. The O2 species exhibited two different double bond equivalents (DBE) distributions and solubility in normal paraffin solvents, indicating two types of molecular structures. Multi oxygen atom containing compounds mainly detected in asphaltenes. Compound class distributions are similar for maltenes derived from n-C5 , n-C6 , and n-C7 , as well as for asphaltenes. The cyclic paraffin impurities in normal paraffin solvents had a significant influence on asphaltenes yields and heteroatom molecular composition. A portion of neutral N1 species and acidic O2 species adsorbed on asphaltenes could be dissolved by increasing washing time. Cautions should be exercised when interpreting the properties and composition of asphaltenes obtained with different experimental conditions.     

Trigonal‐Bipyramidal and Square‐Pyramidal Chromium?Manganese Chalcogenide Clusters, [E2CrMn2(CO)n]2− (E=S,Se, Te; n=9, 10): Synthesis,Electrochemistry, UV/Vis Absorption,and Computational Studies

The reactions of E powder (E=S, Se) with a mixture of Cr(CO)₆ and Mn₂(CO)₁₀ in concentrated solutions of KOH/MeOH produced two new mixed Cr? Mn? carbonyl clusters, [E₂CrMn₂(CO)₉]^2? (E=S, 1 ; Se, 2 ). Clusters 1 and 2 were isostructural with one another and each displayed a trigonal‐bipyramidal structure, with the CrMn₂ triangle axially capped by two μ₃‐E atoms. The analogous telluride cluster, [Te₂CrMn₂(CO)₉]^2? ( 3 ), was obtained from the ring‐closure of Te₂Mn₂ ring complex [Te₂Mn₂Cr₂(CO)₁₈]^2? ( 4 ). Upon bubbling with CO, clusters 2 and 3 were readily converted into square‐pyramidal clusters, [E₂CrMn₂(CO)₁₀]^2? (E=Se, 5 ; Te, 6 ), accompanied with the cleavage of one Cr? Mn bond. According to SQUID analysis, cluster 6 was paramagnetic, with S=1 at room temperature; however, the Se analogue ( 5 ) was spectroscopically proposed to be diamagnetic, as verified by TD‐DFT calculations. Cluster 6 could be further carbonylated, with cleavage of the Mn? Mn bond to produce a new arachno‐cluster, [Te₂CrMn₂(CO)₁₁]^2? ( 7 ). The formation and structural isomers, as well as electrochemistry and UV/Vis absorption, of these clusters were also elucidated by DFT calculations.     

New discrimination method combining hit quality index based spectral matching and voting

A new discrimination method, called hit quality index (HQI)-voting, that uses the HQI for discriminant analysis has been developed. HQI indicates the degree of spectral matching between two spectra as known. In this method, a library sample yielding the highest HQI value for an unknown sample was initially searched and a group containing this sample was chosen as the group for the unknown sample. When overall spectral features of two groups are quite close to each other, many library samples with similar HQI values could be available for an unknown sample. In this situation, the simultaneous consideration of multiple votes (several library samples with close HQI values) for final decision would be more robust. In order to evaluate the discrimination performance of HQI-voting, three different near-infrared (NIR) spectroscopic datasets composed of two sample groups were used: (1) domestic and imported sesame samples, (2) domestic and imported Angelica gigas samples, and (3) diesel and light gas oil (LGO) samples. For the purpose of comparison, principal component analysis–linear discriminant analysis (PCA–LDA), partial least squares–discriminant analysis (PLS–DA) as well as k-nearest neighbor (k-NN) were also performed using the same datasets and the resulting accuracies were compared. The discrimination performances improved with the use of HQI-voting in comparison with those resulted from PCA–LDA and PLS–DA. The overall results support that HQI-voting is a comparable discrimination method to that of existing factor-based multivariate methods.