Effects of Zn, Al and Ti substitution on the electrochemical properties of LiNiO2 synthesized by the combustion method

LiNi_{1 ? y} Ti _y O₂ (0.000 ≤ y ≤ 0.100) and LiNi_0.990M_0.010O2 (M = Zn, Al, and Ti) were synthesized by the combustion method. The effects of Zn, Al and Ti substitution for Ni of LiNiO₂ on the electrochemical properties of LiNiO₂ were investigated. LiNi_0.995Ti_0.005O₂ has the largest first discharge capacity (188.1 mA h/g) among the Ti-substituted samples. LiNi_0.990Ti_0.010O₂ has a relatively large first discharge capacity (185.5 mA h/g) and a relatively good cycling performance. Among LiNi_0.990M_0.010O₂ (M = Ni, Zn, Al, and Ti), LiNiO₂ has the largest discharge capacities at a rate of 0.1 C from n = 1(189.3 mA h/g) to n = 10. LiNi_0.990Al_0.010O₂ has the lowest discharge capacities from n = 1 to n = 10, but it has the best cycling performance. LiNi_0.990Zn_0.010O₂ showed poor crystallinity, LiNi_0.990Ti_0.010O₂ showed high cation mixing, and LiNi_0.990Al_0.010O₂ had good crystallinity and showed low cation mixing. Fewer occurrence of phase transitions and the least change of the ?dx/|dV| vs. voltage curve at the second cycle from the curve at the first cycle of LiNi_0.990Al_0.010O₂ suggest that Al substitution stabilizes the structure and leads to a good cycling performance.     

Molecular imprinted polymers for separation science: A review of reviews

Molecular imprinted polymer is an artificial receptor made by imprinting molecules of a template in a polymer matrix followed by removing the template molecules via thorough washing to give the permanent template grooves. They show favored affinity to the template molecule compared to other molecules, and this property is the basic driving force for such diverse application of this techniques. Such techniques have been increasingly employed in a wide scope of applications such as chromatography, sample pretreatment, purification, catalysts, sensors, and drug delivery, etc., mostly in bioanalytical areas. A major part of them is related to development of new stationary phases and their application in chromatography and sample pretreatment. Embodiments of molecular imprinted polymer materials have been carried out in a variety of forms such as irregularly ground particles, regular spherical particles, nanoparticles, monoliths in a stainless steel or capillary column, open tubular layers in capillaries, surface attached thin layers, membranes, and composites, etc. There have been numerous review articles on molecular imprinted polymer issues. In this special review, the reviews in recent ca. 10 years will be categorized into several subgroups according to specified topics in separation science, and each review in each subgroup will be introduced in the order of date with brief summaries and comments on new developments and different scopes of prospects. Brief summaries of each categories and conclusive future perspectives are also given.     

Optimization of microwave‐assisted extraction for anthocyanins,polyphenols, and antioxidants from raspberry (Rubus Coreanus Miq.) using response surface methodology

Anthocyanins (Acys), polyphenols, and antioxidants were extracted from raspberry (Rubus Coreanus Miq.) using a highly efficient microwave‐assisted extraction technique. Different solvents, including methanol, ethanol, and acetone, were tested. The colors of the extracts varied from light yellow to purple red or dark red. SEM and other nutrient analyses verified that ethanol was the most favorable medium for the microwave‐assisted extraction of raspberry due to its high output and low toxicity. Effects of process parameters, including microwave power, irradiation time, and solvent concentration, were investigated through response surface methodology. Canonical analysis estimated that the highest total Acys content, total polyphenols content, and antioxidant activity of raspberry were 17.93 mg cyanidin‐3‐O‐glucoside equivalents per gram dry weight, 38.57 mg gallic acid equivalents per gram dry weight, and 81.24%, respectively. The polyphenol compositions of raspberry extract were identified by HPLC with diode array detection, and nine kinds of polyphenols were identified and quantified, revealing that chlorogenic acid, syringic acid, and rutin are the major polyphenols contained in raspberry fruits. Compared with other fruits and vegetables, raspberry contains higher Acy and polyphenol contents with stronger antioxidant activity, suggesting that raspberry fruits are a good source of natural food colorants and antioxidants.     

Preparation and characterization of octadecyl acrylate monoliths for capillary electrochromatography by photochemical,thermal, and chemical initiation†

Monolithic stationary phases based on octadecyl acrylate for CEC using different initiating systems (UV irradiation, thermal, and chemical initiation) in the presence of lauroyl peroxide as initiator were synthesized. For each initiation mode, the influence of the porogenic solvent composition on both the morphological and electrochromatographic properties of the resulting monoliths was investigated. Under optimal conditions, excellent efficiencies for the photochemically and chemically polymerized monoliths (minimum plate heights of 6.9–10.7 and 6.5–12.6 μm, respectively) were achieved. Thermally initiated columns gave lower efficiency values, permeabilities, and longer analysis times compared to these initiating systems. The produced monolithic stationary phases were evaluated in terms of reproducibility and gave RSD values below 9.2, 10.6, and 9.8% for UV, thermally, and chemically initiated columns, respectively.     

Total synthesis of (+)-valienamine and (−)-1-epi-valienamine via a highly diastereoselective allylic amination of cyclic polybenzyl ether using chlorosulfonyl isocyanate

The total synthesis of (+)-valienamine and (−)-1-epi-valienamine was concisely accomplished from readily available d-glucose via a highly diastereoselective amination of chiral benzylic ether using chlorosulfonyl isocyanate, intramolecular olefin metathesis, and diastereoselective reduction of cyclic enone using l-Selectride as the key steps.     

Synthesis of trisubstituted thiazoles by ligand-free palladium-catalyzed direct 5-arylation of 2,4-disubstituted thiazoles under conventional and microwave-assisted heating

Trisubstituted thiazoles were synthesized with excellent yields using ligand-free, palladium-catalyzed, direct 5-arylation of 2,4-disubstituted thiazole and conventional or microwave-assisted heating. The palladium-catalyzed reaction yields were significantly influenced by LiCl additive, solvent, and heating method. The reaction times were reduced dramatically by employing microwave radiation instead of conventional heating. The synthetic methods can be applied to diverse 2,4,5-trisubstituted thiazoles by varying the aryl bromide and disubstituted thiazole reactants.     

Determination of the elastic constants of nematic liquid crystals by means of the affine transformation model

In this paper the affine connection approach will be used to calculate the elastic constants of nematic liquid crystals. Following this approach, which was originally conceived to compute the nematic viscosity coefficients, an expression for the elastic constants, without adjustable free parameters, will be formulated in terms of a temperature dependent metric, whose non‐isotropic part is proportional to the tensorial order parameter of the nematic phase. The dependence of the elastic constants on the scalar order parameter, in the geometry of the nematic molecules, and in the anisotropic part of the molecular interaction, will be determined.     

Dimesogenic compounds with an electron-attracting terminal group

Non-symmetric dimesogens composed of a classical aromatic mesogenic unit linked to a cholesteryl moiety by a flexible spacer form several types of smectic periodicities: one is connected to the cholesteryl length and the other to the length of the associated dimesogens. In some peculiar cases, anomalies of periodicity resulting from the competition between these incommensurate lengths are observed through the occurrence of two-dimensional modulated phases or incommensurate low ordered smectic phases (S_ic). As part of our continuing effort to understand the influence on the smectic arrangement of the molecular parameters of such non-symmetric dimesogens, new homologues with a cholesteryl unit linked by a pentamethylene spacer to an aromatic mesogenic moiety bearing different electron attracting terminal groups have been prepared. For these compounds, only the periodicity resulting from the associated dimesogens is observed. Nevertheless, an incommensurate smectic phase can be induced by mixing one of these compounds with another appropriate dimesogen. Molecular mechanics calculations suggest that the origin of the different smectic structures is strongly connected to the repartition of electrostatic potential along the dimesogen.     

Silaffin Peptides as a Novel Signal Enhancer for Gravimetric Biosensors

Application of biomimetic silica formation to gravimetric biosensors has been conducted for the first time. As a model system, silaffin peptides fused with green fluorescent protein (GFP) were immobilized on a gold quartz crystal resonator for quartz crystal microbalances using a self-assembled monolayer. When a solution of silicic acid was supplied, silica particles were successfully deposited on the Au surface, resulting in a significant change in resonance frequency (i.e., signal enhancement) with the silaffin–GFP. However, frequency was not altered when bare GFP was used as a control. The novel peptide enhancer is advantageous because it can be readily and quantitatively conjugated with sensing proteins using recombinant DNA technology. As a proof of concept, this study shows that the silaffin domains can be employed as a novel and efficient biomolecular signal enhancer for gravimetric biosensors.