Brightness and decay time of Zn2SiO4:Mn phosphor particles with spherical shape and fine size

Green-light-emitting Zn₂SiO₄:Mn phosphor particles were synthesized by modified large-scale spray pyrolysis using a colloidal solution containing fumed silica particles. The particles had a fine size, filled morphology, spherical shape and non-aggregation characteristics even after post-treatment at 1150 °C. The luminescence characteristics of Zn₂SiO₄:Mn phosphor particles having spherical shape, such as brightness and decay time under VUV excitation light, were investigated as a function of Mn content. The luminescence intensity exhibits a maximum at 5 mol% Mn-doped powder. The decay time increases consistently with decreasing Mn content and more saturated color coordinates are obtained with the composition having 12 mol% Mn. As a consequence, the 10 mol% Mn-doped powder proved to provide a good combination of favorable luminance and acceptable decay time. The influence of post-treatment temperature on the decay time and photoluminescence characteristics of Zn₂SiO₄:Mn particles was also investigated. Particles post-treated at 1155 °C had the maximum photoluminescence intensity, which was identical to 113% that of the commercial product, and a comparable decay time of 5.8 ms. PACS 81.20.Rg; 78. 55.Hx; 78.40.Ha; 81.05.Hd; 81.40.Tv     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Electrochemical behavior of Li intercalation processes into a Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 cathode

Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ (X=0.17, 0.25, 0.33, 0.5) compounds are prepared by a simple combustion method. The Rietvelt analysis shows that these compounds could be classified as having the α-NaFeO₂ structure. The initial charge-discharge and irreversible capacity increases with the decrease of x in Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂. Indeed, Li[Ni_0.50Mn_0.50]O₂ compound shows relatively low initial discharge capacity of 200 mAh/g and large capacity loss during cycling, with Li[Ni_0.17Li_0.22Mn_0.61]O₂ and Li[Ni_0.25Li_0.17Mn₀.₅₈]O₂ compounds exhibit high initial discharge capacity over 245 mAh/g and stable cycle performance in the voltage range of 4.8 -2.0 V. On the other hand, XANES analysis shows that the oxidation state of Ni ion reversibly changes between Ni²⁺ and about Ni³⁺, while the oxidation state of Mn ion sustains Mn⁴⁺ during charge-discharge process. This result does not agree with the previously reported ‘electrochemistry model’ of Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂, in which Ni ion changes between Ni²⁺ and NI⁴⁺. Based on these results, we modified oxidation-state change of Mn and Ni ion during charge-discharge process.     

Hyers-Ulam-Rassias stability of homomorphisms in quasi-Banach algebras associated to the Pexiderized Cauchy functional equation

In this paper, we prove the Hyers-Ulam-Rassias stability of homomorphisms in quasi-Banach algebras associated to the Pexiderized Cauchy functional equation. This is applied to investigate homomorphisms between quasi-Banach algebras. The concept of Hyers-Ulam-Rassias stability originated from Th.M. Rassias' stability theorem that appeared in his paper [Th.M. Rassias, On the stability of the linear mapping in Banach spaces, Proc. Amer. Math. Soc. 72 (1978) 297-300].     

Proton relaxation times in human red bone marrow by volume selective magnetic resonance spectroscopy

In hematological diseases the composition of red bone marrow shows alterations. The relaxation timesT ₁ andT ₂ of water and lipids in human hemopoietic bone marrow of 14 normal volunteers and 10 patients with acute leukemia and bone marrow carcinosis are determined using a double spin echo spectroscopy sequencein vivo. The volumes of interest (VOI) of (13 mm)³ in the center of vertebral bodies are examined using different measurement parameters. ForT ₁ measurements an inversion-recovery method is used.T ₂ is evaluated from spectra with differentTE. T ₁ (water) is found in a range between 1000 and 1700 ms,T ₁ (lipids) in a range between 260 and 320 ms in healthy volunteers.T ₂ (water) is determined between 32 and 65 ms. In some cases phase distortions of the water signals occur in the spectra. Water flow within the VOI may be a possible reason.T ₂ (lipids) is evaluated between 73 and 91 ms. The patients with acute leukemia exhibit clearly reduced lipid signals in their spectra. Lipid relaxation times could not be determined in these cases.T ₂ (water) is prolonged in acute leukemia to 51–98 ms.T ₁ (water) was not significantly different from values of healthy volunteers in our measurements. Results are discussed in comparison to relaxometric data from imaging and STEAM spectroscopic methods of other authors.     

Emission and sputtering characteristics of Ne-Ar mixed gas glow discharge plasmas.

The emission characteristics of several Cu lines emitted from a Ne-Ar mixed gas glow discharge plasma were investigated. The addition of small amounts of Ar to a Ne plasma increases the sputtering rate of a Cu sample because Ar ions, which work as the impinging ions for cathode sputtering, are predominantly produced through Penning ionization collisions between Ne metastables and Ar atoms. Ar addition also elevates the number density of electrons in the plasma. These changes occurring in the Ne-Ar mixed gas plasma result in enhanced emission intensities of the Cu lines. The Cu II 270.10-nm and the Cu II 224.70-nm lines yield different intensity dependence on the Ar partial pressure added. This phenomenon is because these Cu II lines are excited principally through different charge transfer processes: collisions with Ne ions for the Cu II 270.10-nm line and collisions with Ar ions for the Cu II 224.70-nm line. The shape of sputtered craters in the Ne-Ar glow discharge plasma was measured. The depth resolution was improved when Ar was added to a Ne plasma because the crater bottoms were flatter with larger Ar partial pressures.     

Angular and NiFe thickness dependence of exchange bias in IrMn/NiFe/IrMn thin film

Exchange biased IrMn/NiFe/IrMn thin films were studied as a function of NiFe thickness. In plane angular dependence of a resonance field distribution which is measured by FMR was analyzed as a combined effect of an unidirectional anisotropy and an uniaxial anisotropy. The unidirectional anisotropic field and the uniaxial anisotropic field were linearly varied with NiFe thickness while the films with a thicker NiFe layer do not follow the linear variation. Resonance field and linewidth variations were also analysed with NiFe thickness.