Synthesis and Molecular Recognition of Molecularly Imprinted Polymer with Ibuprofen as Template

Ibuprofen and ketoprofen are chemically similar non‐steroidal anti‐inflammatory drugs widely used in the treatment of arthritis. Using a molecular imprinting technique, a simple and rapid method was developed for the simultaneous separation and determination of ibuprofen and ketoprofen. Molecular imprinting introduces artificial binding sites into a synthetic polymer matrix, allowing it to exhibit selective rebinding of template molecules. Imprinted polymers can be regarded as an HPLC stationary phase, important for pharmaceutical analysis. Most molecularly imprinted polymers (MIPs) are synthesized by free radical polymerization of functional monomers, resulting in an excess of crosslinking monomers. In this study, MIPs have been prepared with a ibuprofen template, which can form intramolecular hydrogen bonds. Methacrylic acid (MAA) and ethyleneglycol dimethacrylate (EGDMA) were used as the functional monomer and cross‐linker, respectively. Bulk polymerization was carried out at 4 °C under UV radiation. The resulting MIP was ground into 25?44 μm particles, which were slurry‐packed into analytical columns. Template molecules were removed by methanol‐acetic acid (9:1, v/v). We evaluated the template binding performance of the MIP using HPLC, with ultraviolet (UV) detection at 234 nm. Chromatographic resolution of ibuprofen and ketoprofen on the MIPs were appraised using buffer/acetonitrile (45/55, v/v) as the mobile phase. Results show that the MIPs prepared using ibuprofen as the template had a significant molecular imprinting effect. The method was successfully applied to the separation and analysis of ibuprofen and ketoprofen in pharmaceuticals.     

Whole-Cell Photoenzymatic Cascades to Synthesize Long-Chain Aliphatic Amines and Esters from Renewable Fatty Acids

Long-chain aliphatic amines such as (S,Z)-heptadec-9-en-7-amine and 9-aminoheptadecane were synthesized from ricinoleic acid and oleic acid, respectively, by whole-cell cascade reactions using the combination of an alcohol dehydrogenase (ADH) from Micrococcus luteus, an engineered amine transaminase from Vibrio fluvialis (Vf-ATA), and a photoactivated decarboxylase from Chlorella variabilis NC64A (Cv-FAP) in a one-pot process. In addition, long chain aliphatic esters such as 10-(heptanoyloxy)dec-8-ene and octylnonanoate were prepared from ricinoleic acid and oleic acid, respectively, by using the combination of the ADH, a Baeyer–Villiger monooxygenase variant from Pseudomonas putida KT2440, and the Cv-FAP. The target compounds were produced at rates of up to 37 U g⁻¹ dry cells with conversions up to 90 %. Therefore, this study contributes to the preparation of industrially relevant long-chain aliphatic chiral amines and esters from renewable fatty acid resources.     

Scaffold-based molecular design with a graph generative model

Searching for new molecules in areas like drug discovery often starts from the core structures of known molecules. Such a method has called for a strategy of designing derivative compounds retaining a particular scaffold as a substructure. On this account, our present work proposes a graph generative model that targets its use in scaffold-based molecular design. Our model accepts a molecular scaffold as input and extends it by sequentially adding atoms and bonds. The generated molecules are then guaranteed to contain the scaffold with certainty, and their properties can be controlled by conditioning the generation process on desired properties. The learned rule of extending molecules can well generalize to arbitrary kinds of scaffolds, including those unseen during learning. In the conditional generation of molecules, our model can simultaneously control multiple chemical properties despite the search space constrained by fixing the substructure. As a demonstration, we applied our model to designing inhibitors of the epidermal growth factor receptor and show that our model can employ a simple semi-supervised extension to broaden its applicability to situations where only a small amount of data is available.

We propose a scaffold-based graph generative model for designing novel drug candidates that include the desired scaffold as a substructure.     

Controlled growth of ZnO nanorod templates and TiO<Subscript>2</Subscript> nanotube arrays by using porous TiO<Subscript>2</Subscript> film as mask

Silver nanoparticles well dispersed in a spherical Poly(vinylpyrollidone)(PVP) matrix were simply prepared by spray pyrolysis of aqueous solutions of AgNO₃ and PVP without any reducing agent. Highly monodisperse silver particles were obtained above the initial mass ratio of PVP/AgNO₃ ∼ 1 and in a certain narrow temperature range. Below the critical mass ratio the silver particles grew to larger ones polydispersely. As the ratio increased above it, they became smaller maintaining their monodispersity. The use of PVP considerably decreased the reduction temperature of the silver nitrate from 450 °C to 250 °C under the same pyrolysis conditions, due to its reducing nature. As the pyrolysis temperature increased above the decomposition temperature of PVP, the silver particles in the matrix grew to merge to a single particle while their crystallite size did not increase as much. The spherical assemblies of the silver nanoparticles were hardly disengaged even after severe washing off the matrix materials. The mechanism of the nanoparticle growth was also discussed.     

Modification of both the electrophilic center and substituents on the nonleaving group in pyridinolysis of O-4-nitrophenyl benzoate and thionobenzoates

A kinetic study is reported for reactions of 4-nitrophenyl benzoate (1c) and O-4-nitrophenyl X-substituted thionobenzoates (2a-e) with a series of pyridines in 80 mol % H2O/20 mol % dimethyl sulfoxide (DMSO) at 25.0 +/- 0.1 degrees C. O-4-Nitrophenyl thionobenzoate (2c) is more reactive than its oxygen analogue 1c toward all the pyridines studied. The Br?nsted-type plot is linear with beta(nuc)=1.06 for reactions of 1c but curved for the corresponding reactions of 2c with beta(nu)c decreasing from 1.38 to 0.38 as the pyridine basicity increases, indicating that the reaction mechanism is also influenced on changing the electrophilic center from C=O to C=S. The curvature center of the curved Br?nsted-type plots (defined as pK(a)(o)) occurs at pKa = 9.3 regardless of the electronic nature of the substituent X in the nonleaving group. The Hammett plot for reactions of 2a-e with 4-aminopyridine is nonlinear, i.e., the substrates having an electron-donating substituent exhibit negative deviations from the Hammett plot. However, the Yukawa-Tsuno plot for the same reactions exhibits good linear correlation, indicating that the negative deviations shown by these substrates arise from stabilization of the ground state through resonance interaction between the electron-donating substituent X and the C=S bond.     

Energy level and band alignment for GaAs-alkylthiol monolayer-Hg junctions from electrical transport and photoemission experiments

A series of p- and n-GaAs-S-C(n)H(2n+1) || Hg junctions are prepared, and the electronic transport through them is measured. From current-voltage measurements, we find that, for n-GaAs, transport occurs by both thermionic emission and tunneling, with the former dominating at low forward bias and the latter dominating at higher forward bias. For p-GaAs, tunneling dominates at all bias voltages. By combining the analysis of the transport data with results from direct and inverse photoemission spectroscopy, we deduce an energy band diagram of the system, including the tunnel barrier and, with this barrier and within the Simmons tunneling model, extract an effective mass value of 1.5-1.6m(e) for the electronic carriers that cross the junctions. We find that transport is well-described by lowest unoccupied and highest occupied states at 1.3-1.4 eV above and 2.0-2.2 eV below the Fermi level. At the same time, the photoemission data indicate that there are continua of states from the conduction band minimum and the valence band maximum, the density of which varies with energy. On the basis of our results, it appears likely that, for both types of junctions, electrons are the main carrier type, although holes may contribute significantly to the transport in the p-GaAs system.     

Luminescent osmium(II) complexes with functionalized 2-phenylpyridine chelating ligands: preparation, structural analyses, and photophysical properties

Cyclometalated osmium complexes with the formulas [Os(ppy) 2(CO) 2] ( 1a, b), [Os(dfppy) 2(CO) 2] ( 2a, b), and [Os(btfppy) 2(CO) 2] ( 3a, b) have been synthesized, for which the chelating chromophores ppyH, dfppyH, and btfppyH denote 2-phenylpyridine, 2-(2,4-difluorophenyl)pyridine, and 2-(2,4-bis(trifluoromethyl)phenyl)pyridine, respectively. The isomers 1a- 3a, possessing an intrinsic C 2 rotational axis as determined by single-crystal X-ray diffraction analysis, underwent slow isomerization in solution at elevated temperature, giving the respective thermodynamic products 1b- 3b, which showed a distinctive coordination arrangement produced by a 180 degrees rotation of one cyclometalated ligand around the Os(II) metal center. In contrast to the case for 1a, b and 2a, which are inert to substitution, complexes 2b and 3b (or 3a) readily react with PPh 2Me to afford the products [Os(dfppy) 2(CO)(PPh 2Me)] ( 4) and [Os(btfppy) 2)(PPh 2Me)] ( 6), in which the incoming PPh 2Me replaced the CO located trans to the carbon atom of one cyclometalated ligand. UV-vis and emission spectra were measured, revealing the lowest excited state for all complexes as a nominally ligand-centered (3)pipi* state mixed with certain MLCT character. Introduction of the electron-withdrawing substituents on the cyclometalated chelates or replacement of one CO ligand with phosphine at the metal center increased the MLCT contribution in the first excited state, giving a broad and featureless emission with greatly enhanced quantum yields.     

Probing the structure, stability and hydrogen storage properties of calcium dodecahydro-closo-dodecaborate

Calcium borohydride can reversibly store up to 9.6 wt% hydrogen; however, the material displays poor cyclability, generally associated with the formation of stable intermediate species. In an effort to understand the role of such intermediates on the hydrogen storage properties of Ca(BH₄)₂, calcium dodecahydro-closo-dodecaborate was isolated and characterized by diffraction and spectroscopic techniques. The crystal structure of CaB₁₂H₁₂ was determined from powder XRD data and confirmed by DFT and neutron vibrational spectroscopy studies. Attempts to dehydrogenate/hydrogenate mixtures of CaB₁₂H₁₂ and CaH₂ were made under conditions known to favor partial reversibility in calcium borohydride. However, up to 670 K no notable formation of Ca(BH₄)₂ (during hydrogenation) or CaB₆ (during dehydrogenation) occurred. It was demonstrated that the stability of CaB₁₂H₁₂ can be significantly altered using CaH₂ as a destabilizing agent to favor the hydrogen release.