The preparation of nanophase tungsten carbide powder with zeolite-X catalysts

The reduction–carburization of tungsten trioxide (WO₃) under carbon monoxide flow was studied in the temperature range of 300–750 °C. The reduction–carburization of WO₃ was improved by mechanically mixing with zeolite-HX, -NaX and -KX. The interaction between cation in zeolite-X and oxygen in WO₃ affected the improvement of the reduction–carburization of WO₃ to WC. Moreover, the improved reduction–carburization of WO₃ could lead to the decrease of reaction temperature. Because the particle size of WC is in contact with a reaction temperature, the nanophase WC can be prepared at low temperature. In particular, the particle size of WC was controlled by reaction temperature. The particle sizes of produced WC at 550, 650 and 700 °C were 25, 50 and 100 nm respectively.     

Advantages of Adaptive Speckle Filtering Prior to Application of Iterative Deconvolution Methods for Optical Coherent Tomography Imaging

The axial resolution of optical coherence tomography (OCT) is closely related to the light source spectrum width. Unfortunately, most basic sources providing the required power for decent OCT image have narrow spectra, which generate a resolution loss. Assuming the OCT system is linear shift-invariant, we can consider the system output as the convolution of the theoretical signal with a system impulse response due to this spectrum narrowness. It becomes then possible to enhance this resolution through iterative deconvolution methods (IDM). However those methods have a significant drawback, as they usually significantly enhance speckle, which is another consequence of the source spectrum narrowness. To compensate this, we rely on preliminary speckle filtering, and especially the adaptative ones, which allow tackling the speckle without blurring the image. We first studied enhancement proposed by most popular IDMs on OCT images, and then the effect of preliminary adaptive speckle filtering (ASF) by different common adaptive methods. Then, among those methods, we combined Frost filter and Richardson-Lucy deconvolution in the appropriated way; this way we both enhanced resolution by 2 and reduced speckle (raising CNR from 0.7 to 1.3)     

The enhanced expression of IL-17-secreting T cells during the early progression of atherosclerosis in ApoE-deficient mice fed on a western-type diet

Atherosclerosis is a chronic progressive inflammatory disorder and the leading cause of cardiovascular mortality. Here we assessed the dynamic changes of T-cell-derived cytokines, such as inteferon (IFN)-γ, interleukin (IL)-17 and IL-4, during the progression of atherosclerosis in apolipoprotein E-null (ApoE^−/−) mice, to understand the role of immune responses in different stages of atherosclerosis. Male ApoE^−/− mice were fed a high-fat, western-type diet (WD: 21% lipid, 1.5% cholesterol) after 5 weeks of age and were compared with C57BL/6 wild-type control mice fed a standard chow diet. Atherosclerotic lesions appeared in the aortic sinus of ApoE^−/− mice 4 weeks after WD and the lesions progressed and occupied >50% of the total sinus area 16 weeks after WD. Aortic IL-17 mRNA and protein expression started to increase in ApoE^−/− mice after 4 weeks on the WD and peaked at around 8–12 weeks on the WD. In terms of systemic expression of T-cell-derived cytokines, IL-17 production from splenocytes after anti-CD3/CD28 stimuli increased from 4 weeks on the WD, peaked at 12 weeks and returned to control levels at 16 weeks. The production of IFN-γ and IL-4 (Th1 and Th2 cytokines, respectively) from splenocytes was delayed compared with IL-17. Taken together, the present data indicate that Th17 cell response may be involved at an early stage in the development of atherosclerosis.     

Onset of Surface Damage in Modular Orthopedic Implants: Influence of Normal Contact Loading and Stress-assisted Dissolution

Surface damage at interfaces of modular implants results from repeated fretting contacts between metallic surfaces in a corrosive environment. As a first step in understanding this complex process, multi-asperity contact experiments were conducted to characterize roughness evolution due to action of contact loads and exposure to a reactive environment. Cobalt–chromium specimens with surface roughness similar to modular implant were first subjected to only contact loading and subsequently, to alternating contact loads and exposure to reactive environment. During repeated normal contact loading, amplitude of surface roughness reached a steady value after decreasing during the first few cycles. However during the second phase surface roughness amplitude continuously evolved—decreasing during contact loading and increasing on exposure to corrosive environment. The increase in roughness amplitude during surface reaction depended on the magnitude of applied contact loads. A damage mechanism that incorporates contact-induced residual stress development and stress-assisted dissolution is proposed to elucidate the measured surface roughness evolution.     

Oxidation of a guanine derivative coordinated to a Pt(IV) complex initiated by intermolecular nucleophilic attacks

In this study we report that fac-[Pt(IV)(dach)(9-EtG)Cl(3)](+) (dach = d,l-1,2-diaminocyclohexane, 9-EtG = 9-ethylguanine) in high pH (pH 12) or phosphate solution (pH 7.4) produces 8-oxo-9-EtG and Pt(II) species. The reaction in H(2)(18)O revealed that the oxygen atom in hydroxide or phosphate ends up at the C8 position of 8-oxo-G. The kinetics of the redox reaction was first order with respect to both Pt(IV)-G and free nucleophiles (OH(-) and phosphate). The oxidation of G initiated by hydroxide was approximately 30～50 times faster than by phosphate in 100 mM NaCl solutions. The large entropy of activation of OH(-1) (ΔS(?) = 26.6 ± 4.3 J mol(-1) K(-1)) due to the smaller size of OH(-) is interpreted to be responsible for the faster kinetics compared to phosphate (ΔS(?) = -195.5 ± 11.1 J mol(-1) K(-1)). The enthalpy of activation for phosphate reaction is more favorable relative to the OH(-) reaction (ΔH(?) = 35.4 ± 3.5 kJ mol(-1) for phosphate vs. 96.6 ± 11.4 kJ mol(-1) for OH(-1)). The kinetic isotope effect of H8 was determined to be 7.2 ± 0.2. The rate law, kinetic isotope effect, and isotopic labeling are consistent with a mechanism involving proton ionization at the C8 position as the rate determining step followed by two-electron transfer from G to Pt(IV).     

Vicinal C-functionalization of alkenes. Pd/light-induced multicomponent coupling reactions leading to functionalized esters and lactones

Under photoirradiation conditions using a xenon light, and in the presence of PdCl(2)(PPh(3))(2) as a catalyst, four-component coupling reactions comprising of α-substituted iodoalkanes, alkenes, carbon monoxide, and alcohols proceeded smoothly to give functionalized esters in good yields. When alkenyl alcohols were used as acceptor alkenes, three-component coupling reactions accompanied by intramolecular esterification proceeded to give lactones in good yields. The present reaction system represents the vicinal C-functionalization of alkenes.     

Oxazaborolidinium ion-catalyzed cyclopropanation of α-substituted acroleins: enantioselective synthesis of cyclopropanes bearing two chiral quaternary centers

A catalytic synthetic route to highly functionalized chiral cyclopropane derivatives was developed by Michael-initiated cyclopropanation of α-substituted acroleins with aryl- and alkyl diazoacetates. In the presence of chiral (S)-oxazaborolidinium cation 1b as a catalyst, the reaction proceeded in high yield (up to 93%) with high to excellent diastereoselectivity (up to 98% de) and enantioselectivity (up to 95% ee).     

End-to-end azide-bridged manganese(III) chain compounds: field-induced magnetic phase transitions and variation of T(C) to 38 K depending on the side groups of the Schiff bases

Three one-dimensional coordination polymers [Mn(L)(N(3))](n) [L = L1 (1), L2 (2), L3 (3); L1H(2) = N,N'-bis(5-chlorosalicylideneiminato)-1,3-diaminopentane, L2H(2) = N,N'-bis(5-bromosalicylideneiminato)-1,3-diaminopentane, L3H(2) = N,N'-bis(5-bromosalicylideneiminato)-1,3-diamino-2-dimethylpropane] bridged by end-to-end azides were prepared. The crystal systems differ according to the Schiff bases used. Each Mn atom adopts a typical Jahn-Teller distortion. The helicity of the chains occurs in a racemic manner only for 2. No noncovalent forces are relevant in 2, while π-π contacts are visible in 1 and 3. Magnetic measurements show the presence of apparent spin canting. Complexes 1 and 3 exhibit a field-induced metamagnetic transition from an antiferromagnetic state to a weak ferromagnetic phase, whereas 2 embraces a field-induced two-step magnetic phase transition. The critical temperature is observed at 38 K for 2, which is relatively higher than those for 1 (11 K) and 3 (10 K). The pronounced long-range order may contribute from intrachain exchange couplings and through-space dipolar interactions between adjacent chains.