Picomolar Detection of Hydrogen Peroxide at Glassy Carbon Electrode Modified with NAD+ and Single Walled Carbon Nanotubes

Potential cycling was used for oxidation of NAD⁺ and producing an electroactive redox couple which strongly adsorbed on the electrode surface modified with single walled carbon nanotubes (SWCNTs). Modified electrode shows a pair of well defined and nearly reversible redox peaks at pH range 1–13 and the response showed a surface‐controlled electrode process. The surface coverage and heterogeneous electron transfer rate constant (k_s) of adsorbed redox couple onto CNTs films were about 6.32×10^?10 mol cm^?2 and 2.0 (±0.20) s^?1, respectively, indicating the high loading ability of CNTs toward the oxidation product of NAD⁺ (2,8‐dihydroxy adenine dinucleotide) and great facilitation of the electron transfer between redox couple and CNTs immobilized onto electrode surface. The modified electrode exhibited excellent electrocatalytic activity for H₂O₂ reduction at reduced overpotential. The catalytic rate constant for H₂O₂ reduction was found to be 2.22(±0.20)×10⁴ M^?1 s^?1. The catalytic reduction current allows the amperometric detection of H₂O₂ at an applied potential of ?0.25 V vs. Ag/AgCl with a detection limit of 10 pM and linear response up to 100 nM and resulting analytical sensitivity 747.6 nA/pM. The remarkably low detection limit (10 pM) is the lowest value ever reported for direct H₂O₂ determination on the electrodes at pH 7. The modified electrode can be used for monitoring H₂O₂ without the need for an enzyme or enzyme mimic. The proposed method for rapid amperometric detection of H₂O₂ is low cost and high throughput. Furthermore, the sensor can be used to any detection scheme that uses enzymatically generated H₂O₂ as a reactive product in biological systems.     

On the nonlinear Hammerstein integral equations in Banach spaces and application to the boundary value problem of fractional order

In this paper, we study the existence of solutions of the operator equations p+λGfx=x in the Banach space C[I,E]. It is assumed the vector-valued function f is nonlinear Pettis-integrable. Some additional assumptions imposed on f are expressed in terms of a weak measure of noncompactness. To encompass the full scope of the paper, we investigate the existence of pseudo-solutions for the nonlinear boundary value problem of fractional type

under the Pettis integrability assumption imposed on f.     

Adsorption of CH4 and CO2 on Zr-metal organic frameworks

Zirconium-metal organic frameworks (Zr-MOFs) were synthesized with or without ammonium hydroxide as an additive in the synthesis process. It was found that addition of ammonium hydroxide would change the textural structure of Zr-MOF. The BET surface area, pore volume, and crystal size of Zr-MOF were reduced after addition of ammonium hydroxide. However, the crystalline structure and thermal stability were maintained and no functional groups were formed. Adsorption tests showed that Zr-MOF presented much higher CO(2) adsorption than CH(4). Zr-MOF exhibited CO(2) and CH(4) adsorption of 8.1 and 3.6 mmol/g, respectively, at 273 K, 988 kPa. The addition of ammonium hydroxide resulted in the Zr-MOF with a slight lower adsorption of CO(2) and CH(4), however, the selectivity of CO(2)/CH(4) is significantly enhanced.     

The Role of PANI/Nafion on the Performance of ORR in Gas Diffusion Electrodes of PEM Fuel Cell

In this work, gas diffusion electrodes were fabricated from Nafion and polyaniline (PANI) nanofibers. The goal of this work was to find the optimal combination of Nafion and polyaniline in gas diffusion electrodes. The electrodes were evaluated for oxygen reduction reaction effectiveness, and their electrochemical properties were investigated by using electrochemical techniques, and PEM single cell. The results revealed that electrodes containing both Nafion and polyaniline worked more efficiently than electrodes containing either Nafion or polyaniline only. The optimum combination is noted as 0.6 mg/cm² PANI and 0.4 mg/cm² Nafion.     

Simple and Clean Procedure for Three‐Component Syntheses of Spiro{pyrido[2,1‐b]benzothiazole‐3,3′‐indolines} and Spiro{thiazolo[3,2‐a]pyridine‐7,3′‐indolines} in Aqueous Medium

A simple and efficient one‐pot three component synthesis of spiro{pyrido[2,1‐b]benzothiazole‐3,3′‐indoline} and/or spiro{thiazolo[3,2‐a]pyridine‐7,3′‐indoline} derivatives were carried out by the reaction of 2‐mercaptoaniline and/or mercaptoacetic acid, malononitrile, and a series of 2‐oxoindoline‐3‐ylidines in aqueous medium. This method is of great value because of its environmentally benign character, high yield processing, and easy handling.     

Development of a hypoxia-selective near-infrared fluorescent probe for non-invasive tumor imaging

A near-infrared fluorochrome, GPU-311, was designed, synthesized and evaluated for its application in non-invasive imaging of tumor hypoxia. Efficient synthesis was achieved by nucleophilic substitution and click chemistry ring using the bifunctional tetraethylene glycol linker 2 containing thiol and azide groups for the conjugation of the propargylated nitroimidazole 1 and the heptamethine cyanine dye 3 bearing a 2-chloro-1-cyclohexenyl ring. GPU-311 exhibited long excitation and emission wavelength (Ex/Em=785/802?nm) and a decent quantum yield (0.05). The water solubility and hydrophilicity of GPU-311 increased. After in vitro treatment of SUIT-2/HRE-Luc pancreatic cancer cells with GPU-311, a higher level of fluorescence was observed selectively in hypoxia than in normoxia. However, in vivo fluorescence imaging of a mouse xenograft model after GPU-311 administration revealed inadequate accumulation of GPU-311 in tumors due to its rapid elimination through the liver.     

Spectral characteristics and fluorescence quenching of N,N′-bis(4-pyridyl)-3,4:9,10-perylenebis(dicarboximide) (BPPD)

The photophysical properties such as electronic absorption, molar absorptivity, emission spectra, fluorescence quantum yield and fluorescence lifetime of N,N′-bis(4-pyridyl)-3,4:9,10-perylene bis(dicarboximide) (BPPD) have been measured in different solvents. Both electronic absorption and fluorescence spectra are not sensitive to medium polarity, while the fluorescence quantum yield (?_f) is solvent dependent. The ground state geometry has been computed by using density functional theory (DFT), the transition from HOMO to LUMO from perylene core with maximum absorption at 512 nm and HOMO–LUMO energy difference equal 2.53 eV. BPPD dye undergoes molecular aggregation to dimmer or higher aggregates in dimethyl sulfoxide (DMSO). Crystalline solids of BPPD gives excimer-like emission at 676 nm. The fluorescence quenching of BPPD is also studied using hydrated ferric oxide nanoparticle (FeOOH), and the Stern–Volmer rate constants (K_sv) were calculated as 8×10⁶ and 9.2×10⁶ M^?1 in ethanol and ethylene glycol, respectively.     

Ultrasonic characterization of aqueous solutions with varying sugar and ethanol content using multivariate regression methods

This paper presents a multivariate regression method for simultaneous detection of sugar (sucrose as a sugar equivalent) and ethanol concentrations in aqueous solutions via temperature‐dependent ultrasonic velocity. Thus, several samples of different combined concentration values were exposed to a temperature spectrum ranging from 2 to 30°C to investigate the temperature dependence of ultrasonic velocity. Model calibration was performed in order to predict the concentrations of interest. With results of proceeded experiments, the equations for calculation of unknown concentrations were carried out using polynomial regression revealing two equations with functional dependence of concentrations on each other. Further, side effects or systematic errors are still included in this model. To avoid such problems as well as to increase the accuracy with respect to the absolute errors in determining unknown probes, multivariate regression methods such as partial least squares (PLS) were tested and compared to the results obtained by polynomial regression. The accuracy achieved with chemometric models on average was three times higher. In direct comparison, the values of the error for the prediction of sucrose concentration were on average around 0.4 g/100 g in the regression model with polynomial background (RMPA) and around 0.12 g/100 g in the PLS model, and for ethanol concentration 0.13 and 0.04 g/100 g, respectively. Furthermore, calculations of the concentrations are possible without knowing the concentrations of the other solute. Copyright © 2011 John Wiley & Sons, Ltd.     

Studies with polyfunctionally substituted heteroaromatics: A facile route for the synthesis of polyfunctionally substituted N-aminopyridines, 1,2,4-triazolo[1,5-a]pyridines and isoquinolines

The reactions of formaldehyde and acetaldehyde with active methylene compounds, followed by reaction with cyanoacetic acid hydrazide 2, afforded N-aminopyridine-2-one derivatives 5a-f. In contrast, the reactions of cyanoacetic acid hydrazide 2 with aliphatic aldehydes and cyanothioacetamide afforded pyridinethione derivatives 11a-b. Also, the reactions of active methylene compounds with formaldehyde and cyanoacetamide afforded pyridin(1H)-2-one derivatives 12a-c. The reactions of 5b with aldehydes and ketones afforded compounds 13a, b, 14, and 15, respectively. The reactions of 5b with arylidinemalononitriles 16a,b afforded isoquinoline derivatives 19a,b. Compound 19b by hydrolysis gave the final product 20. Compound 20 could also be formed by hydrolysis of 5b to give 21, followed by the reaction with 16b. © 1997 John Wiley & Sons, Inc.