One-Pot Convenient and High Yielding Synthesis of Dithiocarbamates

Summary. A convenient and high yielding method for the synthesis of diverse dithiocarbamates having various substituents including alkyl, aryl, heteroaryl, and alkylaryl at the thiol chain or at the amine chain or at both thiol and amine chains were developed by the one-pot reaction of mercaptans, amines, and bis(benzotriazolyl)methanethione in presence of amidine base under mild reaction conditions.     

配体形状对多吡啶铜(Ⅱ)配合物与DNA作用的影响

合成了一系列含有平面配体的Cu(Ⅱ)多吡啶配合物[Cu(IP)₂]²⁺、[Cu(PIP)₂]²⁺、[Cu(DPPZ)₂]²⁺和[Cu(HPIP)₂]²⁺，用吸收光谱、CD光谱和粘度等方法研究了这些配合物与小牛胸腺DNA的作用。结果表明配体上的取代基及配体的平面性对这些四面体配合物与DNA的结合强弱产生一定的影响。[Cu(DPPZ)₂]²⁺与DNA的结合较强，而[Cu(HPIP)₂]²⁺与DNA的结合较弱。CD光谱显示配合物[Cu(DPPZ)₂]²⁺、[Cu(PIP)₂]²⁺和[Cu(HPIP)₂]²⁺的加入会导致DNA的CD光谱减弱。而[Cu(IP)₂]²⁺的加入则会使DNA的CD光谱增强。同时，[Cu(IP)₂]²⁺与DNA结合后，还会引起一定程度的DNA构型转换，即DNA从B型转换成Z型。     

反应条件对Mo2C/Al2O3催化的POM制合成气的影响

考察了反应温度、气体空速和进料中CH4：O2比值对Mo2C／Al2O3催化的POM反应制合成气的影响．结果发现较高的温度具有较高的甲烷转化率、CO和H2的选择性；而在较低的温度下，对CO的选择性比对H2的影响更大．反应气体的空速较小时对于甲烷的转化率、CO和H2的选择性是有利的；而在较高的气体空速下，氢气的选择性则更低．进料中CH4：O2比值稍高于2：1时有利于获得高的甲烷转化率、CO和H2的选择性．并且还可以增加催化剂的稳定性．当CH4：O2比值低于2：1时．甲烷转化率、CO和H2选择性随反应的进行急剧下降．而当此比值调整到高于2：1时．转化率和选择件都可以得到恢复。     

卤代化合物的光化学反应研究进展

介绍近年来卤代化合物在光照射下的偶联反应、醇解反应、消去反应、开环反 应，尤其是卤代杂环化合物的光化学反应，得到了许多用热反应或催化反应无法替 代的具有生物(理)活性的中间体．     

Crystal Structure of (6S,9S,13R,14S)-7,8-Didehydro-3,7-dimethoxy-17-methylmorphinan-4,6-diol

1 INTRODUCTION (9S,13R,14S)-7,8-Didehydro-3,7-dimethoxy-4-hydroxy-17-methylmorphinan-6-one I is an impor- tant natural product that was used to ease pain, decrease blood pressure and diminish inflammation. In order to study the stereochemistry of the reduction of I with potassium boronhydride, the crystal structure of the title compound II was determined by X-ray diffraction method. 2 EXPERIMENTAL 2. 1 Instrument The melting point was measured on a Yanagimoto MP-500 apparatus…     

A numerical method using the Prfer transformation for the calculation of eigenpairs of two-parameter Sturm-Liouville problems

A shooting method for coupled Prfer equations is discussedfor numerical solution of two-parameter Sturm-Liouville problems. Research supported in part by grants from the NSERC of Canada.     

Synthesis and Photochromic Properties of Azido Analogues ofSpiropyran and Spirooxazine as Nucleic Acid Labeling Reagent

A series of photo active azido analogues have been synthesized and their photochromic properties have also been investigated by UV-Vis spectrum. It will be used for the rapid and reliable preparation of large amounts of stable, non-radioactive labeled DNA and RNA hybridization probes. And it is supposed to be easily detected for its photochromic properties.     

Ni／γ—Al2O3,Ni／MgO,Ni／SiO2催化剂上甲烷与二氧化碳重整反应的研究

采用ＸＲＤ，ＵＶ－ＤＲＳ，ＸＰＳ，ＴＰＲ，Ｈ２－Ｏ２滴定和吡啶吸附－红外光谱等技术，研究了负载于具有不同酸碱性的γ－Ａｌ２Ｏ３，ＳｉＯ２，Ｍｇｏ载体上的镍催化剂表面物理化学性质，及其对甲烷与二氧化碳重整制取合成气反应催化活性的影响。结果表明，在上述负载型镍催化剂上，影响重整反应活性和积炭量的主要原因不是催化剂表面酸碱性，而是金属镍在催化剂表面的分散度。     

Preparation and Properties of Aramid-Silica Hybrids with Inter-Phase Bonding Through (3-glycidoxypropyl)-trimethoxysilane

Nano-composites from aramid-silica system have been prepared via sol-gel process. Poly (phenyleneterephthalamide) copolymer chains were prepared by reacting a mixture of p- and m-phenylenediamines with terephthaloyl chloride in dimethylacetamide used as solvent. The sol-gel process in the polymer matrix was carried out through hydrolysis and condensation of a mixture of tetraethoxysilane and (3-glycidoxypropyl) trimethoxysilane. The latter was used to develop linkage, on one hand with silica network structure using alkoxy groups and on the other hand with aramid chains at its secondary amine groups through glycidal groups of silane. Mutual interaction between the two disparate phases aramid and silica network was thus created. Thin films of the composites containing different proportions of silica ranging from 5.0 to 25.0-wt% were cast by the solvent elution technique. The α-relaxation temperature associated with the glass transition was measured by the dynamic mechanical thermal analysis. The results showed an increase in the glass transition temperature from 328°C for the pure aramid to 352°C for the hybrid materials containing 25-wt% silica, an indicative of the increased interfacial interaction between the two phases. Films having relatively low silica content were flexible and transparent, but those with high silica content were opaque and brittle. These films were tested for their tensile strength, modulus and toughness. The mechanical strength of the composites as compared to the pure aramid increased initially but with further addition of silica the strength decreased. The initial increase can be explained due to increased interfacial interaction between the two phases, however agglomeration of silica particles was responsible for decreasing strength at higher silica contents.     

微波辐射下无催化剂一锅法合成N-甲基十氢吖啶-1,8-二酮化合物

为了研究从简单易得的原料在无催化剂的条件下一锅法合成N-甲基十氢吖啶-1,8-二酮化合物，我们以各类醛（脂肪醛、芳香醛、二醛）、达咪酮或1,3-环己二酮和甲胺为原料，以乙二醇或水为溶剂，经微波辐射，一步反应得到了一系列N-甲基十氢吖啶-1,8-二酮化合物。反应时间从传统热反应的4-5小时缩短至2-10分钟，产率较高（56-95%），并且不需要使用催化剂。该反应后处理方便，只需要简单洗涤，环境友好，为合成此类化合物提供了一种简便、有效的合成方法。该方法不仅适用于一元脂肪醛、芳香醛，还适用于芳香二醛，因此可以合成含有一个或两个十氢吖啶结构单元的杂环化合物。