Determination of the hydroxyl radical by its adduct formation with phenol and liquid chromatography/electrochemical detection

An HPLC-ECD method is described for the indirect determination of the hydroxyl (OH) radical. Fenton's reaction is used to produce OH, which simultaneously attacks phenols (phenol or pyrocatechol) to form the adducts, pyrocatechol or pyrogallic acid. Thus, [OH] quantification is based on the separation and detection of pyrogallic acid and/or pyrocatechol by an isocratic HPLC-ECD method. The quantification of OH is also performed alternatively by a chronoamperometric detection in an electrochemical cell, where simultaneously formed Fe^III (Fenton's reaction) combines [Fe^II(CN)₆]⁴⁻ to produce the Prussian blue (PB) molecules (Fe₄^III[Fe^II(CN)₆]₃). Newly formed PB molecules are then immediately converted to colorless Everitts salt (K₄Fe₄^II[Fe^II(CN)₆]₃) with the reduction of the high-spin Fe^III to Fe^II at the surface of a glassy carbon electrode at +0.150 V (versus Ag/AgCl). The calculated concentration of OH during incubation (0.626 ppm) can be detected with negative errors by the HPLC-ECD (0.595 and 0.615 ppm with the errors −5.2 and −1.8%, respectively) and by the chronoamperometric method (0.552 and 0.607 ppm with the errors −11.8 and −3.0%, respectively). For the comparison of the two sets of data, HPLC-ECD method is much more promising.     

Isocyanate formation in the catalytic reaction of CO + NO on Pd(111): an in situ infrared spectroscopic study at elevated pressures

The catalytic CO + NO reaction to form CO2, N2, and N2O has been studied on a Pd(111) surface at pressures up to 240 mbar using in situ polarization modulation infrared reflection absorption spectroscopy (PM-IRAS). At 240 mbar, for a pressure ratio of PCO:PNO = 3:2 and under reaction conditions, besides adsorbed CO, the formation of isocyanate (-NCO) was observed. Once produced at 500-625 K, the isocyanate species was stable within the entire temperature range studied (300-625 K). On the other hand, its formation required a total CO + NO pressure of at least 0.6 mbar, illustrating the importance of in situ infrared experiments under high-pressure conditions. The significance of the isocyanate formation for the CO + NO reaction on Pd(111) is discussed.     

Improved diode properties in zinc telluride thin film-silicon nanowire heterojunctions

In this study, structural and optoelectronic properties and photodedection characteristics of diodes constructed from p-zinc telluride (ZnTe) thin film/n-silicon (Si) nanowire heterojunctions are reported. Dense arrays of vertically aligned Si nanowires were successfully synthesized on (1 1 0)-oriented n-type single crystalline Si wafer using simple and inexpensive metal-assisted etching (MAE) process. Following the nanowire synthesis, p-type ZnTe thin films were deposited onto vertically oriented Si nanowires via radio frequency magnetron sputtering to form three-dimensional heterojunctions. A comparative study of the structural results obtained from X-ray diffraction and Raman spectroscopy measurements showed the improved crystallinity of the ZnTe thin films deposited onto the Si nanowire arrays. The fabricated nanowire-based heterojunction devices exhibited remarkable diode characteristics and enhanced optoelectronic properties and photosensitivity in comparison to the planar reference. The electrical measurements revealed that the diodes with nanowires had a well-defined rectifying behaviour with a rectification ratio of 10⁴ at ±2 V and a relatively small ideality factor of n = 1.8 with lower reverse leakage current and series resistance at room temperature in dark condition. Moreover, an open-circuit voltage of 100 mV was also observed under illumination. Based on spectral photoresponsivity measurements, the nanowire-based device exhibited a distinct responsivity and high detectivity in visible and near-infrared (NIR) wavelength regions. The device characteristics observed here offer that the fabricated ZnTe thin film/Si nanowire-based p–n heterojunction structures will find important applications in future and will be a promising candidate for high-performance and low-cost optoelectronic device applications, NIR photodedectors in particular.     

Polarizability of DNA Block Copolymer Nanoparticles Observed by Electrostatic Force Microscopy

In this study, DNA block copolymer (DBC) micelles with a polystyrene (PS) core and a single‐stranded (ss) DNA shell were doped with ferrocene (Fc) molecules. Tapping mode atomic force microscopy (AFM) was used to study the morphology of the doped and undoped block copolymer aggregates. We show that introducing Fc molecules into the hydrophobic core does not affect the structural properties such as shape or size. In contrast, doping with Fc significantly changes the micelles' electrical properties, namely their polarizability. Electrostatic force microscopy (EFM) measurements reveal that the undoped micelles show no significant polarization signal, while the Fc‐doped aggregates exhibit strongly enhanced polarizability. Furthermore, the nucleic acid moieties were utilized in combination with complementary ssDNA strands to assemble single particles into linear arrays of DBC nanoobjects. The ability to tune the electrostatic properties of the polymer core and the presence of nucleic acids might open the way for using these bioorganic nanoparticles as building blocks for nanoelectronic or biosensing devices.

     

The odd log-logistic Topp–Leone G family of distributions: heteroscedastic regression models and applications

We introduce a new class of distributions and provide a comprehensive treatment of its mathematical properties. The maximum likelihood method is discussed to estimate the parameters of the new model by means of Monte-Carlo simulation study. The heteroscedastic regression models with long-term survival are introduced to model data sets with the non homogeneity of the error variances in the presence of cured individuals. The potentiality of the proposed models is illustrated by means of four real data sets.     

Some topological and geometric properties of generalized Euler sequence space

In this paper, we introduce the Euler sequence space e ^r (p) of nonabsolute type and prove that the spaces e ^r (p) and l(p) are linearly isomorphic. Besides this, we compute the α-, β- and γ-duals of the space e ^r (p). The results proved herein are analogous to those in [ALTAY, B.—BASŠAR, F.: On the paranormed Riesz sequence spaces of non-absolute type, Southeast Asian Bull. Math. 26 (2002), 701–715] for the Riesz sequence space r ^q (p). Finally, we define a modular on the Euler sequence space e ^r (p) and consider it equipped with the Luxemburg norm. We give some relationships between the modular and Luxemburg norm on this space and show that the space e ^r (p) has property (H) but it is not rotund (R).     

Modelling with the Novel INAR(1)-PTE Process

Methodology and Computing in Applied Probability - In this paper, the first-order non-negative integer-valued autoregressive process with Poisson-transmuted exponential innovations is introduced....     

Some Artin-Schreier type function fields over finite fields with prescribed genus and number of rational places

We give existence and characterization results for some Artin-Schreier type function fields over finite fields with prescribed genus and number of rational places simultaneously.