基于支持向量描述的自适应高光谱异常检测算法

提出了一种应用于高光谱异常检测的自适应支持向量数据描述方法.根据高光谱数据和局部异常检测模型的特点,通过局部背景分波段二阶分布统计,分析了核参量与局部背景总体标准差的变化关系,构造了随检测背景变化的局部检测核参量,使得检测算法针对不同背景分布自适应地调整检测核参量.克服了传统支持向量描述算法由于采用固定核参量带来的复杂背景下检测性能下降的问题.通过模拟数据和真实高光谱数据的测试检验,接收机特性曲线表明该算法相对于传统固定核参量支持向量数据描述方法,在相同虚警概率下检测概率提高了10%.     

Simultaneous clock recovery and demultiplexing of a 320 Gb/s OTDM system using an optoelectronic oscillator based on cascaded MZM and PolM

An improved optoelectronic oscillator scheme for an optical time division multiplexing(OTDM) system based on cascaded Mach-Zehnder modulator(MZM) and polarization modulator(PolM) is experimentally investigated.The system can simultaneously realize clock recovery and demultiplexing.With the MZM working at peak point to generate return-to-zero-33 optical pulses and the PolM working as an equivalent intensity modulator,a high-quality clock signal with 35-fs timing jitter is extracted from the 160-GBaud OTDM-differential quaternary phase-shift keying signal.Narrow short optical switch gates(4 ps) are also generated to demultiplex 160-GBaud signals to 40-GBaud signals.Error-free performance is achieved with 2.4-dB power penalty in the worst case.     

共形Mikaelian声透镜设计*

该文研究了利用共形变换设计声学器件的一般方法,在此基础上根据普通Mikaelian透镜的折射率分布规律,利用指数映射设计出了弧形的Mikaelian透镜,分析并讨论了弧形透镜的密度、模量和折射率分布规律。对160 k Hz的声波进行了仿真实验,仿真结果表明,在弧形透镜的理论预测焦点处出现能量汇聚的现象,即实现了弧形聚焦的效果。同时,声波在经过该透镜后传播方向产生了一定角度的偏转。该工作为实现弧形声学器件提供了理论方法,在水下声探测及水下声通讯等方面有着潜在的应用。     

基于低相干光的阵列透镜束匀滑技术研究

基于激光加载的材料状态方程的实验研究对靶面光强分布的均匀性及稳定性提出了极高的要求,靶面光强的上述两大特性在很大程度上决定了实验结果的精度和可重复性.本文针对传统窄带高相干激光装置在激光加载材料状态方程实验中表现出的靶面光强均匀性和光强分布稳定性两方面可能存在的问题,提出了基于宽带低相干激光,利用消衍射阵列透镜联合诱导非相干技术的束匀滑方案,并重点分析了波前相位畸变对靶面不均匀性及稳定性的影响.模拟结果表明,该方法明显降低了靶面不均匀性,提高了对波前相位畸变的包容度,获得了均匀、稳定的光强分布.统计分析显示,焦斑强度分布极差和不均匀性与波前相位畸变均方根梯度相关性较强.因此,可以根据统计结果以及实验对焦斑强度分布的要求,给出波前相位畸变的容差范围,对状态方程实验中激光驱动器参数的设计与优化具有指导意义.     

平面圆形膜片式光纤布拉格光栅温度补偿压强传感

报道了利用光纤布拉格光栅反射波谱带宽展宽技术实现温度补偿的压强传感新方案。结合平面圆形膜片应变调谐的特点,采用膜盒式结构,将光纤光栅中心对准平面圆形膜片零应变半径并沿径向粘贴,利用反射波谱带宽对应变敏感而对温度不敏感的特性解调压强,成功地实现了温度补偿的压强传感测量。基于光谱分析仪0.05nm的光谱分辨力,实验测得带宽随压强响应灵敏度为0.34nm/MPa,压强精度为±0.15MPa,压强测量范围为0~7.5MPa。实验结果与理论分析基本一致。     

医用硬性内窥镜畸变的评定基础和方法

建立医用硬性内窥镜畸变的评定基础和方法,用视轴对称的球面Z视场为模型来模拟体腔凹面特征,以建立内窥镜物像共轭的分析基础;运用光学原理并结合ISO9039:1994“光学和光学仪器光学系统质量评价———畸变的测定”的定义原则,并根据理论畸变的临床要求确定畸变定义;采用主光线追迹原理推导不同球面Z形状的畸变换算通式。创立了医用硬性内窥镜以单位相对畸变表述的定义和表达式,并导出变换视场面的畸变换算通用公式和测试方法。本文建立的畸变评定基础和方法适用于医用硬性内窥镜的标准应用。     

一种改进的夜间数字能见度测量方法

为降低背景光噪声对数字摄像法夜间能见度测量的不确定性影响,对双光源法能见度测量系统进行改进。该系统利用避光筒限制CCD相机视场角,拍摄2个位于不同距离的LED背光源,然后对摄取到的图像进行处理得到光源图像的灰度值,再根据阿拉德定律求得大气消光系数,计算出大气能见度值。通过在无背景光、有背景光未加避光筒和加避光筒3种条件下的比对实验,分析光源图像的灰度信息,并将实验结果进行处理,得出有避光筒和无避光筒时测得的能见度值与无背景光下测量结果的相关系数分别是0.911 3和0.322 7,均方根相对偏差分别是6.87% 和23.38%。结果表明:系统抑制背景光噪声的能力明显增强,能较准确地测量夜间能见度。     

Two-dimensional MgSiP_2 with anisotropic electronic properties and good performances for Na-ion batteries

Using the global particle-swarm optimization method and density functional theory,we predict a new stable two-dimensional layered material:MgSiP_2 with a low-buckled honeycomb lattice.Our HSE06 calculation shows that MgSiP_2 is an indirect-gap semiconductor with a band-gap of 1.20 eV,closed to that of bulk silicon.More remarkably,MgSiP2 exhibits worthwhile anisotropy along with electron and hole carrier mobility.A ultrahigh electron mobility is even up to 1.29 × 104 cm~2 V ~1 s ~1.while the hole mobility is nearly zero along the a direction.The large difference of the mobility between electron and hole together with the suitable band-gap suggest that MgSiP_2 may be a good candidate for solar cell or photochemical catalysis material.Furthermore,we explore MgSiP2 as an anode for sodium-ion batte ries.Upon Na adsorption,the semiconducting MgSiP2 transforms to a metallic state,ensuring good electrical conductivity.A maximum theoretical capacity of 1406 mAh/g,a small volume change(within 9.5%),a small diffusion barrier(～0.16 eV) and low average open-circuit voltages(～0.15 V) were found fo r MgSiP2 as an anode for sodium-ion batteries.These results are helpful to deepen the understanding of MgSiP2 as a nanoelectronic device and a potential anode for Na-ion batteries.     

电子照相技术成像模拟研究

针对高能电子照相的关键物理过程开展蒙特卡罗照相模拟研究,采用Geant4围绕2.5 GeV电子在四极透镜组内的输运、电子与物质相互作用衰减等照相基本过程展开研究。通过设计不同材料、不同厚度的含缺陷平板作为模拟照相客体,开展放大型电子照相系统缺陷分辨能力模拟。此外,采用不同材料、不同厚度的台阶样品,模拟获得了电子束流穿过相应面密度材料后的线扩展函数,进一步评估电子照相对实心客体的探测分辨能力。     

Effects of pattern dependence on high-power polarization-division-multiplexing applications

High-power polarization-division-multiplexing (PDM) systems or functional modules, such as self-phase-modulation (SPM)-based all-optical regenerators, cross-phase-modulation (XPM)-based wavelength convertors or format convertors, all-optical logical gate, and so on, may suffer from the effects of pattern dependence. Such effects are experimentally investigated using relative time delay variation between bit sequences with orthogonal polarization states in a 2 × 10.65 Gb/s high-power on-off keying (OOK) PDM system. Eye-diagram-based signal-to-noise ratio (SNR) and bandwidth of broadened spectrum are measured and compared. An eye-diagram-based SNR fluctuation of up to 4 dB may occur as the delay changes.