Solventless Formation of G‐Quartet Complexes Based on Alkali and Alkaline Earth Salts on Au(111)

Template cations have been extensively employed in the formation, stabilization and regulation of structural polymorphism of G‐quadruplex structures in vitro. However, the direct addition of salts onto solid surfaces, especially under ultra‐high‐vacuum (UHV) conditions, to explore the feasibility and universality of the formation of G‐quartet complexes in a solventless environment has not been reported. By combining UHV‐STM imaging and DFT calculations, we have shown that three different G‐quartet‐M (M: Na/K/Ca) complexes can be obtained on Au(111) using alkali and alkaline earth salts as reactants. We have also identified the driving forces (intra‐quartet hydrogen bonding and electrostatic ionic bonding) for the formation of these complexes and quantified the interactions involved. Our results demonstrate a novel route to fabricate G‐quartet‐related complexes on solid surfaces, providing an alternative feasible way to bring metal elements to surfaces for constructing metal–organic systems.     

富缺陷BN负载的高分散Cu催化乙醇脱氢制乙醛

生物乙醇作为平台分子通过催化转化的方法可以制备烯烃、乙醛、丁醇和芳香化学品等,其中乙醛是生产乙酸、季戊四醇、三氯乙醛、山梨酸等重要化学品的原料.随着乙醛的需求量逐年增加,发展以乙醇直接脱氢生成乙醛的工艺,具有联产氢气、原子经济性高、产物易分离的优点,符合国际绿色低碳发展战略要求,有望替代当前乙烯氧化法生产工艺.乙醇分子...     

Synthesis and characterization of visible light responsive N-TiO2 mixed crystal by a modified hydrothermal process

N doped TiO₂ with anatase and rutile mixed crystal were prepared by using tetrabutyl titanate as the precursor via a modified hydrothermal process and calcination at 320 °C. The microstructure and morphology of samples were characterized by XRD, UV-vis-DRS, FTIR and XPS. The results showed that N-TiO₂ particles were crystallized to anatase and rutile mixed crystal structure; they were presented narrow particle size distribution, and the average particle size was ca. 13.5 nm calculated from XRD results. It was found that the N-doped TiO₂ particles showed strong visible-light absorption and high photocatalytic activity for the mineralization of Rhodamine B under irradiation by visible light (400-500 nm). The high visible-light photocatalytic activity of the obtained N-doped TiO₂ might result from the synergetic effect of nitrogen doping and the mixed lattice structure of N-TiO₂. Possible mechanism of N-TiO₂ mixed crystal formed under hydrothermal conditions was discussed.     

溶剂热法合成六方氮化硼纳米晶的影响因素研究

以Li_3N和BBr3为原料,采用溶剂热法在220 ℃合成了h-BN纳米晶,研究了反应时间、表面活性剂和诱导晶粒对产物的影响.研究结果表明:反应产物主要为h-BN,同时含有少量c-BN,随着反应时间从12 h延长至36 h,晶粒尺寸从20 nm增大至80 nm;十二烷基苯磺酸钠的引入可以控制产物颗粒尺寸在10 nm左右,并且使球形度得到提高;以h-AlN为诱导晶粒时,产物中六方相含量增加,并且出现了h-BN纳米棒.     

Cytosolic escape of mitochondrial DNA triggers cGAS-STING-NLRP3 axis-dependent nucleus pulposus cell pyroptosis

Low back pain (LBP) is a major musculoskeletal disorder and the socioeconomic problem with a high prevalence that mainly involves intervertebral disc (IVD) degeneration, characterized by progressive nucleus pulposus (NP) cell death and the development of an inflammatory microenvironment in NP tissue. Excessively accumulated cytosolic DNA acts as a damage-associated molecular pattern (DAMP) that is monitored by the cGAS-STING axis to trigger the immune response in many degenerative diseases. NLRP3 inflammasome-dependent pyroptosis is a type of inflammatory programmed death that promotes a chronic inflammatory response and tissue degeneration. However, the relationship between the cGAS-STING axis and NLRP3 inflammasome-induced pyroptosis in the pathogenesis of IVD degeneration remains unclear. Here, we used magnetic resonance imaging (MRI) and histopathology to demonstrate that cGAS, STING, and NLRP3 are associated with the degree of IVD degeneration. Oxidative stress induced cGAS-STING axis activation and NLRP3 inflammasome-mediated pyroptosis in a STING-dependent manner in human NP cells. Interestingly, the canonical morphological and functional characteristics of mitochondrial permeability transition pore (mPTP) opening with the cytosolic escape of mitochondrial DNA (mtDNA) were observed in human NP cells under oxidative stress. Furthermore, the administration of a specific pharmacological inhibitor of mPTP and self-mtDNA cytosolic leakage effectively reduced NLRP3 inflammasome-mediated pyroptotic NP cell death and microenvironmental inflammation in vitro and degenerative progression in a rat disc needle puncture model. Collectively, these data highlight the critical roles of the cGAS-STING-NLRP3 axis and pyroptosis in the progression of IVD degeneration and provide promising therapeutic approaches for discogenic LBP.Subject terms: Cell death, Diseases     

Zinc-Guided 3D Graphene for Thermally Chargeable Supercapacitors to Harvest Low-Grade Heat

Low-grade heat energy recycling is the key technology of waste-heat utilization, which needs to be improved. Here, we use a zinc-assisted solid-state pyrolysis route to prepare zinc-guided 3D graphene (ZnG), a 3D porous graphene with the interconnected structure. The obtained ZnG, with a high specific surface area of 1817 m²·g⁻¹ and abundant micropores and mesopores, gives a specific capacitance of 139 F·g⁻¹ in a neutral electrolyte when used as electrode material for supercapacitors. At a high current density of 8 A·g⁻¹, the capacitance retention is 93% after 10,000 cycles. When ZnG is used for thermally chargeable supercapacitors, the thermoelectric conversion of the low-grade heat energy is successfully realized. This work thus provides a demonstration for low-grade heat energy conversion.     

溶剂比对Mn-ZnO复合纳米线形貌及吸附脱硫研究

采用水热法合成了Mn-ZnO复合纳米线,通过改变溶剂比来考察其对Mn-ZnO形貌的影响,并用等体积浸渍法负载金属Ni,制备反应吸附脱硫剂,以正庚烷/噻吩为模拟油并在固定床反应器装置上评价反应吸附脱硫性能.通过XRD、BET、SEM等方法对该催化剂进行表征;研究表明:溶剂比不同可导致Mn-ZnO复合物形貌的不同,从而影响脱硫性能.以乙醇溶液为溶剂制备的脱硫催化剂脱硫率可达99;左右,并且具有良好的稳定性.     

旋涂法制备掺杂BiOX薄膜及光催化性能研究

采用旋涂的方法在基底材料表面原位生长BiOX(X=C1、Br、I)薄膜材料.样品的晶体结构和光学性质等通过X射线粉末衍射(XRD)、透射电子显微镜(TEM)、紫外可见漫反射光谱(UV-Vis)进行了表征.结果表明旋涂法制备的BiOX薄膜是纯净的,无其他杂质,均匀性好.通过对BiOX薄膜材料的光催化性能和瞬态表面光电压技术(TPV)进行了研究,发现卤素掺杂的BiOBr0.48I052具有较好的光催化性能.其结果表明催化性能提高的原因可能是BiOBr0.48I0.52薄膜在光照下可以产生更强的光生载流子并具有更长的光生载流子寿命.     

基于二维光栅分光的同步移相干涉测量技术

为了干涉测量的抗振目的,提出了一种新的同步移相干涉测量方案并搭建了实验装置。整个测量系统在迈克耳孙偏振移相干涉仪的基础上,利用一个正交的二维光栅产生对称分光,选取对于理想光栅衍射效率一致的(±1,±1)级衍射光作为测量分光路,使之分别通过偏振方向依次相差45°的一个偏振片组,从而分别形成0°、90°、180°和270°相移的四幅移相干涉图,按照传统的四步移相算法,对被测波面进行了复原。分析了光强畸变和移相误差对系统的测量误差的影响。利用该系统测量一球面系统,结果与在ZYGO干涉仪上相比较,球面系统的均方根误差相差0.012λ,峰谷值相差0.051λ。     

双螺旋叠栅条纹检测光束准直性的两种方法

介绍双螺旋叠栅条纹检测光束准直性的基本原理,进一步就双螺旋叠栅条纹的特征参量与被测光束发散角(即光束准直精度)的关系进行分析和推导。在分析双螺旋叠栅条纹进行时,首先采用频域低通滤波提取纯叠栅条纹,然后提取纯叠栅条纹的特征参量。提出两种特征参量的提取方法,一种依次进行傅里叶变换计算相位信息的傅里叶变换方法,另一种是受传统时间相移算法启发而提出的空间相移算法,讨论了在两种方法中极坐标的重采样问题和相应的计算公式,并进行了计算机模拟。结果表明,傅里叶变换方法和空间相移算法实质都是获取叠栅条纹全场趋势的平均值,使最终光束发散角的检测具有很高的精度,对自成像条纹周期的检测误差在±2.8‰以内。