Predicting Polymorphism of Electrospun Polyvinylidene Fluoride Membranes by Their Morphologies

Although electrospinning of polyvinylidene fluoride (PVDF) has been studied for more than 10 years, the crystalline phase differentiation of the electrospun mats is still normally through the combination of different characterization techniques, and the relationship between polymorphism and morphology of the fibers in electrospun PVDF membranes has never been reported. Here, we show their close relationships by conducting room-temperature electrospinning experiments on various polymer/solvent systems. The electrospun membranes full of bead-free fibers have a very high fraction of β-phase, F(β), over 90%, and high orientation, whereas the membranes comprising beads and/or a large number of beaded fibers most often result in a low fraction of β-phase (F(β) normally below 50%) and low orientation. On the other hand, electrospun membranes consisting of both bead-free fibers and a very limited number of beaded fibers showed a medium high fraction of β-phase, F(β) more than 70% but less than 90%. These findings suggest the feasibility of intuitively predicting the crystalline phase of electrospun PVDF membranes directly by their morphologies, which is obviously simple, inexpensive and convenient for future investigations.     

Comparative pyrolysis upcycling of polystyrene waste: thermodynamics, kinetics, and product evolution profile

Pyrolysis is one important way to treat polystyrene waste and upcycle it into useful materials. A comparative pyrolysis study of virgin polystyrene (VPS) and two types of commonly used polystyrene products, expanded polystyrene (EPS) and polystyrene container (CPS) was carried out. Various values were found in the thermodynamic study and kinetic study of VPS, EPS, and CPS pyrolysis, suggesting distinct thermal degradation characteristics of these materials. The energy barrier order of the pyrolysis processes was EPS, CPS, VPS, showing activation energy of 230, 219, and 145 kJ mol^?1, respectively. The order of amount of heat absorbed was EPS, CPS, VPS, with enthalpy of 224, 213, and 139 kJ mol^?1, respectively. The reaction favorability order was EPS, CPS, and VPS with Gibbs free energy of 118, 132, and 210 kJ mol^?1, respectively. Thermogravimetric analysis indicated the use of high heating rate would increase the reaction rate and shorten the reaction time. Product evolution profiles showed that VPS and CPS pyrolysis produced mainly aromatics, while EPS pyrolysis produced aromatics at the initial phase of the reaction and aliphatic hydrocarbon at the latter phase. The diverse pyrolysis behaviors of VPS, EPS, and CPS demonstrated that an examination on different polystyrene materials was desired to optimize the pyrolysis conditions and product distribution, and thus benefit the process of valuable materials recovery.     

Simple and Efficient Synthesis of Belinostat

A novel synthesis of belinostat (1) starting from 3-nitrobenzaldehyde has been developed. The key step in this sequence involves the conversion of (2E)-3-(3-aminophenyl)acrylic acid methyl ester to (2E)-3-(3-chlorosulfonylphenyl)acrylic acid methyl ester via diazotization and sulfonylation.     

Surface-Modified Sb2S3 Nanoparticles and Their Tribological Behaviors in Liquid Paraffin

Sb₂S₃ nanoparticles surface-modified with S-tetradecyl N, N-dihydroxyethyl dithiocarbamate (C₁₄DTC-Sb₂S₃) have been synthesized via extraction of Sb₂S₃ colloidal particles from ethylene glycol into toluene in the presence of C₁₄DTC. The obtained products were characterized by high-resolution transmission electron microscope (HRTEM) and Fourier transformation infrared (FTIR), and their tribological behaviors as an additive in liquid paraffin were investigated using a four-ball tribometer. The results show that C₁₄DTC-Sb₂S₃ nanoparticles can significantly improve the friction reduction, anti-wear, and load-carrying properties of base oils. The preliminary lubrication mechanism was discussed based on the SEM and XPS investigation of the rubbed surfaces.     

Fabrication and characterization of an irradiation facility for large-sample geometry

An irradiation facility consisting of a modified beam port shielding plug has been designed, fabricated built and characterized for use in irradiating non-standard sample geometries. The shielding plug features a graphite moderator at the core end with a hole, or “well” drilled of sufficient diameter and depth to accommodate an eight ounce (227 gram) sample bottle. Added shielding behind the graphite consists of castable neutron- and -gamma-ray shielding. The modified shielding plug can be removed relatively quickly from its irradiation position to minimize personnel exposures. It is mounted in close proximity to the Ohio State University Research Reactor reactor core to allow performance of high-sensitivity neutron activation analysis studies. Using the SAND-II unfolding code, the energy-dependent neutron flux has been measured in the sample irradiation position. When operating at 100 % power, the total flux is 3.9 × 10¹² n/cm²/s. Of this, 55 % is thermal (<0.5 eV), 23 % is epithermal (>0.5 eV, <0.5 MeV), and 22 % is “fast” (>0.5 MeV). This makes the facility suitable for neutron activation studies. Recently it has been used for irradiation of filter papers collected in a study of particulate air pollution in the form of atmospheric particulate matter in an urban environment.     

基于数字式MEMS传感器的声阵列成像系统设计*

常规驻极体传声器阵列成像系统存在数据采集系统复杂、体积大的问题,因而阵列传感器数量一般不超过60个,成像质量较差。为此,本文以数字式MEMS声传感器基础设计了260个传感器的声阵列,数据采集系统由FPGA控制,并嵌入到前端阵列中,后端是在另一个FPGA控制下的1个DSP芯片和2个PC104模块组成的集成系统,其中高速DSP芯片完成阵列信号处理以实现声成像功能。该系统能够实现对普通车间环境下机械设备噪声、气体泄漏噪声的现场成像测试,形成动态声像图。测试表明,该系统抗干扰能力强、声像分辨率高、成像速度快,实用效果良好。     

Synthesis and application of moisture-stable methallylsilanated phosphorylcholine as a surface modifier

New methallylsilanated phosphorylcholine (MASPCs) were synthesized via a copper-catalyzed ‘click’ reaction and demonstrated excellent moisture stability. Hydroxylated silicon compounds, silanol, and silica were grafted or modified by MASPCs in the presence of triflic acid (TfOH) and they possessed a good grafting efficiency and high loading rate.     

Practical and Highly Selective C?H Functionalization of Structurally Diverse Ethers

A trityl ion mediated C H functionalization of ethers with a wide range of nucleophiles at ambient temperature has been developed. The reaction displays high chemoselectivity and good functional group tolerance. The protocol also exhibits excellent regio‐ and diastereoselectivities for the unsymmetric ethers, thus stereoselectively generating highly functionalized disubstituted 2,5‐trans tetrahydrofurans (THF), 2,6‐trans tetrahydropyrans (THP), 2,6‐trans dihydropyrans (DHP), and 1,3‐trans isochromans, and highlighting the capacity of the protocol in complex molecule synthesis.     

Two novel polycyclic spiro lignans from Gymnotheca involucrata

Two novel lignans, gymnothespirolignans A (1) and B (2), possessing a rare polycyclic spiro skeleton, were isolated from the endemic plant of Gymnotheca involucrata Pei. Their structures were determined by spectroscopic evidences and the absolute configurations were confirmed by single crystal X-ray diffraction analysis. Compounds 1 and 2 showed promising antiviral activities against RSV with an IC₅₀ value of 31.87 and 17.51 μM, respectively.     

Unveiling the correlation between non‐diffracting tractor beam and its singularity in Poynting vector

This paper investigates the singular optics of nonparaxial light beams in the near field when the light behaves as a tractor beam. New insights into the optical pulling force, which is usually represented by integrating the stress tensor at a black box enclosing the object, are interpreted by the optical singularity of the Poynting vector. The negative nonconservative pulling force originates from the transfer of the azimuthal Poynting vector to the longitudinal component partly owing to the presence of a scatterer. The separatrice pattern and singularity shifts of the Poynting vector unanimously exhibit a differentiable near‐field distribution in the presence of optical pulling force. A new method is established to calculate the near‐field optical force using the differential Poynting vector in the far field. The results obtained provide a clear physical interpretation of the light–matter interaction and manifest the significance of singular optics in manipulating objects.