Molecularly imprinted polymers on the surface of silica microspheres via sol‐gel method for the selective extraction of streptomycin in aqueous samples

Streptomycin‐imprinted silica microspheres were prepared by combining a surface molecular‐imprinting technique with the sol‐gel method. A mixture of tetrahydrofuran, ethanol, and water (6:1:1, v/v/v) was selected as dispersing solvent while 3‐aminopropyltriethoxysilane and triethoxyphenylsilane acted as functional monomers, and tetraethyl orthosilicate as a cross‐linker. Characterization of the molecularly imprinted polymers was conducted using scanning electron microscope and dynamic binding experiments. As compared to the nonimprinted polymers, the imprinted polymers exhibited a higher degree of saturated adsorption volume up to 26.3 mg/g, and better selectivity even in an aqueous solution with interfering compounds, including dihydrostreptomycin, neomycin, and tetracycline. The adsorption ability and selectivity were observed to be influenced by the mole ratio of 3‐aminopropyltriethoxysilane and triethoxyphenylsilane. Feasibility of the polymers to be used for actual application was also evaluated with spiked samples, indicating great potential for large‐scale applications. Moreover, the streptomycin‐imprinted polymers can be repeatedly used for 12 cycles without losing original performance, which is beneficial for commercial use.     

后处理对TiO_2纳米薄膜的表面结构和光催化活性的影响

半导体TiO2光催化材料对环境中各种污染物的明显去除效果已引起人们的广泛关注犤1～6犦。在普通钠钙玻璃表面涂制高光催化活性的TiO2纳米薄膜,制成环保建筑材料,不仅可以自洁玻璃表面,而且可以用于净化空气、处理废水等。但由于在热处理过程中玻璃基体内的Na+离子扩散到薄膜表面,形成光生电子和空穴的复合中心,使TiO2纳米薄膜的光催化活性大大降低犤7～10犦。为了减少玻璃中Na+离子对TiO2薄膜光催化活性的有害影响,Paz等犤8犦研究了将钠钙玻璃浸入酸溶液中,使玻璃表面的钠离子被酸中的氢离子置换出来;在玻璃表面形成SiO2凝胶层,以便阻…     

ZIF-8材料的制备及应用进展

沸石咪唑酯骨架材料(Zeolitic Imidazolate Framework-8,ZIF-8)是由Zn（Ⅱ）与2-甲基咪唑配位自组装形成的多孔结晶材料,具有可调的孔径、高稳定的结构和催化活性等特点,近年来ZIF-8的制备和应用展现出巨大的潜力并引起了广泛关注。本文总结了目前ZIF-8的制备方法,在此基础上介绍了ZIF-8的形成机理及粒径调控方法,重点综述了ZIF-8及其复合材料在吸附分离、催化、生物医学等领域应用的研究进展,并展望了其应用前景与发展方向,以期为ZIF-8 的应用发展开拓新的思路。     

钼酸根阴离子在增强聚苯胺包覆的镍钴层状氢氧化物的电容和析氧行为中的关键作用

理论容量大且过电位低的层状氢氧化物(LDHs)是极有前景的超级电容电池和析氧反应的电极材料;然而,体相LDHs的低电导率和活性位点不足增加了电极的内阻,降低了电极容量和产氧效率.本文采用两步法制备了聚苯胺包覆的MoO42?插层的镍钴层状双金属氢氧化物复合电极(M-LDH@PANI).随着LDH中MoO42?含量的增加,针状的LDH微球逐渐演化为具有较高比表面积的片状M-LDH微球,这为整个电极提供了更多的电化学位点.此外,非晶态的聚苯胺包覆提高了复合电极的电导率.在引入适量MoO42?插层离子时,M-LDH@PANI表现出显著强化的储能和催化性能.所获得的M-LDH@PANI-0.5在析氧反应中表现出优越的电催化活性(10 mA cm?2时的过电位为266 mV),作为超级电容电池电极则具有864.8 C g?1的高容量.采用M-LDH@PANI-0.5作为正极及以活性炭作为负极组装的超级电容电池在功率密度为8,300.0 W kg?1时能量密度为44.6 Wh kg?1,且具有优异的循环稳定性(10000次循环后保留83.9％的初始容量).本文为LDH基材料的阴离子插层改性增强材料性能的机理提供了一个非传统的解释.在上述研究基础上,采用射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、高分辨透射电镜(HRTEM)和比表面积测试(BET)等手段对样品进行了深入表征.XRD结果表明,MoO42?插层的LDH材料的层间晶面(003)的峰随着MoO42?含量的增加而逐渐消失,这是由于晶面间距越大越容易受到晶粒细化的影响,间距大的晶格更容易受到破坏,导致晶格的展宽和弱化,从而间接证明MoO42?的成功插层.SEM、HRTEM和BET测试结果表明,MoO42?的含量对材料的形貌和比表面积具有重大影响.利用XPS对样品的价态进行了研究,发现随着MoO42?含量的增加,Co和Ni的价态没有明显变化.电化学测试结果表明,电极的储能和催化性能随MoO42?含量的增加而先增加后减小.利用理论计算分析了MoO42?在LDH中的插层行为,发现少量的MoO42?有利于扩大LDH的层间间距,而过量的MoO42?则会与LDH的H原子结合,从而与电解液中的OH?竞争,导致复合电极的电化学性能下降.此外,MoO42?插层的片状微球能有效调节材料的去质子化能,大大加速电极表面的氧化还原反应.因此,MoO42?插层能够显著强化LDH基材料的超级电容电池电极和OER催化剂电化学性能.     

醋酸铜促进的酰胺-噁唑啉化合物与芳基硫醇的C—H键双硫代化反应研究

以酰胺-噁唑啉为辅助基团,在廉价的醋酸铜促进下,实现了酰胺衍生物C(sp2)—H键与芳基硫醇S—H键的脱氢偶联反应;以中等到优秀的产率(最高可达90%)简单高效地合成了一系列双硫化的酰胺衍生物.值得一提的是,底物范围并不局限于各种取代苯基酰胺化合物,吡啶基酰胺化合物也可以兼容.该反应的特点是:金属廉价、底物范围广、反应条件温和、无需外加配体、空气作为氧化剂、区域选择性好(仅酰胺基团邻位的C—H键发生反应,而噁唑啉基团邻位的C—H键不发生反应);此外,克级规模的反应表明了其在合成中的实用性.     

基于硅杂蒽类染料的荧光探针及其应用

近年来,荧光成像技术为人们研究活体细胞及组织内的化学生物学过程提供了有效的研究工具,可以无损、实时、原位地以高时空分辨率实现对目标物进行生物荧光成像与分析。荧光成像技术在生物学、环境监测、临床诊断和药物发现等诸多研究领域发挥着越来越重要的作用。生物荧光成像技术的最新进展对发展新型小分子荧光染料及探针提出了更高的要求。激发和发射波长位于近红外光区（600~900 nm）的荧光染料及探针由于具有光毒性低、生物分子自发荧光干扰小、光散射低、组织穿透能力强等优点,非常适合用于生物荧光成像领域。通过将罗丹明分子中O桥原子用Si代替,得到了一类新型的探针分子--硅杂蒽类荧光探针。这类染料分子在保留了氧杂蒽荧光染料优越的光学性质的同时,光谱发生明显红移,满足了近红外荧光检测的要求,具有良好的生物相容性。本文综述了近年来基于硅杂蒽及其衍生物荧光探针的合成及在金属离子、pH值、小分子、生物酶等检测方面的研究进展,并且简要阐述了基于硅杂蒽类探针分子的识别检测机理以及其在生物成像等方面的应用。     

One-pot synthesis of peony-like Bi2S3/BiVO4(040) with high photocatalytic activity for glyphosate degradation under visible light irradiation

In this work, samples consisting of BiVO₄ with exposed (040) facets coupled with Bi₂S₃ (Bi₂S₃/BiVO₄) were prepared through a one-pot hydrothermal method, using ethylenediaminetetraacetic acid as directing agent and L-cysteine as sulfur source and soft template. X-ray diffraction, field emission scanning electron microscopy, and high-resolution transmission electron microscopy measurements indicated that the Bi₂S₃ content had a significant influence on the growth of (040) and (121) facets as well as on the morphology of the Bi₂S₃/BiVO₄ samples. When the Bi₂S₃ content reached 1 mmol, the Bi₂S₃/BiVO₄ samples exhibited a peony-like morphology. The results of transient photocurrent tests and electrochemical impedance spectroscopy measurements confirmed that a more effective charge separation and a faster interfacial charge transfer occurred in Bi₂S₃/BiVO₄ than BiVO₄. The enhanced photocatalytic activity of the Bi₂S₃/BiVO₄ samples could be attributed to the improved absorption capability in the visible light region and the enhanced electron-hole pair separation efficiency due to the formation of the Bi₂S₃/BiVO₄ heterostructure. In addition, the Bi₂S₃/BiVO₄ samples showed relative stability and reusability. The simple method presented in this work could be used to fabricate composite photocatalysts with high activity for different applications, such as photocatalytic degradation of organic pollutants, photocatalytic splitting of water, and photocatalytic reduction of carbon dioxide.     

Photocatalytic removal of tetracycline by a Z-scheme heterojunction of bismuth oxyiodide/exfoliated g-C3N4: performance,mechanism, and degradation pathway

Antibiotics, once being released into the environment, become recalcitrant organic pollutants, which pose a potential risk to ecological balance and human health. In this study, a Z-scheme heterojunction of bismuth oxyiodide (BiOI)/exfoliated g-C₃N₄ (BiOI/ECN hereafter) was synthesized by the combination of thermal exfoliation of g-C₃N₄ and chemical precipitation of BiOI for efficient photocatalytic degradation of tetracycline in aqueous solutions under visible light irradiation. The optimized BiOI/ECN delivered an outstanding degradation rate at circa 0.0705 min^?1, which was 10 times higher than that of the bulk g-C₃N₄. The photocatalytic degradation efficiency of tetracycline remained almost unchanged in a pH range of 3–11, and the BiOI/ECN displayed an excellent photostability upon recycled usage. The photocatalytic mechanism of tetracycline was ascribed to the main reactive oxidation species of photogenerated holes and superoxide radicals. In addition, the possible degradation pathways of tetracycline were investigated by HPLC-MS to identify intermediates. The toxicity of photocatalytic-generated intermediates of tetracycline was found significantly alleviated according to the calculation of quantitative structure–activity relationship prediction. This work not only provides an attractive photocatalyst for the removal of tetracycline but also opens a new avenue for rational design of Z-scheme heterojunction composites for tetracycline degradation.     

求解完全强非线性自治系统周期解及其稳定性的三变量迭代法

本文提出用广义位移x,基波幅值变化率da/dt=A(a)和系统频率ω(a)进行迭代的一种解析方法——三变量迭代法,求解一般的二阶完全强非线性自治系统的周期解及其稳定性。通过若干实例计算,表明了该方法行之有效。     

大开口复合材料加筋壁板稳定性分析

运用大型有限元软件Patran/Nastran分析了大开口复合材料加筋壁板的稳定性,并对不同加筋方式下壁板屈曲特征值和屈曲模态图进行了比较。结果表明:补强提高了大开口复合材料壁板的稳定性,但往往无法达到很好的效果,需要通过加筋改善其稳定性;加筋复合材料壁板稳定性较原有模型有较大提高;加筋大开口复合材料壁板屈曲特征值随筋条距开口中心距离的增加而减小,其屈曲分界线均位于筋条布置处;纵筋大开口复合材料加筋壁板一阶屈曲特征值为2.13,而横筋只达到1.08;纵筋布置对复合材料壁板稳定性影响明显高于横筋布置,可在实际工程应用中适当增加纵筋的布置。