Catalytic Performance of Graphite Oxide Supported Au Nanoparticles in Aerobic Oxidation of Benzyl Alcohol: Support Effect

Various Au/GO catalysts were prepared by depositing Au nanoparticles on thermally- and chemically-treated graphite oxide (GO) supports using a sol-immobilization method. The surface chemistry and structure of GO supports were characterized by a series of analytical techniques including X-ray photoelectron spectroscopy, temperature-programmed desorption and Raman spectroscopy. The results show that thermal and chemical treatments have large influence on the presence of surface oxygenated groups and the crystalline structure of GO supports. A strong support effect was observed on the catalytic activity of Au/GO catalysts in the liquid phase aerobic oxidation of benzyl alcohol. Compared to the amount and the type of surface oxygen functional groups, the ordered structure of GO supports may play a more important role in determining the catalytic performance of Au/GO catalysts.     

弥散型核燃料元件热应力的计算模拟

针对弥散型燃料板的具体形状,选择了一种能够反映其实际变形特征的三维代表性体积单元作为研究对象;利用有限元法对其热力耦合行为进行了弹塑性分析,研究了热应力在燃料和基体中的分布特征.     

参数激励与强迫激励联合作用下非线性振动系统的余维2退化分叉

在本文里我们首先研究了具有Z_2-对称性的范式理论和退化向量场的普适开折理论。然后利用上述理论研究了参数激励与强迫激励联合作用下非线性振动系统的余维2退化分叉,从而解决了当解具有两个零特征值时解的稳定性问题。最后利用Melnikov方法求出了参数平面上的同宿分叉曲线,讨论了全局分叉的存在性。     

电磁波在大面积等离子体片中传播特性的分析

脉冲磁约束线形空心阴极放电形成的大面积等离子体片可应用于等离子体天线、隐身及模拟超音速飞行器表面的等离子体鞘套. 本文首次利用实测等离子体片电子密度时空分布和横向场传播矩阵法, 研究了电磁波在等离子体片中反射率、透射率、吸收率随频率及脉冲放电时间的变化特征. 结果表明: 极化方向平行磁场的电磁波, 在小于截止频率的低频带内具有较高的反射率和吸收率, 增大电流, 反射率增加, 吸收率下降, 在大于截止频率的高频带内反射率和吸收率较低, 增大电流, 透射率下降, 吸收率升高; 极化方向垂直磁场的电磁波在高混杂谐振频率附近存在吸收率明显增强的吸收带, 谐振吸收峰值与放电电流无关; 脉冲放电期间, 电磁波的反射率、透射率与吸收率由不稳定过渡到稳定的时间约为100 μs, 过渡时间随着放电电流的增加而增大, 极化方向垂直磁场、小于截止频率的电磁波在稳定放电阶段谐振吸收较强. 本文的研究成果对利用等离子体片实现对电磁波的稳定高反射作用具有重要意义.     

Kinetics and mechanism of oxidation of <Emphasis Type="Italic">N</Emphasis>-methylethylamine by bis(hydrogenperiodato)argentate(III) complex anion

Oxidation of N-methylethylamine by bis(hydrogenperiodato)argentate(III) ([Ag(HIO₆)₂]⁵⁻) in alkaline medium results in demethylation, giving rise to formaldehyde and ethylamine as the oxidation products. The oxidation kinetics has been followed spectrophotometrically in the temperature range of 20.0–35.0 °C, and shows an overall second-order character: being first-order with respect to both Ag(III) and N-methylethylamine. The observed second-order rate constants k′ increase with increasing [OH⁻] of the reaction medium, but decrease with increasing the total concentration of periodate. An empirical rate expression for k′ has been derived as: k′ = (k _a + k _b[OH⁻])K ₁/{f([OH⁻])[IO₄ ⁻]_tot + K ₁}, where k _a and k _b are rate parameters, and K ₁ is an equilibrium constant. These parameters have been evaluated at all the temperatures studied, enabling calculation of activation parameters. A reaction mechanism is suggested to involve two pre-equilibria, leading to formation of an intermediate Ag(III) complex, namely [Ag(HIO₆)(OH)(MeNHEt)]²⁻. In the subsequent rate-determining steps, this intermediate undergoes inner-sphere electron transfer from the coordinated amine to the metal center via two distinct routes, one of which is spontaneous while the other is mediated by a hydroxide ion.     

Production of formic and acetic acids from phenol by hydrothermal oxidation

Hydrothermal technology is a core environmental-protection technique which can be used for waste water treatment and biomass conversion. In this paper a novel idea, alkaline hydrothermal oxidation, is proposed for producing formic and acetic acids from wastewater containing phenolic compounds. The effects of the most important conditions??reaction temperature, reaction time, oxygen supply, and type of alkaline catalyst??on yields of formic and acetic acids were investigated. The results indicated that the optimum conditions for production of formic and acetic acids were: reaction temperature 300???C, reaction time 90?s, H₂O₂ equivalent to 60% oxygen, and NaOH concentration 1.5?mmol. Under the optimum conditions the yields of formic and acetic acids reached 4.8 and 23.5%, respectively. In addition, the effect of different alkalis on yields of formic and acetic acids was also investigated. The results showed that compared with use of NaOH addition of KOH had a more pronounced effect on improving the yield of acetic acid. This research indicated that high-value-added formic and acetic acids can be recovered as resources by hydrothermal oxidation of phenolic wastewater, and thus hydrothermal oxidation has high potential for converting phenolic compounds in wastewater into value-added products.     

Electrochemical determination of nitrite and iodate based on Pt nanoparticles self-assembled on a chitosan modified glassy carbon electrode

A promising electrochemical sensor was fabricated by the self-assembling of Pt nanoparticles (nano-Pts) on a chitosan (CS) modified glassy carbon electrode (GCE). A field-emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM) and electrochemical techniques were used for characterization of these composites. It has been found that nano-Pts are inserted into the CS layer uniformly, and have a larger surface area compared to the chitosan modified glassy carbon electrode. Electrocatalytic experiments for the oxidation of nitrite and the reduction of iodate have shown that nano-Pts/CS/GCE can decrease the over-potential and increase the faradic current, which can be used for the sensitive determination of nitrite and iodate. Moreover, the prepared modified electrode exhibits good reproducibility and stability, and it is possible that this novel electrochemical sensor can be applied in the sensing and/or biosensing field.     

Enhanced indirect fluorescence detection of p-nitrophenol, 2,4-dinitrophenol and trinitrophenol by micellar electrokinetic capillary chromatography with in-column optical-fiber LED-induced fluorescence detection

Enhanced indirect fluorescence detection with in-column optical-fiber LED-induced fluorescence (LED-IF) detection has been developed for the simultaneous separation and determination of p-nitrophenol, 2,4-dinitrophenol and trinitrophenol. The instrumental set-up is simple, cost-effective and the detection method is stable. Different experimental parameters have been studied. The optimum conditions were determined as: running buffer (pH 9.1) composed of 10 mM borate, 80 mM sodium dodecylsulfate and 0.18 μM fluorescein (as a background reagent); applied voltage of 15 kV; working temperature of 25.0 °C. The limits of detection (S/N = 3) were 11, 18 and 16 μM for p-nitrophenol, 2,4-dinitrophenol and trinitrophenol, respectively. The nitrophenols were completely separated in 13 min and the number of theoretical plates for p-nitrophenol, 2,4-dinitrophenol and trinitrophenol were 8.1 × 10(6), 6.5 × 10(6) and 8.4 × 10(6), respectively. The RSDs (n = 6) for the migration time and the peak area were better than 0.85 and 0.91%, respectively. Our proposed method possesses the advantages of rapidness and good separation efficiency.     

Hydrothermal conversion of cellulose into lactic acid with nickel catalyst

Utilization of biomass has become a major topic of research around the world. One promising aspect of utilization is production of lactic acid from carbohydrate biomass. Our previous study showed that lactic acid can be formed from glucose and cellulose by alkaline hydrothermal reactions, but the yield of lactic acid was low, particular for cellulose. In this study, an efficient method for producing lactic acid from cellulose under hydrothermal conditions with NaOH in the presence of nickel was developed. Experiments were conducted in a batch reactor at 300 °C for 1?C4 min. Results showed that nickel could promote the yield of lactic acid from cellulose. The highest yield of 34.07% was obtained by adding 0.5 mmol nickel using 2.5 M NaOH solution at 300 °C for 1 min.