钨的溶剂萃取

本文简要地讨论了钨的溶剂萃取,重点讨论了萃取剂的结构对钨的萃取性能以及金属分离的影响。     

C NMR spectra of cyclomercurated ferrocenylimines: Substituent effects and conformations in the ferrocenes

Three series of cyclomercurated ferrocenylimines (2-chloromercurio-ferrocenylimines) have been studied using ¹³C NMR spectroscopy. Good to excellent linear relationships have been found to exist between the chemical shifts of the carbon atoms in the ferrocenyl moiety and normal Hammett substituent constants σ_m and σ_p. The δ values of the iminyl carbon atoms show excellent linear correlations with the σ values. In three series of the ferrocenes, the sensitivity of the carbon atoms to the substituent effect is different, which is discussed in terms of the twist angle between the N-phenyl ring and the C---C=N---C plane. The relative sensitivity of the chemical shifts on different positions in ferrocenyl moiety to the substituent effect has also been presented.     

Ion-exclusion chromatography with conductimetric detection of aliphatic carboxylic acids on a weakly acidic cation-exchange resin by elution with benzoic acid-beta-cyclodextrin

In this study, an aqueous solution consisting of benzoic acid with low background conductivity and beta-cyclodextrin (beta-CD) of hydrophilic nature and the inclusion effect to benzoic acid were used as eluent for the ion-exclusion chromatographic separation of aliphatic carboxylic acids with different pKa values and hydrophobicity on a polymethacrylate-based weakly acidic cation-exchange resin in the H+ form. With increasing concentration of beta-cyclodextrin in the eluent, the retention times of the carboxylic acids decreased due to the increased hydrophilicity of the polymethacrylate-based cation-exchange resin surface from the adsorption of OH groups of beta-cyclodextrin. Moreover, the eluent background conductivity decreased with increasing concentration of beta-cyclodextrin in 1 mM benzoic acid, which could result in higher sensitivity for conductimetric detection. The ion-exclusion chromatographic separation of carboxylic acids with high resolution and sensitivity was accomplished successfully by elution with a 1 mM benzoic acid-10 mM cyclodextrin solution without chemical suppression.     

Selective Determination of Trace Mercury (II) after Preconcentration with 4-(2-Pyridylazo)-Resorcinol-Modified Nanometer-Sized SiO2 Particles from Sample Solutions

A rapid, selective method that utilize 4-(2-Pyridylazo)-resorcinol (PAR)-modified nanometer SiO₂ (nanometer SiO₂–PAR) as a new solid-phase extractant for preconcentration of trace mercury (II) has been developed. The adsorption property of nanometer SiO₂–PAR for metal ions was studied by selectively extracting different metal ions from aqueous solutions. The results revealed an excellent affinity of the nanometer SiO₂–PAR for mercury (II) in presence of interfering metal ions at pH 4. The main parameters of solid-phase extraction such as shaking time, elution and sample dilution effect were studied. The extractant shows rapid kinetic sorption, and the adsorption equilibrium of mercury (II) on nanometer SiO₂–PAR was achieved in less than 2 min. The adsorbed mercury (II) was easily eluted by 4 mL of 6 mol L⁻¹ HCl. The maximum preconcentration factor was 50. The maximum static adsorption capacity was 276 μmol g⁻¹ at pH 4. The detection limit (3σ) was 0.43 μg L⁻¹ for cold vapor atomic absorption spectrometry (CVAAS), and the relative standard deviation of the eight replicate determinations was 2.4% for the determination of 2.0 μg of Hg(II) in 100 mL water sample. The method was applied to the determination of trace mercury (II) in sample solutions with satisfactory results.     

ortho-Mercuration of ferrocenylimines

The mercuration of a series of aryliminomethylferrocenes occurred predominantly in an ortho-position of the substituted ferrocenyl ring to yield 2-mercurated ferrocenylimines. The regiospecificity of this reaction suggests that the mercury is directed into the ortho-position by coordination of the mercury to imino nitrogen with subsequent electrophilic substitution. The chromatographic and spectral properties of the 2-mercurated products show the presence of an intramolecular N → Hg coordination via the five-membered ring in these molecules, which was further confirmed by the single-crystal structure analysis of 2-chloromercuro-1-[(4-methoxyphenylimino)methyl]ferrocene.     

Coating Carbon Nanotubes with Europium Oxide

Carbon nanotubes (CNTS) coating with europium oxide by a simple method is reported in this letter for the first time. The CNTS were refluxed in a solution of nitric acid containing europium nitrate, and the pH value was subsequently ajusted with ammonia solution. At last, the mixture was filtered and annealed. The TEM micrograph showed that the CNTS were covered with a uniform thin layer with thickness of about 15 nm. The XRD results revealed that the CNTS were coated with europium oxide.     

On the Criteria of Instability for Electrochemical Systems

Both cyclic-voltammetry-based and impedance-based experimental criteria that have been developed recently for the oscillatory electrochemical systems are critically appraised with two typical categories of oscillators.Consistent conclusions can be drawn by the two criteria for the category of oscillators that involve the coupling of charge transfer mainly with surface steps(e.g.ad-and desorption)such as in the electrooxidation of C1 organic molecules.Whereas,impedance-based criterion is not applicable to the category of oscillators that involve the coupling of charge transfer mainly with mass transfer(e.g.diffusion and convection) such as in the Fe(CN)6^3- reduction accompanying periodic hydrogen evolution.The reason is that the negative impedance cannot include the feedback information of convection mass transfer induced by the hydrogen evolution.However,both positive and negative nonlinear feedbacks,i.e., the diffusion-limited depletion and convection-enhanced replenishment of the Fe(CN)6^3- surface concentration,that coexist between the bistability,i.e.,Fe(CN)6^3- reduction with and without hydrogen evolution at lower and higher potential sides respectively,are all reflected in the crossed cyclic voltammogram(CCV).It can be concluded that the voltammetry-based criterion(in time domain)is more intuitive,less time-consuming and has a wider range of applications than the impedancebased one (in frequency domain).     

夸克随机组合机制与激发态重子的产生

从强子化过程的两个基本性质出发,在夸克随机组合框架上,得出了包括所有激发态在内的重子产生权重的一组基本关系．解释了“自旋抑制”和单态重子产额大的原因．最后,讨论了进一步确定激发态重子产生比例的条件和方法．     

傅里叶变换红外光谱和傅里叶变换拉曼光谱法无损鉴别药材的真伪

利用傅里叶变换红外（FT-IR）和近红外傅里叶变换拉曼（NIR FT-aman）光谱法对大黄（西宁大黄）与伪品大黄（华北大黄、山大黄、水根大黄）进行了无损快速的鉴别。结果表明：尽管正品大黄与伪品大黄差别较小，有大部分的化学成分有很大的相同之处，但在红外、拉曼谱图中各自的特征峰较突出，根据谱峰的强度和位置可容易地将它们区别开来。红外和拉曼光谱法相互印证，相互补充，具有快速、准确、操作简单、重复性好、不需对样品进行分离提取，可直接鉴别等特点。     

Amphiphilic miktoarm star copolymers can self-assemble into micelle-like aggregates in nonselective solvents: a case study of polyoxometalate based miktoarm stars

It is well-known that amphiphilic star-shaped copolymers can self-assemble in selective solvents to form complicated micellar constructs as a synergistic result of both the topological constraints and relative volume fractions of the arms. Although the association phenomena of amphiphilic stars have been observed in nonselective solvents, both the structural detail and formation mechanism of these associates are not clear yet. Moreover, these experimental observations are controversial with respect to molecularly dispersed starlike copolymers in nonselective solvents as is popularly believed. To clarify these issues, we have synthesized a series of polyoxometalate-based polystyrene-poly(ethylene glycol)(PS-PEG) miktoarm star supramolecular copolymers(SEW-1–5) by coupling a Keggin-type polyoxometalate of K_4[α-SiW_(12)O_(40)] with 1,2,3-triazolium bridged block copolymers of-PS_n-b~+-PEG_mI~-(n=17, 26, 39, 57, 81; m=45) through ionic exchange reactions, respectively. TEM imaging,contact angle and ~1H NMR studies reveal that SEW-2–5 self-assemble in chloroform, THF, and toluene to create micellelike aggregates ranging from cylinder to sphere with a PS corona and a PEG core, while for SEW-1, reverse bilayers are captured with a PEG corona and a PS core. Among these aggregates, the Keggin clusters of [α-SiW_(12)O_(40)]~(4-) localize at the core-corona interfaces between PS and PEG. In terms of solvent quality, chloroform, THF, and toluene are only slightly poorer for PEG than that for PS with a relative order of chloroformTHFtoluene. These unexpected aggregates originate from the topological constraints of the chemically different arms of PS and PEG in the miktoarm stars, where the weak incompatibility between the PS and PEG arms is intensified appropriately. The presence of the reverse bilayered structures of SEW-1 is due to the magnified steric hindrance of the PEG45 arm with decreasing the molecular weight of the PS17 arm. However, to the best of our knowledge,these are the first examples clearly indicating that miktoarm star copolymers can self-assemble in common good solvents or slightly selective solvents to generate micellelike aggregates. This scenario is not only in sharp contrast to the intuitively considered behavior of unimolecular miktoarm stars in nonselective solvents, but also rather different from the conventional selfassembly behavior of amphiphilic star copolymers in selective solvents.