Enhanced lithium electrochromism of atmospheric pressure plasma jet-synthesized tungsten/molybdenum oxide films for flexible electrochromic devices

Enhanced lithium electrochromic performances of mixed organo-tungsten oxide (W _x O _y C _z )/organo-molybdenum oxide (Mo _x O _y C _z ) films by a rapid codeposition onto 40 Ω/□ flexible polyethylene terephthalate/indium tin oxide substrates at a short exposed duration of 23 s using an atmospheric pressure plasma jet (APPJ) at various mixed concentrations of hexacarbonyl precursors [W(CO)₆ and Mo(CO)₆] are investigated. The flexible organo-tungsten–molybdenum oxide (WMo _x O _y C _z ) films demonstrated noteworthy electrochromic performance for 200 cycles of reversible Li⁺ ion intercalation and deintercalation in a 1 M LiClO₄–propylene carbonate electrolyte by the switching measurements of potential sweep from ?1 to 1 V at a scan rate of 50 mV/s and the potential step at ?1 and 1 V, even after being bent 360^o around a 2.5-cm diameter rod for 1,000 cycles. The optical modulation (ΔT) of 61.3 % for MoO _y C _z films at a wavelength of 795.6 nm was significantly improved up to 72.5 % for WMo _x O _y C _z films cosynthesized with an APPJ.     

Deprotection‐free preparation of propargyl ether‐containing phosphinated benzoxazine and the structure–property relationship of the resulting thermosets

Generally, protection and deprotection procedures of amino groups are required in preparing propargyl ether‐containing benzoxazines. In this study, we report a facile, deprotection‐free preparation of a propargyl ether‐containing phosphinated benzoxazine (2) from the nucleophilic substitution of a phenolic OH‐containing phosphinated benzoxazine (1) and propargyl bromide in the catalysis of potassium carbonate. The structure of (2) was characterized and confirmed by a high‐resolution mass spectrum, ¹H, ¹³C, ¹H‐¹H, ¹H‐¹³C nuclear magnetic resonance (NMR) spectra, and X‐ray single crystal diffractogram. infrared (IR) and differential scanning calorimetry were used to monitor the ring‐opening of benzoxazine and crosslinking of propargyl ether. The microstructure and the structure–property relationship of the resulting homopolymers and copolymers are discussed. The T_g of homopolymer of (2) is 208 °C by dynamic mechanical analysis, the coefficient of thermal expansion is 43 ppm/°C, and T_d 5% (N₂) is 393 °C, respectively, which are higher than those of the homopolymer of (1) . Similar trends were observed in the copolymerization system. The results demonstrate the beneficial effect of crosslinking afforded by the propargyl ether group is higher than that by the phenolic OH group. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Oliveridepsidones A–D,antioxidant depsidones from Garcinia oliveri

Four new prenylated depsidones, oliveridepsidones A–D, were isolated from the bark of Garcinia oliveri collected in Vietnam. Their structures were elucidated using mainly NMR techniques (¹H and ¹³C NMR, HMQC, HMBC and NOE experiments). Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and proton conductivity of sulfonated,multi‐phenylated poly(arylene ether)s

A series of sterically‐encumbered, sulfonated, poly(arylene ether) copolymers were synthesized and their proton conductivity examined. The series was prepared by copolymerizing a novel monomer, 2″,3″,5″,6″‐tetraphenyl‐[1,1′:4',1″:4″,1″':4″',1″″‐quinquephenyl]‐4,4″″‐diol, with 4,4'‐difluorobenzophenone and bisphenol A. Subsequent sulfonation and solution casting provided membranes possessing ion exchange capacities of 1.9 to 2.7 mmol/g and excellent mechanical properties (Young's modulus, 0.2–1.2 GPa; tensile strength, 35–70 MPa; elongation at break, 62–231%). Water uptake ranged from 34 to 98 wt% at 80 °C/100% RH. Proton conductivities ranged between 0.24 to 16 mS/cm at 80 °C/60% RH, and 3 to 167 mS/cm at 80 °C/95% RH. TEM analysis of the polymers, in the dehydrated state, revealed isolated spherical aggregates of ions, which presumably coalesce when hydrated to provide highly conductive pathways. The strategy of using highly‐encumbered polymer frameworks for the design of mechanically‐robust and dimensionally‐stable proton conducting membranes is demonstrated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2579‐2587     

Der Einsatz von Sorbentien räumlich-globulrer Struktur zur Abtrennung radioaktiver Verunreinigungen aus Wasser

Abstract

Possibilities of using a new generation of sorbents have been investigated. Polymers of spatial-globular (spherulitic) structure (RGS polymers) have been tested to separate Cs, Sr and rare earth elements – which can also be radioactive contaminants – from different waters.

RGS polymers are both, solids and highly-disperse systems being extremely permeable to fluids and gases with low pressure decline. They were currently used to clean industrial waste-water.

It is shown that these polymers can be used successfully to separate radionuclides. Polymers RGS-81 and RGS-112 have high distribution coefficients for CS, Sr, Sc, the lanthanide series and Hf in weakly acid solutions. In HF solutions, Sc and Hf can be separated from Cs, Sr and the lanthanides.     

High-power 2.8 W blue-violet laser diode for white light sources

High-power 2.8 W blue-violet InGaN LD was fabricated, applying AlN facet coating technology. The AlN was found to be crystallized on the facets and very stable even after 2200 h cw operation. Luminous flux over 380 lm is obtained with a phosphor-converted LD excitation white light source using just a single laser chip at 1A operating current.