缺陷单层和双层石墨烯的拉曼光谱及其激发光能量色散关系

拉曼光谱作为一种无破坏性、快速且敏锐的测试技术已经成 为表征石墨烯样品和研究其缺陷的最重要的实验手段之一. 本论文用离子注入在单层和双层石墨烯中产生缺陷, 并利用拉曼光谱研究了存在缺陷时单层和双层石墨烯的一阶和二阶拉曼模, 单层石墨烯的D模为双峰结构, 而双层石墨烯的D模具有四峰结构. 同时, 利用四条激光线系统地研究了本征和缺陷单层和双层石墨烯的拉曼峰频率的激发光能量依赖关系, 并基于石墨材料的双共振拉曼散射机理指认了离子注入后样品各拉曼峰的物理根源. 关键词： 石墨烯 缺陷 拉曼光谱 能量色散关系     

磁控溅射制备W掺杂VO2/FTO复合薄膜及其性能分析

为了获得相变温度低且热致变色性能优越的光学材料, 室温下在F:SnO₂ (FTO)导电玻璃基板表面沉积钨钒金属膜, 再经空气气氛下的热氧化处理, 制备了W掺杂VO₂/FTO复合薄膜, 利用X射线光电子能谱、X射线衍射和扫描电镜对薄膜的结构和表面形貌进行了分析. 结果表明: 高温热氧化处理过程中没有生成W, F, V混合氧化物, W以替换V原子的方式掺杂. 与采用相同工艺和条件制备的纯VO₂/FTO复合薄膜相比, W掺杂VO₂薄膜没有改变晶面取向, 仍具有(110)晶面择优取向, 相变温度下降到35 ℃左右, 热滞回线收窄到4 ℃, 高低温下的近红外光透过率变化量提高到28%. 薄膜的结晶程度明显提高, 表面变得平滑致密, 具有很好的一致性, 对光电薄膜器件的设计开发和工业化生产具有重要意义. 关键词： W掺杂 2')" href="#">VO₂ FTO导电玻璃 磁控溅射     

正交多载波M元循环移位键控扩频水声通信

针对水声扩频通信中频带利用率低的问题, 提出了一种M元扩频技术和循环移位键控(CSK)技术相结合的多载波调制方式, 将M元扩频后选择的扩频码同时采用CSK调制, 并调制在多个正交的载波上, 显著提高了频带利用率. 在水声多途信道下, 采用相同的通信速率和带宽, m序列、Kasami小集合序列和Gold序列为扩频码时, 比较了系统的误码性能. 仿真结果和实验结果均表明, m序列为扩频码时性能最优, Gold序列性能最差. 由于m序列数量有限, 为了进一步提高通信速率, 并使其他序列的性能接近m序列性能, 提出了一种复合序列抑制载波间干扰的算法, 该算法能够很好抑制多途干扰, 使复合序列性能接近m序列的性能. 关键词： M元扩频')" href="#">M元扩频 循环移位键控 正交多载波 载波间干扰     

Dihydrogen bond in C2H4− n Cl n ··· NaH (n = 0, 1, 2, 3) complexes: ab initio,AIM and NBO studies

The dihydrogen-bonded complexes of ethylene and its chlorine derivatives with sodium hydride have been systematically investigated at the MP2/6-311++G(d,p) level. The studied complexes are divided into three groups (including Linear, Five- and Six-membered cyclic structures) based on the optimized structures. The structural, energetic and topological parameters are presented and analysed in terms of their possible correlation with the interaction energies and the intermolecular H?···?H distances. The nature of the electrostatic interaction in this type of dihydrogen bond has also been unveiled by means of atoms in molecules (AIM) and natural bond orbital (NBO) analysis. The effect of ring structure on the dihydrogen bonding systems has been considered by comparing with the corresponding linear structure. NBO analysis suggests that the electron density transfer (EDT) in cyclic structures have dual-channel character.     

Theoretical study of stabilities,electronic, and catalytic performance of supported platinum on modified graphene

The geometry, electronic structure, and catalytic properties for CO oxidation of Pt atom supported on pri-graphene (PG), Haeckelite (H), and Stone–Wales-defect-graphene are investigated by density functional theory (DFT) calculations. In contrast to a Pt atom on PG, defective graphene, especially the Haeckelite, strongly stabilises the Pt atom and makes it more positive and thus the CO poisoning. At the same time the catalytic activities are as high as the pristine one. Langmuir–Hinshelwood mechanisms are favoured as the starting state and are followed by the Eley–Rideal reaction. The results indicate the benefit of Haeckelite as a substrate for the Pt atom and validate the reactivity of catalysts on the atomic scale with low cost and high activity.     

High resolution dynamic cardiac MRI using partial separability of spatiotemporal signals with a novel sampling scheme

The partial separability (PS) of spatiotemporal signals has been exploited to accelerate dynamic cardiac MRI by sampling two datasets (training and imaging datasets) without breath-holding or ECG triggering. According to the theory of partially separable functions, the wider the range of spatial frequency components covered by the training dataset, the more accurate the temporal constraint imposed by the PS model. Therefore, it is necessary to develop a new sampling scheme for the PS model in order to cover a wider range of spatial frequency components. In this paper, we propose the use of radial sampling trajectories for collecting the training dataset and Cartesian sampling trajectories for collecting the imaging dataset. In vivo high resolution cardiac MRI experiments demonstrate that the proposed data sampling scheme can significantly improve the image quality. The image quality using the PS model with the proposed sampling scheme is comparable to that of a commercial method using retrospective cardiac gating and breath-holding. The success of this study demonstrates great potential for high-quality, high resolution dynamic cardiac MRI without ECG gating or breath-holding through use of the PS model and the novel data sampling scheme.     

TiO2 Nanotube Array/Monolayer Graphene Film Schottky Junction Ultraviolet Light Photodetectors

Schottky junctions made from a titanium dioxide nanotube (TiO₂NT) array in contact with a monolayer graphene (MLG) film are fabricated and utilized for UV light detection. The TiO₂NT array is synthesized by the anodization and the MLG through a simple chemical vapor deposition process. Photoconductive analysis shows that the fabricated Schottky junction photodetector (PD) is sensitive to UV light illumination with good stability and reproducibility. The corresponding responsivity (R), photoconductive gain (G), and detectivity (D*) are calculated to be 15 A W^?1, 51, and 1.5 × 10¹² cm Hz^1/2 W^?1, respectively. It is observed that the fabricated PD exhibits spectral sensitivity and a simple power‐law dependence on light intensity. Moreover, the height of the Schottky junction diode is derived to be 0.59 V by using a low temperature I–V measurement. Finally, the working mechanism of the TiO₂NT array/MLG film Schottky junction PD is elucidated.     

一种混沌映射的相空间去噪方法

对于混沌映射来说,它们的频谱比混沌流的频谱更广阔,与噪声频谱的重叠率更高,所以混沌流的去噪方法对它们并不适用. 在半盲分析法的框架下,混沌系统的参数估计问题终将归结为最小二乘估计问题. 本文从最小二乘拟合的角度出发估计混沌映射的演化参数,进而通过相空间重构以及投影操作,实现对观测信号的噪声抑制. 实验结果表明,该算法的去噪效果优于扩展卡尔曼滤波器（extended Kalman filter,EKF）和无先导卡尔曼滤波器（unscneted Kalman filter,UKF）,并且能够较大程度地将信号源的混沌特征量还原. 关键词： 混沌 噪声抑制 相空间重构 投影     

线性电介质和中心对称光折变晶体界面表面波的研究

报道了中心对称光折变晶体与线性电介质界面表面波的形成及能量变化. 通过调节传播常数和波导参数的方法,可以得到非局域、振荡、局域三种类型的表面波. 波导参数和传播常数之差大于阈值时,线性电介质和中心对称光折变晶体界面可以形成局域表面波. 波导参数为正值时,局域表面波主要聚集在中心对称光折变晶体内,随着传播常数的增大,波能量随之单调递增,表面波可以稳定传播. 在给定的条件下,调节决定非线性作用强度的可变参量可以控制局域表面波模的阶数和传播波形. 关键词： 非线性光学 中心对称光折变晶体 表面波     

Nonisothermal Crystallization Behavior of Polypropylene Grafted Silane and Styrene Using γ-Ray Irradiation

Polypropylene grafted silane and styrene (named PP-g-Si/St in this article) was successfully prepared by radical graft polymerization initiated by γ-ray irradiation. The influence of total absorbed dose on the graft ratio of vinyltrimethoxysilane onto PP and the melt flow rate (MFR) of the PP-g-Si/St product were studied. The effect of graft ratios of vinyltrimethoxysilane on the melting point and nonisothermal crystallization kinetics of PP-g-Si/St was investigated by the method of differential scanning calorimetry (DSC). With increasing vinyltrimethoxysilane and styrene (used as viscosity modifier and free radical source) grafted on PP, the melting point of PP-g-Si/St became lower. Several different analysis methods, including those of Avrami, Jeziorny, and Mo and colleagues, were employed to describe the nonisothermal crystallization process of the grafted samples. The results indicate that the peak temperature of crystallization of PP-g-Si/St sample was lower than that of virgin PP. Crystallization kinetics revealed that the rates of nucleation and growth were affected differently by the graft ratio of vinyltrimethoxysilane onto PP. The activation energy was calculated on the basis of the method of Kissinger, and the values were 253.6 and 215.7 kJ/mol for virgin PP and PP-g-Si/St, respectively.