Controllable self-assembly of parallel gold nanorod clusters by DNA origami

We demonstrate the self-assembly of three types of parallel gold nanorod clusters using a rod-like DNA origami as the template.     

Facile cyclic ammonium salt with the smallest size for high performance electric double layer capacitors

A novel cyclic ammonium salt, N,N-dimethylpyrrolidinium tetrafluoroborate (P₁₁-BF₄), was successfully synthesized for the first time. The smallest cyclic structure of P₁₁-BF₄ induced high solubility and conductivity in PC, which can easier enter the micropores of activated carbon and occupy more surface area during charge/discharge process.     

Generation and Reactivity of a One-Electron-Oxidized Manganese(V) Imido Complex with a Tetraamido Macrocyclic Ligand

The synthesis and X-ray structure of a new manganese(V) mesitylimido complex with a tetraamido macrocyclic ligand (TAML), [Mn^V(TAML)(N-Mes)]⁻ ( 1 ), are reported. Compound 1 is oxidized by [(p-BrC₆H₄)₃N ]^+.[SbCl₆]⁻ and the resulting Mn^VI species readily undergoes H-atom transfer and nitrene transfer reactions.     

Effects of chain extender and uniaxial stretching on the properties of PLA/PPC/mica composites

Poly(lactic acid) (PLA)/poly(propylene carbonate) (PPC)/mica composites with different amount of chain extender (CE) were melt compounded and then processed via two routes (compression molding and uniaxial stretching) into sheets and films. The tensile, thermal, and oxygen barrier properties of all the samples were investigated. Tensile test showed that the tensile strength and elongation at break of all films were much higher than that of all sheets, especially for PLA/PPC/mica with 0.9‐wt% CE composite (CM₃(CE)_0.9) film. The crystallinity of all films increased significantly after uniaxial stretching of sheet samples. The Fourier transform infrared spectroscopy (FTIR) results proved the chemical reactions occurred between PLA/PPC and CE. Scanning electron microscope (SEM) analysis revealed that compatibility and interfacial adhesion of all samples were improved after adding mica and CE, and they were further enhanced after uniaxial stretching. The addition of CE was not favorable to improve the oxygen barrier performance of PLA/PPC/mica sheet samples. However, the oxygen barrier performance of film samples was significantly improved after uniaxial stretching. In particular, the CM₃(CE)_0.9 film had the lowest oxygen permeability coefficient (1.4 × 10^?15 cm³·cm/(cm²·s·Pa)), and this was the best oxygen barrier properties reported in the literature for PLA‐based composites, which was comparable with PA film. This study demonstrated the high efficiency of uniaxial stretching on improvement of properties of composites, which would promote the application of biodegradable polymers in oxygen sensitive food packaging.     

Simultaneous quantitation of 23 bioactive compounds in Tanreqing capsule by high‐performance liquid chromatography electrospray ionization tandem mass spectrometry

Tanreqing capsule (TRQC) is a formulation frequently used in traditional Chinese medicine to treat pyrexia, cough, expectoration and pharyngalgia. Since the pharmacological action of traditional Chinese medicines is closely related to their complex and diverse constituents, understanding the exact composition of TRQC is important to elucidate its clinical effectiveness and mechanism of action as well as to establish quality control methods and resolve safety issues. Herein, we employed high‐performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry for the simultaneous quantitation of 23 bioactive compounds in five batches of TRQC; the analytes could be categorized into five types: organic acids (seven compounds), flavonoids (10 compounds), iridoids (two compounds), phenylethanoid glycosides (two compounds) and bile acids (two compounds). The calibration curves for all analytes showed good linearity (r > 0.9953), and the inter‐ and intra‐day precisions did not exceed 4.94 and 4.97%, respectively. The recoveries varied from 90.47% to 109.80%; the corresponding relative standard deviations (RSDs) did not exceed 4.94%; and the repeatability (RSD < 4.72%) and stability (RSD < 4.88%) were also within acceptable limits. Thus, this study can be viewed as a fundamental reference for setting comprehensive TRQC quality standards.     

Screening potential antagonists of epidermal growth factor receptor from Marsdenia tenacissima via cell membrane chromatography model assisted by HPLC–ESI–IT–TOF–MS

Marsdenia tenacissima, or Tongguanteng in Chinese, is a traditional Chinese herb and has a broad application in clinical practice for its pharmacological effects of treating asthma, pneumonia, tonsillitis, pharyngitis tumors, etc. However, few studies have reported the screening of the active components of this medicine for tumor therapy. In this work, a two‐dimensional analytical system was developed to screen antagonists of epidermal growth factor receptor (EGFR) from M. tenacissima. A fraction was retained on the EGFR cell membrane chromatography (CMC) column, separated and identified as tenacissoside G (TG), tenacissoside H (TH) and tenacissoside I (TI) by two‐dimensional HPLC–IT–TOF–MS. Molecular docking and 3‐(4,5‐dimethyl‐2‐thiazolyl)‐2,5‐diphenyl‐2‐H‐tetrazolium bromide (MTT) assay were carried out to assess the activity of TS (including TG, TH and TI). Molecular docking results showed that the binding mode of TS on EGFR is similar to that of gefitinib. The MTT assay demonstrated that gefitinib and TS (especially TI) could inhibit the growth of EGFR highly expressed cell lines in a dose‐dependent manner in the range of 5–50 μmol/L. In conclusion, the two‐dimensional EGFR/CMC–HPLC–IT–TOF–MS system could be a useful approach in drug discovery from traditional Chinese medicines for searching for potential antitumor candidates.     

Crystal structure and pale‐yellow emitting properties of K3Gd1–xDyxB6O12 solid solutions

A new potassium dysprosium polyborate, K₃DyB₆O₁₂, has been prepared via the high‐temperature molten salt method and structurally characterized by single‐crystal X‐ray diffraction analysis. The structure can be described as a three‐dimensional framework composed of isolated bicyclic [B₅O₁₀]^5? groups and Dy³⁺ and K⁺ ions. The Fourier transform IR (FT–IR) and ultraviolet–visible (UV–Vis) spectra were investigated. A series of K₃Gd_1–xDy_xB₆O₁₂ phosphors was prepared and their photoluminescence properties were studied. The K₃Gd_1–xDy_xB₆O₁₂ phosphors exhibit a strong yellow emission band at 577 nm (the ⁴F_9/2→⁶H_13/2 transition of Dy³⁺) under UV excitation of 275 nm (the ⁸S_7/2→⁶I_J transition of Gd³⁺), suggesting the occurrence of the energy transfer Gd³⁺→Dy³⁺. The optimized doping concentration of the Dy³⁺ ion was 8 mol%. We may expect that K₃Gd_1–xDy_xB₆O₁₂ is a promising pale‐yellow emission phosphor for visual displays or solid‐state lighting.     

Full Dissolution of the Whole Lithium Sulfide Family (Li2S8 to Li2S) in a Safe Eutectic Solvent for Rechargeable Lithium–Sulfur Batteries

The lithium–sulfur battery is an attractive option for next‐generation energy storage owing to its much higher theoretical energy density than state‐of‐the‐art lithium‐ion batteries. However, the massive volume changes of the sulfur cathode and the uncontrollable deposition of Li₂S₂/Li₂S significantly deteriorate cycling life and increase voltage polarization. To address these challenges, we develop an ?‐caprolactam/acetamide based eutectic‐solvent electrolyte, which can dissolve all lithium polysulfides and lithium sulfide (Li₂S₈–Li₂S). With this new electrolyte, high specific capacity (1360 mAh g^?1) and reasonable cycling stability are achieved. Moreover, in contrast to conventional ether electrolyte with a low flash point (ca. 2 °C), such low‐cost eutectic‐solvent‐based electrolyte is difficult to ignite, and thus can dramatically enhance battery safety. This research provides a new approach to improving lithium–sulfur batteries in aspects of both safety and performance.     

Light‐Driven Reversible Intermolecular Proton Transfer at Single‐Molecule Junctions

Photoresponsive molecular systems are essential for molecular optoelectronic devices, but most molecular building blocks are non‐photoresponsive. Employed here is a photoinduced proton transfer (PIPT) strategy to control charge transport through single‐molecule azulene junctions with visible light under ambient conditions, which leads to a reversible and controllable photoresponsive molecular device based on non‐photoresponsive molecules and a photoacid. Also demonstrated is the application of PIPT in two single‐molecule AND gate and OR gate devices with electrical signal as outputs.     

The siRNAsome: A Cation‐Free and Versatile Nanostructure for siRNA and Drug Co‐delivery

Nanoparticles show great potential for drug delivery. However, suitable nanostructures capable of loading a range of drugs together with the co‐delivery of siRNAs, which avoid the problem of cation‐associated cytotoxicity, are lacking. Herein, we report an small interfering RNA (siRNA)‐based vesicle (siRNAsome), which consists of a hydrophilic siRNA shell, a thermal‐ and intracellular‐reduction‐sensitive hydrophobic median layer, and an empty aqueous interior that meets this need. The siRNAsome can serve as a versatile nanostructure to load drug agents with divergent chemical properties, therapeutic proteins as well as co‐delivering immobilized siRNAs without transfection agents. Importantly, the inherent thermal/reduction‐responsiveness enables controlled drug loading and release. When siRNAsomes are loaded with the hydrophilic drug doxorubicin hydrochloride and anti‐P‐glycoprotein siRNA, synergistic therapeutic activity is achieved in multidrug resistant cancer cells and a tumor model.