A New Strategy to Identify and Eliminate the Inner Filter Effects by Outer Filter Technique

To identify and eliminate the inner filter effects (IFEs), prepositive and side cells containing absorbents are fixed beside the fluorescer contained cell. In this way, excitation and emission lights can be quenched by primary and secondary outer filter effects respectively, depending on absorbent concentration and cell length. Herein the quenching of emission fluorescence caused by IFEs can be equally reduced by outer filter effects (OFEs) and the interference of IFEs was eliminated. This approach was experimentally used for identifying the interaction mode and mechanism between BSA and nanoAg. Results showed that the quenching of BSA fluorescence and synchronous fluorescence mainly attributes to IFEs, instead of static/dynamic fluorescent quenching. In view of the above, the elimination of the interference of IFEs by the design of OFEs plays an important part in the precise application of fluorescence detector.     

Maskless laser tailoring of conical pillar arrays for antireflective biomimetic surfaces

Herein, we report a facile approach for rapid and maskless production of subwavelength structured antireflective surfaces with high and broadband transmittance-direct laser interference ablation. The interfered laser beams were introduced into the surface of a bare optical substrate, where structured surfaces consisting of a micropillar array were produced by two-step laser irradiation in the time frame of seconds. A multiple exposure of the two-beam interference approach was proposed instead of multiple-beam interference to simply realize planar patterns of a high aspect ratio. Tall sinusoidal pillars were created and shaped by pulse shot number control. As an example of the application, zinc sulfide substrates were processed with the technology, from which high transmission at an infrared wavelength, over 92%, at normal incidence was experimentally achieved.     

Cu-In-O composite thin films deposited by reactive DC magnetron sputtering

Cu-In-O composite thin films were deposited by reactive DC magnetron sputtering at room temperature. The samples were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), UV/vis spectrophotometer, four-probe measurement and Seebeck effect measurement, etc. The samples contain Cu, In and O. The ratios of Cu to In and O to In increase with increase in O₂ flow rates. The ratio of Cu to In is over 1 and this suggests that Cu is in excess. The obtained Cu-In-O thin films are very possibly made of rhombohedral In₂O₃ and monoclinic CuO. Transmittance of the films decreases with increase in O₂ flow rate. The decrease in transmittance results from increase in Cu content in the films. The optical band gap of all the samples is estimated to be 4.1-4.4 eV, which is larger than those of In₂O₃ and CuO. The sheet resistance of the films decreases with increase in O₂ flow rate. Conductivity of the films is a little low, due to the addition of Cu and the poor crystalline quality of the film. The conduction behavior of the films is similar to that of In₂O₃ and the conduction mechanism of Cu-In-O thin films is through O vacancy.     

Above-threshold detachment of negative ions by circularly polarized few-cycle laser fields

In accordance with nonperturbative quantum scattering theory,we investigate photoelectron angular distributions(PADs) from above-threshold detachment(ATD) of negative ions irradiated by circularly polarized few-cycle laser fields.Electrons ejected on the polarization plane demonstrate distinct anisotropies in angular distributions which distinctly vary with the carrier-envelope(CE) phase.The anisotropy is caused by interference between transition channels;it also depends strongly on laser frequency,pulse duration,and kinetic energy of photoelectrons.Optimal emission of photoelectrons,which varies with CE phase,makes it possible to control photoelectron motion.     

Passive picosecond and femtosecond mode-locking laser action of Yb<Superscript>3+</Superscript>:LuYSiO<Subscript>5</Subscript>

Efficient passive mode locking of a diode-pumped Yb³⁺:LuYSiO₅ (Yb:LYSO) laser is first demonstrated in experiment using a semiconductor saturable absorber mirror (SESAM), to the best of our knowledge. A stable pulse train with a repetition rate of 101 MHz is generated. The average output power of 2.13 W and the pulse duration of 3.9 ps. With a pair of SF10 uncoated prisms for dispersion compensation, we obtained pulses as short as 780 fs with center wavelength around 1042 nm, the average output power of 1.03 W and the peak power of 13.1 kW.     

Cooling of a <Emphasis Type="Italic">Λ</Emphasis>-type three-level atom in a high-finesse optical cavity

A theoretical study is carried out for the cavity cooling of a Λ-type three-level atom in a high-finesse optical cavity driven by a weakly field. Analytical expressions for the friction, diffusion coefficients and the equilibrium temperature are obtained by using the Heisenberg equations, then they are calculated numerically and shown graphically as functions of the controlling parameters. For a suitable choice of these parameters, the dynamics of the cavity field interaction with the Λ-type three-level atom introduces a sisyphus cooling mechanism yielding lower temperature than the one of the two-level atom, avoiding the problems induced by spontaneous emission.     

改性乙醇胺富集烟道气中CO2的FTIR研究

以四(3,5-二叔丁基-4-羟基苯基丙酸)季戊四醇酯(抗氧剂1010)、Na2SO3作为乙醇胺(MEA)的氧化降解的改性剂,考察改性MEA富集模拟烟道气中CO2的效果,利用气相色谱、红外光谱分析抗氧剂1010与Na2SO3的适宜用量、比较两种抗氧剂的抗氧化性能.结果表明,抗氧剂1010和亚硫酸钠的添加量在0.15%时效...     

Morphological and ultrastructural characterization of the alimentary canal in Japanese wax scale (Ceroplastes japonicus Green)

The morphology and ultrastructure of the alimentary canal in the adult female of the Japanese wax scale, Ceroplastes japonicus Green (Hemiptera: Coccoidea: Coccidae), was investigated using light microscopy, scanning electron microscopy and transmission electron microscopy. The results showed that the foregut was subdivided into a sclerotized pharynx and an oesophagus. A pair of salivary glands attached in the middle of the foregut. The loop-shaped midgut was narrow and longer than the foregut and its inner wall lined with a thick layer of epithelia. The hindgut was divided into a narrower ileum and a broader rectum, with the well-developed filter chamber enclosed in the anterior rectum. Malpighian tubules consisted of two brownish-yellow moniliform tubules with pores, approximately 1 μm in diameter, scattered on the outer surface and many spherical crystals inside the tubules.     

Dark soliton in one-dimensional Bose–Einstein condensate under a periodic perturbation of trap

The perturbation of a confining trap leads to the collective oscillation of a Bose--Einstein condensate, thereby the propagation of a dark soliton in the condensate is affected. In this study, periodic perturbation is employed to match the soliton oscillation. We find that the soliton dynamics depends sensitively on the coupling between the moving direction of the trap and that of the soliton. The soliton energy/depth evolves periodically, and a relevant shift in the soliton trajectory occurs as compared with the unperturbed case. Overall, the soliton oscillation frequency changes little even if the perturbation amplitude and frequency vary.     

Diffraction of an ultrashort pulsed beam with arbitrary polarization state from a volume holographic grating in LiNbO3 crystals

Based on a modified coupled wave theory of Kogelnik, we have studied the diffraction of an ultrashort pulsed beam with an arbitrary polarization state from a volume holographic grating in photorefractive LiNbO₃ crystals. The results indicate that the diffracted intensity distributions in the spectral and temporal domains and the diffraction efficiency of the grating are both changed by the polarization state and spectral bandwidth of the input pulsed beam. A method is given of choosing the grating parameters and input conditions to obtain a large variation range of the spectral bandwidth of the diffracted pulsed beam with an appropriate diffraction efficiency. Our study presents a possibility of using a volume holographic grating recorded in anisotropic materials to shape a broadband ultrashort pulsed beam by modulating its polarization state.