一种蓝色聚合物激光材料

聚合物作为一种有机发光材料,由于在平板显示和光电子器件中的良好应用前景而受到广泛研究［１～２］．近年来,一个重要进展是在聚合物中观测到了受激发射（简称Ｐｏｌｙ－ｍｅｒ激光）现象［３～６］．Ｐｏｌｙｍｅｒ激光最早是在溶液中实现的［３～４］．作为一种新型...     

象面全息无损检测的实验研究

本文对象面全息无损检测方法进行了实验研究,结果表明该方法可用白光再现;同时,对于小缺陷可进行放大成象,从而提高了对小缺陷的判别精度。     

Structural and electronic properties of cobalt carbide Co2C and its surface stability: Density functional theory study

Density functional theory calculations have been performed to investigate the structural and electronic properties of bulk Co₂C and the stability of low index Co₂C surfaces. We found that the formation of Co₂C is exothermic with the formation energy of ? 0.81 eV/Co₂C with respect to Co under the presence of syngas (mixture of CO and H₂). While formed Co₂C can be decomposed further to metal Co and graphite carbon with modest energy gain of 0.37 eV/Co₂C. This suggests that Co₂C is only metastable in Fischer–Tropsch synthesis, which agrees well with experimental findings. The density of states (DOSs) reveals that the Co₂C is paramagnetic and strong metallic-like. The difference of charge density analysis indicates that the bond of Co₂C is of the mixtures of metallic, covalent, and ionic properties. A variety of low index Co₂C surfaces with different terminations are studied. We find that the surface energy of low index stoichiometric Co₂C highly relies on the surface area, the number of coordination of surface atoms and the surface dipole, with the decreased stability order of (101) > (011) > (010) > (110) > (100) > (001) = (111). Our results indicate that under Co-poor condition, the formation of non ? stoichiometric surface (011) and (111) without terminated cobalt is energetically more favorable, while under Co-rich condition the formation of non ? stoichiometric (111) surface with cobalt overlayer are preferential.     

铬、钕双掺钆镓石榴石(Cr4+,Nd3+):Gd3 Ga5 O12激光晶体光学性能的研究

用提拉法生长了掺铬、钕的钆镓石榴石(Cr^4 ,Nd^3 ：GGG)自调Q激光品体。报道了室温下的吸收光谱和荧光光谱特性。分析了Cr离子浓度对光谱性质的影响。比较了Cr^4 ：GGG,Nd^3 ：GGG和(Cr^4 ,Nd^3 )：GGG晶体吸收光谱的关系。测量了(Cr^4 ,Nd^3 )：GGG晶体和Nd^3 ：GGG晶体的荧光寿命,它们分别是33μs和250μs。实验表明,(Cr^4 ,Nd^3 )：GGG晶体是一种非常有潜力的自调Q激光晶体,可以实现大功率激光器的小型化和全固态化。     

光谱成像技术无损鉴别西洋参饮片的研究

应用电可控液晶光谱成像装置,测定不同市售来源的西洋参饮片,以期为其质量控制提供新的方法。系统光谱分辨率5nm,光谱覆盖范围为405～680nm,空间分辨率50lp·mm-1。从成像光谱立方体中提取特征光谱曲线,构建饮片指纹图谱;采用主成分等聚类分析方法解析其指纹图谱,用于饮片真伪鉴别与质量判定。结果与性状,显微及理化鉴定结果相吻合。表明光谱成像分析技术可用于中药指纹图谱的构建和质量评价,操作方法简便、快速、无损。     

全光纤光子集成器件及系统

本对全光纤光子集成器件与系统进行了较为全面地综述,结合我们的工作,对目前的研究热点：光纤光栅,光纤激光器,光纤放大器,光纤光栅分插器与传感器等诸多光子器件以及由这些器件组成的波分复用通信系统进行了介绍和评述,一些新成果和新进展表明,这些光子器件与系统在当今和未来的光通信中将发挥重要作用。     

Dual-wavelength distributed Bragg reflector semiconductor laser based on a composite resonant cavity

We report a monolithic integrated dual-wavelength laser diode based on a distributed Bragg reflector (DBR) composite resonant cavity. The device consists of three sections, a DBR grating section, a passive phase section, and an active gain section. The gain section facet is cleaved to work as a laser cavity mirror. The other laser mirror is the DBR grating, which also functions as a wavelength filter and can control the number of wavelengths involved in the laser action. The reflection bandwidth of the DBR grating is fabricated to have an appropriate value to make the device work at the dual-wavelength lasing state. We adopt the quantum well intermixing (QWI) technique to provide low-absorption loss grating and passive phase section in the fabrication process. By tuning the injection currents on the DBR and the gain sections, the device can generate 0.596 nm-spaced dual-wavelength lasing at room temperature.     

基于低相干光的阵列透镜束匀滑技术研究

基于激光加载的材料状态方程的实验研究对靶面光强分布的均匀性及稳定性提出了极高的要求,靶面光强的上述两大特性在很大程度上决定了实验结果的精度和可重复性.本文针对传统窄带高相干激光装置在激光加载材料状态方程实验中表现出的靶面光强均匀性和光强分布稳定性两方面可能存在的问题,提出了基于宽带低相干激光,利用消衍射阵列透镜联合诱导非相干技术的束匀滑方案,并重点分析了波前相位畸变对靶面不均匀性及稳定性的影响.模拟结果表明,该方法明显降低了靶面不均匀性,提高了对波前相位畸变的包容度,获得了均匀、稳定的光强分布.统计分析显示,焦斑强度分布极差和不均匀性与波前相位畸变均方根梯度相关性较强.因此,可以根据统计结果以及实验对焦斑强度分布的要求,给出波前相位畸变的容差范围,对状态方程实验中激光驱动器参数的设计与优化具有指导意义.     

Novel delay-distribution-dependent stability analysis for continuous-time recurrent neural networks with stochastic delay

<正>In this paper,the problem of delay-distribution-dependent stability is investigated for continuous-time recurrent neural networks(CRNNs) with stochastic delay.Different from the common assumptions on time delays,it is assumed that the probability distribution of the delay taking values in some intervals is known a priori.By making full use of the information concerning the probability distribution of the delay and by using a tighter bounding technique(the reciprocally convex combination method),less conservative asymptotic mean-square stable sufficient conditions are derived in terms of linear matrix inequalities(LMIs).Two numerical examples show that our results are better than the existing ones.     

129I加速器质谱分析研究

通过对129I加速器质谱(AMS)分析中影响敏度和准确度各种参数的研究,如靶电极制备、压样、靶样中辅助介质（Matrix）的选择及使用比例等,优化了用于3 MV加速器质谱仪的SO-110型离子源的条件参数,确定129I-AMS测量的最佳靶电极材料为Cu,最佳的辅助介质为Nb粉末,Nb与AgI样品的最佳体积比为3∶1。在此条件下可以获得稳定且持续的I-束流进行测量129I/127I原子比值,实验测得西安加速器质谱仪的129I/127I本底值为1.5210-14。