一个新的杆状病毒凋亡抑制基因的克隆及鉴定

缺失功能性ｐ３５基因的苜蓿尺蠖核形多角体病毒（ＡｃＮＰＶ）突变体（ｖΔＰ３５Ｋ／ｐｏｌ＋）感染草地夜蛾细胞（Ｓｆ９和Ｓｆ２１）［１］及海灰翅夜蛾细胞（ＳＬ２）［２］时，引起细胞凋亡，从而使病毒的感染流产．我们发现海灰翅夜蛾核形多角体病毒（ＳｌＮＰＶ）...     

闹羊花毒素Ⅲ400MHz二维 ~1H NMR的谱研究

闹羊花毒素Ⅲ的结构较为复杂,采用一维1~H NMR 技术难以对谱做明确的指定。本文通过结合使用400 MHz 1~H-1~H 偶合相关、远程增强型的 1~H-1~H 偶合相关和二维 NOE 技术,对标题化合物的1~H NMR 信号的归属问题作了研究,解决了除前人已明确指定的个别信号外的所有其余信号的鉴别和指定。并且,根据二维 NOE 的实验结果,对其相对构型作了证实。这些结果有助于此类化合物的结构和构型的测定。     

Improvement of least-squares finite difference method on simulating slider air bearings in head disk systems

Least-squares finite difference (LSFD) method, one of mesh-free methods, is used to solve slider air bearings problem through discritizing the generalized Reynolds equation into nonlinear systems of algebraic equations. Two approximation schemes for the linearization of these equations are presented and compared. And, some new techniques to search supporting points for the reference node in the mesh-free method were proposed and explored. Therefore, these improvements eliminate some potential limitation of the LSFD method previously published and further facilitate its employment in complex slider models. Advanced step slider as an example of negative pressure sliders is simulated and verified using the improved LSFD mesh-free method in head disk systems.     

Linear quivers and the geometric setting of quantum GLn

This paper presents a connection between the defining basis presented by Beilinson-Lusztig-MacPherson [1] in their geometric setting for quantum GL_n and the isomorphism classes of linear quiver representations. More precisely, the positive part of the basis in [1] identifies with the defining basis for the relevant Ringel-Hall algebra; hence, it is a PBW basis in the sense of quantum groups. This approach extends to q-Schur algebras, yielding a monomial basis property with respect to the Drinfeld-Jimbo type presentation for the positive (or negative) part of the q-Schur algebra. Finally, the paper establishes an explicit connection between the canonical basis for the positive part of quantum GL_n and the Kazhdan-Lusztig basis for q-Schur algebras.     

Development and applications of an on-line thermal neutron prompt-gamma element analysis system

This paper introduces the principles, instrumentation, implementation, and industrial applications of an on-line thermal neutron prompt-gamma element analysis system (using a²⁵²Cf neutron source, Am–Be neutron source, or neutron generator). The energy resolution of the system at the H prompt-gamma full-energy photopeak (2.22325 MeV) is 3.6 keV. The concentration measurement error of Al₂O₃, FeO₃, CaO, and SiO₂ is ±0.3%, ±0.1%, ±0.4%, and ±0.4%, respectively. The system has been tested on-site at both the Shandong and the Zhengzhou Aluminium Works. Our preliminary on-site measurements confirm that the stability, reliability, measurement range, and accuracy of the system can meet the requirements of the aluminium production process. Facilitation of this measurement at aluminium plants is expected to reduce plant costs by over 3 million dollars annually through reduced energy consumption, more rapid qualification of pulps being mixed during the production process, and in reduced labor costs.Other participants of Shandong and Zhenghou Aluminium Works are: Wang Aili, Zengshen, Dei Jianguo and Lu Jinnan, Wang Deyu, Jin Hequan.     

3族新的不含紧优与几乎紧优的有向双环网络无限族

给出了3族新的不含紧优与几乎紧优的有向双环网络.     

A uniqueness theorem for a free boundary problem

In this paper, we prove a uniqueness theorem for a free boundary problem which is given in the form of a variational inequality. This free boundary problem arises as the limit of an equation that serves as a basic model in population biology. Apart from the interest in the problem itself, the techniques used in this paper, which are based on the regularity theory of variational inequalities and of harmonic functions, are of independent interest, and may have other applications.

     

Beam Combination using Stimulated Brillouin Scattering for the Ultimate High Power-Energy Laser System Operating at High Repetition Rate over 10 Hz for Laser Fusion Driver

After the laser was invented in 1960, a phase conjugation mirror has been respected to be the most fantastic one for the laser resonator composition because it can compensate any distortions of the laser beams occurred by the many inhomogenuities of the laser media and optical components. Among the many phase conjugation configurations, the stimulated Brillouin scattering phase conjugation mirror is the most simple one and many researchers have tried to utilize it to develop high power/energy laser systems. For realizing a high energy/power laser system the thermal problem is the most difficult to solve, and some researchers suggested a beam combination technique to reduce the thermal load of the big laser media to many small sized ones. To accomplish the beam combination using stimulated Brillouin scattering phase conjugation mirrors (SBS-PCMs), it is necessary to lock/control the phases of the SBS-PCMs. And some researchers have developed several ways for it, but they can lock the phases of a limited number of beams overlapped at the foci less than 5, or lock the phases by back-seeding technique but it loses the phase conjugation characteristics. For realization of the laser fusion driver, it is necessary to combine more than 10 or 100 beams. And the authors have developed recently a new phase controlling/locking technique which is isolated and independent totally from other beams and it can be applied to an unlimited number of beams in principle.     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

A highly sensitive and rapid assay for protein determination in human urine and penicillin using a Rayleigh light-scattering technique with benzeneazo-8-acetylamino-1-naphthol-3,6-disulfonic acid sodium salt.

A simple and sensitive method was conducted for the determination of trace amounts of proteins with benzeneazo-8-acetylamino-1-naphthol-3,6-disulfonic acid sodium salt (azophloxine, AP) using a Rayleigh light-scattering (RLS) technique. At pH 2.60 and in the presence of an emulsifier OP microemulsion, the RLS of AP can be greatly enhanced by proteins, owing to the interaction between AP and protein. The enhanced intensity is proportional to the concentration of proteins. Four proteins, including bovine serum albumin (BSA), human serum albumin (HSA), lysozyme (Lys) and gamma globulin (gamma-G) have been tested. For example, the linear range of BSA was 0 - 0.06 microg mL(-1) with detection limits of 2.38 ng mL(-1). The method was applied to the analysis of protein in human urine and penicillin samples with satisfactory results. The relative standard deviation was in all instances less than 4.0%, and the recovery was in the range of 97.5 - 104%.