Controllable synthesis of CuS-P(AM-co-MAA) composite microspheres with patterned surface structures

Copper sulfide-poly(acrylamide-co-methacrylic acid) (CuS-P(AM-co-MAA)) composite microspheres with patterned surface structures have been synthesized in a controllable manner by means of the polymer microgel template method. The formation of CuS particles can be regulated by controlling the decomposition of thioacetamide (TAA) in acidic solution. Compared with the microgel template, the surface morphologies of the composite microspheres are characterized by compact and creased textures. The surface morphology of the composite microspheres has been found to be mainly influenced by the amount of copper sulfide precipitated and hence by the rate of H(2)S gas generation. This study might provide a potential route for controlling the synthesis of various metal sulfide-polymer composites with patterned surface structures.     

Preparation of CuS-P(NIPAM-co-MAA)Hybrid Microgels with Controlled Surface Structures

Copper sulfide‐poly(isopropylacrylamide‐co‐methacrylic acid) [CuS‐P(NIPAM‐co‐MAA)] hybrid microgels with patterned surface structures have been synthesized by means of the polymer microgel template technique. The results showed that the surface morphology of the hybrid microgels could be regulated by controlling the decomposition of thioacetamide (TAA) in an acidic medium. The rate of precipitation and the amount of metal sulfide significantly affect the surface structures of the hybrid microgels.     

Rhodium‐Catalyzed Directed Sulfenylation of Arene CH Bonds

The rhodium‐catalyzed intermolecular direct C?H thiolation of arenes with aryl and alkyl disulfides was developed for the first time to provide a convenient route to aryl thioethers. This strategy is compatible with many different directing groups and exhibits excellent functional group tolerance. More significantly, mono‐ or dithiolation can be selectively achieved, thus providing a straightforward way for selective preparation of aryl thioethers and dithioethers.     

Rhodium‐Catalyzed Direct Amination of Arenes with Nitrosobenzenes: A New Route to Diarylamines

A Rh^III‐catalyzed addition of aryl C?H bonds to nitrosobenzenes, followed by cleavage of the resulting hydroxylamines in situ, has been reported. Different directing groups, such as N‐based heterocycles and ketoximes, can be used in this C?H amination process, providing valuable diarylamines in excellent yields. Most importantly, this process provides a new method for attaching arylamine groups to aromatic rings.     

First total synthesis of tripdiolide

The first total synthesis of tripdiolide 1 from the readily available abietic acid 3 in 22 steps is described and this synthesis furnishes a 5.8% overall yield of 1 with an average yield of 87%.     

市电参数测量仪的设计

为了实现市电质量监测并降低测量成本,以STC12C5A60S2微处理器为控制核心,利用电压有效值转换芯片等器件,设计了一款市电参数测量仪,对频率、电压有效值及失真度进行测量;基于测周法实现50 Hz频率的测量,通过一块电压有效值转换芯片测量总电压有效值与谐波电压有效值,实现市电电压的测量,并通过计算获得失真度值;实验结果表明,该测量仪测量精度较高,频率测量误差小于0.1%,电压有效值测量误差控制在1%以内,失真度测量误差小于5%;该测量仪结构简单、性能稳定,可应用于电能质量监测系统。     

稀土区奇A核晕带存在从转动到振动形状演化的直接证据(英文)

原子核的形状演化效应是核结构研究的重要基础问题之一。通常认为,A=160质量区的奇A核位于大形变核区域,它们的激发态能谱将呈现出典型的转动激发特征。然而,基于E-GOS曲线方法,发现随着角动量的增加,该质量区奇A核的晕带具有显著地从转动激发演化成为振动激发的形状演化现象。此外,为深入理解原子核形状演化的微观机制,采用Total-Routhian-Surface（TRS）方法针对稀土区的奇A核进行了理论计算,结果表明,165Yb和157Dy同位素在低激发态时具有稳定的长椭形变,当角动量大于0.50 MeV后,核芯的四极形变显著减小并开始产生三轴形变。The phase transition of nuclei with increasing angular momentum (or spin) and excitation energy is one of the most fundamental topics of nuclear structure research. The odd-N nuclei with A ≈160 are widely considered belonging to the well-deformed region, and their excitation spectra are energetically favored to exhibit the rotational characteristics. In this work, however, the evidence suggesting that the nuclei changes from rotation to vibration along the yrast lines as a function of spin was found. The simple method, named as E-Gamma Over Spin (E-GOS) curves, would be used to discern the evolution from rotational to vibrational structure in nuclei for various spin ranges. Meanwhile, in order to understand the band structure properties of nuclei, theoretical calculations have been performed for the yrast bands of the odd-A rare-earth nuclei within the framework of the total routhian surface (TRS) model. The TRS plots predict that the 165Yb and 157Dy isotopes have large quadrupole shapes at low spin states. At higher rotational frequency (hω~ >0.50 MeV), a clear reduction of the quadrupole deformation is indicated by the present results, and the isotopes become rigid in the γ deformation.     

In离子掺杂二氧化钛纳米管可见光催化活性的研究

采用两步预掺杂方法制备出In离子掺杂二氧化钛纳米管可见光催化剂. 可见光催化降解对氯苯酚实验证明: 掺杂In离子量为3%的TiO2纳米管可见光活性最高, 是纯TiO2纳米管的2倍以上. X射线衍射(XRD), X光电子能谱(XPS)和表面光电压谱(SPS)结果表明: 当In离子掺杂浓度较小时, In离子取代晶格Ti的位置形成InxTi1－xO2取代式掺杂结构. In离子的掺杂能级与Ti离子的3d轨道形成混合价带, 使禁带宽度变窄, 增强了可见光响应. 随着In离子掺杂浓度的增加, 同时在InxTi1－xO2纳米管表面生成In2O3, 形成InxTi1－xO2/In2O3纳米管复合结构. 该复合结构有效地增加可见光响应, 促进了光生载流子的分离, 提高了光生载流子在固/液界面参加光催化反应的利用率, 使纳米管催化剂可见光催化活性显著提高.     

Binary Modification of Eucommia ulmoides Gum Toward Elastomer with Tunable Mechanical Properties and Good Compatibility

Eucommia ulmoides gum (EUG) was applied in blend rubber with a heavily limited amount because of its duality of rubber and plastic, and an efficient way of triazolinedione (TAD)‐based Alder‐ene reaction was used to improve the elastic properties of EUG. Binary modification of EUG with two TADs containing hexyl and polyhedral oligomeric silsesquioxane (POSS) groups were conducted to generate the modified EUG elastomers with tunable mechanical properties and good compatibility by varying TAD contents. When the low hexyl (1%) and POSS (0.2%) TADs incorporated, the modified EUGs displayed high tensile strength of 36.57 MPa with the elongation at break of 876%, and thus high toughness of 152.14 MJ m^?3. If high contents of hexyl (20%) and POSS (0.2%) TADs employed, the modified EUGs exhibited excellent elongation at break of 1165% and recovery rate of 60%, and especially its loss factor reached up to 0.83?0.65 at 20?70°C. Therefore, the modified EUGs containing the polar urazole and POSS groups should be a novel elastomer with good compatibility, wear resistance, and damping properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Determination of cnidilin and its two metabolites in rat bile and stool after oral administration by HPLC/electrospray ionization tandem mass spectrometry

A simple, fast and sensitive method for the simultaneous determination of cnidilin and its two metabolites (M1 and M2) in rat bile and stool using HPLC coupled with electrospray ionization tandem mass spectrometry (HPLC‐ESI‐MS/MS) has been developed. The sample pretreatment was simple, because methanol was the only additive used for dilution of bile and ultrasound of stool. Pimpinellin was used as internal standard (IS). The separation was performed on a reverse phase C₁₈ column with gradient elution consisting of 0.5‰ aqueous formic acid and methanol (containing 0.5‰ formic acid). The detection was in the multiple‐reaction monitoring mode within 7 min. All the analytes were in accordance with the requirement of the validation of the method in vivo (linearity, precision, accuracy, limit of detection and limit of quantification). After oral administrating 24 mg/kg of the prototype drug cnidilin, M1 and M2 were determined in bile within 36 h, and in stool within 60 h. Cnidilin in bile was completely excreted in 24 h, and the main excretive amount of cnidilin was 80% in the first 6 h, but the drug recovery in bile within 24 h was <1.95%. In stool, the main excretive amount of cnidilin was 95.8% in the first 24 h, and the drug recovery within 48 h was lower than 1.48%. Copyright © 2012 John Wiley & Sons, Ltd.