The minimum norm method for the determination of the charge density from elastic electron scattering data

Unphysical behavior in the QR algorithm based least squares determination of the expansion coefficients of the charge density obtained from limited information about the charge form factor occurs when the spread of the singular values in the matrix relating these quantities becomes too large. Setting the smallest singular values equal to zero in the singular value decomposition used in the minimum norm method yields a much more reasonable determination of the charge density. Increasing the size of the basis without increasing the range of the prior information about the charge form factor leads to ambiguities in the determination of the charge density. Numerical results in an analytic model are presented.     

氮掺杂手性碳纳米管的电子结构和输运特性的理论研究

运用第一性原理的密度泛函理论,结合非平衡格林函数,研究了氮原子取代掺杂手性单壁(6,3)碳纳米管的电子结构和输运特性.计算结果表明:不同构形和不同数目的氮原子取代掺杂对手性碳管的输运性质有很复杂的影响.研究发现,氮原子掺杂明显改变了碳管的电子结构,使金属型手性碳管的输运性能降低,电流-电压曲线呈非线性变化,而且输运性能随着杂质原子间间距的变化而发生显著改变.在一定条件下,金属型碳管向半导体型转变. 关键词： 手性单壁碳纳米管 氮掺杂 电子结构 输运性能     

含Stone-Wales缺陷zigzag型石墨烯纳米带的电学和光学性能研究

本文采用基于密度泛函理论的第一性原理对zigzag型石墨烯纳米带中含有不同Stone-Wales缺陷的电子结构特性和光学性能进行研究. 考虑了两种模型:不计电子自旋和考虑电子自旋的情况.研究发现:不计电子自旋情况下,含对称Stone-Wales缺陷的石墨烯纳米带在缺陷区域出现了凹凸不平的折皱构型,两种不同的Stone-Wales缺陷都引起了电荷的重新分布.考虑电子自旋时,Stone-Wales缺陷的引入对石墨烯纳米带自旋密度有显著影响,也引起了不同自旋的电子态密度的变化.进一步研究了纳米带的光学性能,发现 关键词： 石墨烯纳米带 Stone-Wales缺陷 电子结构 光学性能     

A bidirectional hybrid DWDM-PON employing optical injection locking technique and data comparators

A bidirectional hybrid dense-wavelength-division-multiplexing (DWDM)-passive optical network (PON) employing optical injection locking technique on vertical-cavity surface-emitting lasers (VCSELs) and data comparator, as well as optical injection locking technique on distributed feedback laser diodes (DFB LDs) and amplitude/phase compensator is proposed and demonstrated. Improved performances of bit error rate (BER) and carrier-to-noise ratio/composite second order/composite triple beat (CNR/CSO/CTB) were observed in our proposed bidirectional hybrid DWDM-PON. Bidirectional transmission in bidirectional hybrid DWDM-PON architecture is a very attractive option, the capacity of the optical network can be expanded relatively easily by bidirectional transmission technology.     

Exchange bias dependence on interface spin alignment in a Ni80Fe20/(Ni,Fe)O thin film

A Ni80Fe20/(Ni,Fe)O thin film exhibits a positive exchange bias when cooled in a zero field and a negative exchange bias when field cooled. With transmission electron microscopy and electron energy loss spectrometry, the composition and magnetic structure has been ascertained and a distribution of magnetization easy axes about the interface extrapolated. The results indicate that the positive exchange bias is from antiferromagnetic interface moments perpendicular to their ferromagnetic counterparts. With field cooling the alignment is put into a parallel configuration resulting in a negative exchange bias.     

Friction and forced convective heat transfer in a sintered porous channel with obstacle blocks

This work experimentally studies the flow characteristics and forced convective heat transfer in a sintered porous channel that filled with sintered copper beads of three average diameters ( 0.830, and 1.163 mm). The pressure drop and the local temperature measurements can be applied to figure out the distributions of the friction coefficient and the heat transfer coefficient. Three sintered porous channels differ in the arrangement of obstacle blocks. Model A has no obstacle. Models B and C have five obstacle blocks facing down and up, respectively, in a sintered porous channel. The range of experimental parameters, porosity, heat flux, and effect of forced convection are 0.370 ≤ ɛ ≤ 0.385, q=0.228, 0.872, 1.862 W/cm², and 200 ≤ Re _d ≤ 800. The permeability and inertia coefficient of each of the three sintered porous channels are analyzed. The results for Model A agree with those obtained by previous investigations in C _f distribution. The heat transfer of Model C exceeds that of Model A by approximately 20%. Finally, a series of empirical correlation equations were obtained for practical applications and engineering problems.     

含N-乙酰化肝素寡糖的制备及序列分析

建立了含N-乙酰化肝素寡糖的分离提纯及其序列结构分析方法.首先应用肝素酶Ⅰ深度酶解低分子量肝素来富集含N-乙酰化结构寡糖,通过Bio-Gel P10凝胶色谱法分离制备了包括二糖至十四糖的系列肝素寡糖粗样品,ProPac PA-1强阴离子高效液相色谱(SAX-HPLC)等方法对粗样品进一步分离,提纯得到4种六糖和3种八糖片段.其次应用肝素酶Ⅰ,Ⅱ和Ⅲ复合酶解与HPLC法分析各纯化寡糖的二糖组分,并结合肝素酶Ⅰ底物特异性,初步推断4种六糖和3种八糖的序列结构.在寡糖的糖链两端均含有N-硫酸化二糖,而N-乙酰化二糖分布在糖链当中.应用电喷雾离子阱-飞行时间质谱(ESI-IT-TOF-MS)在负离子模式下进一步表征寡糖并分析其裂解规律.结果表明,各寡糖中均出现大量因SO32-丢失形成的碎片离子峰,六糖中主要有双电荷和三电荷碎片离子峰;在八糖中出现了一系列从双电荷至五电荷的离子峰.各寡糖的双电荷离子峰质荷比进一步确定了上述寡糖的序列结构.六糖的裂解规律表明,裂解主要存在于糖苷键,N-乙酰葡糖胺和糖醛酸上的裂解方式分别为0,2X和0,2Z.本研究提供了切实有效的分离、分析未知结构肝素寡糖序列的新方法.     

B/N掺杂类直三角石墨烯纳米带器件引起的整流效应

基于密度泛函理论结合非平衡格林函数的方法, 研究了硼(氮)非对称掺杂类直三角石墨烯纳米带器件的电子输运性能. 计算结果表明: 单个硼或氮原子取代类直三角石墨烯纳米带顶点的碳原子后, 增强了体系的电导能力, 并且出现了新颖的整流效应. 分析表明: 这是由于硼氮掺杂类直三角石墨烯纳米带器件在正负偏压下分子能级的移动方向和前线分子轨道空间分布的不对称而产生的. 最重要的是, 当左右类直三角石墨烯纳米带的顶端原子同时被硼和氮掺杂后, 体系的整流效应显著增强, 而且出现负微分电阻效应.     

Study on tribological behaviors of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites via a d‐optimal mixture design

This study analyzed variations of tribological behaviors that depend on the injection molding techniques during the blending of short glass fiber (SGF) and polytetrafluoroethylene (PTFE) reinforced polycarbonate (PC) composites. The proposed planning of blending experiments is to use a D‐optimal mixture design (DMD). The tribological behaviors of friction coefficient and wear mass loss were selected for discussion. Nine experimental runs, based on a DMD method, utilized to train the back‐propagation neural network (BPNN) and then the simulated annealing algorithm (SAA) approach is applied to search for an optimal mixture ratio setting. In addition, the result of BPNN integrating SAA was also compared with response surface methodology (RSM) approach. The results of confirmation experiment show that DMD, RSM, and BPNN integrating SAA method are effective tools for the optimization of reinforced process. Furthermore, the scanning electron microscope (SEM) images show that the abundant debris are peeled off from the matrix materials and predominant delamination mechanisms and plastic deformation are shown on the worn surface after tribological behavior tests. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and antiproliferative evaluation of 2,3-diarylquinoline derivatives

A number of 2,3-diarylquinoline derivatives were synthesized and evaluated for antiproliferative activities against the growth of six cancer cell lines including human hepatocellular carcinoma (Hep G2 and Hep 3B), non-small cell lung cancer (A549 and H1299), and breast cancer (MCF-7 and MDA-MB-231) cell lines. The preliminary results indicated that 6-fluoro-2,3-bis{4-[2-(piperidin-1-yl)ethoxy]phenyl}quinoline (16b) was one of the most active compounds against the growth of Hep 3B, H1299, and MDA-MB-231 with a GI(50) value of 0.71, 1.46, and 0.72 μM respectively which was more active than tamoxifen. Further investigations have shown that 16b induced cell cycle arrest at G2/M phase followed by DNA fragmentation via an increase in the protein expression of Bad, Bax and decrease in Bcl-2, and PARP which consequently cause cell death.