海藻酸-磷脂微囊复合水凝胶的制备、表征及毒理学分析

采用薄膜分散法合成磷脂微囊,根据胶粒的双电层理论,通过在微囊中加入氯化锰、氯化钙和氯化镁电解质溶液,使微囊处于相对稳定的状态.研究发现加入氯化锰和氯化钙溶液,微囊胶体的粒径没有明显的变化,但加入一定浓度氯化镁溶液,其粒径明显变大.为了进一步增加磷脂微囊稳定性,将氯化锰、氯化钙、氯化镁磷脂微囊胶体分别与海藻酸钠(SA)溶液混合.结果表明,氯化镁与SA几乎不能形成水凝胶,氯化钙与SA形成水凝胶能力强于氯化锰.微囊胶体溶液中的磷脂酰丝氨酸(PS)可以与Ca~(2+)和Mg~(2+)键合形成PS-Ca~(2+)和PS-Mg~(2+),但不能与Mn~(2+)键合形成PS-Mn~(2+).对氯化钙磷脂微囊与海藻酸钠合成的复合水凝胶的形貌、溶胀率及细胞毒性进行了表征,结果表明,氯化钙与SA形成的水凝胶可以捕获胶体中磷脂微囊,且形貌规整,结构稳定,无细胞毒性.     

Research on taper zone coupling from single-core fiber to annular-core hollow beam fiber

Optical Review - We designed and manufactured a novel annular-core hollow beam fiber which could directly yield ring light with a central dark spot inside the beam employing MCVD technique and a...     

Evolution of downsized crescent-shaped dune in wind tunnel experiment

The migration of a downsized crescent-shaped dune was investigated in a wind tunnel experiment.Quantified upwind influx and vertical oscillation of the sand bed were introduced to modulate the saturation level of the sand flux above the dune surface to affect dune evolution.The evolution was recorded by top-view photography and then abstracted as the evolution of self-defined characteristic quantities using a digital image processing algorithm.The results showed that,in contrast to the case for spanwise quantities,the evolution of streamwise quantities corresponds to a linear increase in the modulation magnitude more positively and in a monotonic and convergent manner.In contrast with quantities on the windward face,the changes in quantities with respect to the horns were nonmonotonic with time and almost uncorrelated with the variation in modulation strength,which reveals the distinctiveness of leeside evolution.     

Modeling on an ecological food chain with recycling

We propose two nutrient-phytoplankton models with instantaneous and time delayed recycling, investigate the dynamics and examine the responses to model complexities. Instead of the familiar specific uptake rate and growth rate functions, we assume only that the nutrient uptake and phytoplankton growth rate functions are positive, increasing and bounded above. We use geometrical and analytical methods to find conditions for the existence of none, one, or at most two positive steady states and analyze the stability properties of each of these equilibria. With the variation of parameters, the system may lose its stability and bifurcation may occur. We study the occurrence of Hopf bifurcation and the possibility of stability switching. Numerical simulations illustrate the analytical results and provide further insight into the dynamics of the models, biological interpretations are given.     

Bilayer rGO-Based Photothermal Evaporator for Efficient Solar-Driven Water Purification[]**

Interfacial evaporation has emerged as a promising approach to produce freshwater. However, an urgent concern is that, due to the illegal discharge of industrial wastewater, most water bodies are polluted by trace volatile organic compounds (VOCs), which are easily volatilized and enriched in the collected water during the interfacial evaporation process. Herein, a bilayer photothermal evaporator was reasonably designed for contaminated water purification. The bottom hydrophilic rGO-sodium alginate (SA) sheets purposefully disintegrate water transport channels, thus quickly removing VOCs through physical adsorption. The rGO-SA-TiO₂ upper layer sufficiently absorbs incident light and therefore persistently generates reactive oxidizing species to degrade upward VOCs. Notably, the oriented microchannels inside the evaporator allow sustained light reflections to improve the utilization of solar energy. The evaporation rate can reach 1.63 kg m⁻² h⁻¹ with a considerably high VOC removal efficiency of up to 96 %. Such an integrated bilayer evaporator provides an effective strategy to obtain clean water via solar distillation.     

Design and Synthesis of a Ruthenium(II) Complex-Based Luminescent Probe for Highly Selective and Sensitive Luminescence Detection of Nitric Oxide

Nitric oxide (NO) is one of the most important intercellular signaling molecules, and plays important roles in various biological systems. In this work, a unique Ru^II complex, tris[(5-(4-methylamino-3-aminobenzylamino)-1,10-phenanthroline)] ruthenium(II) hexafluorophosphate [Ru(MAA-phen)₃][PF₆]₂, has been designed and synthesized as a luminescent probe for the detection of NO in aqueous media. The complex itself is almost non-luminescent, but can specifically react with NO under the aerobic conditions to afford its highly luminescent triazole derivative in aqueous media, [Ru(MTA-phen)₃]²⁺ (MTA-phen: methyl-trazolebenzylamino-1,10-phenanthroline), accompanied by a 302-fold increase in luminescence intensity at 598 nm with a 130 nm Stokes shift. The luminescence response of [Ru(MAA-phen)₃]²⁺ to NO is rapid, highly specific without interferences of other reactive oxygen/nitrogen species, and highly stable against the pH changes in the range of pH 4.5–9.5. These features enable [Ru(MAA-phen)₃]²⁺ to be used as a probe for the highly selective and sensitive luminescence detection of NO in weakly acidic, neutral, and weakly basic media.     

COUPLING EFFECTS OF VOID SHAPE AND VOID SIZE ON THE GROWTH OF AN ELLIPTIC VOID IN A FIBER-REINFORCED HYPER-ELASTIC THIN PLATE

The growth of a prolate or oblate elliptic micro-void in a fiber reinforced anisotropic incompressible hyper-elastic rectangular thin plate subjected to uniaxial extensions is studied within the framework of finite elasticity. Coupling effects of void shape and void size on the growth of the void are paid special attention to. The deformation function of the plate with an isolated elliptic void is given, which is expressed by two parameters to solve the differential equation. The solution is approximately obtained from the minimum potential energy principle. Deformation curves for the void with a wide range of void aspect ratios and the stress distributions on the surface of the void have been obtained by numerical computation. The growth behavior of the void and the characteristics of stress distributions on the surface of the void are captured. The combined effects of void size and void shape on the growth of the void in the thin plate are discussed. The maximum stresses for the void with different sizes and different void aspect ratios are compared.