比值光谱导数法同时测定铝合金中铁,铜,锌

用比值光谱－导数分光光度法，在ｐＨ５．５缓冲溶液中，利用金属－２－（５－溴－２－吡啶偶氮）－５－二乙氨基酚（５－Ｂｒ－ＰＡＤＡＰ）－ＯＰ三元络合物显色体系，对混合物中铁，铜，锌三组分进行了同时测定。合成试样５次测定回收率在９７．３％－１０４．４％之间。应用于铝合金中铁，铜，锌的测定，各６次测定的ＲＳＤ分别为３．６６％，１．３８％，２．０３％。     

(h4-Dibenzylideneacetone)pentamethylcyclopentadienylrhodium(I)

dibenzylideneacetone can act as a 1,4-diene in bonding to a single metal atom and this has been shown by the synthesis of (h⁴-dibenzylideneacetone)pentamethylcyclopentadienylrhodium(I).     

Multilevel structure of sludge flocs

In this work, the structure of two kaolin sludges and a waste activated sludge are investigated using both light-scattering and free-settling methods. Fractal dimensions estimated by the light-scattering and free-settling techniques (D(S) and D(F) respectively) differ significantly and support the hypothesis that naturally occurring aggregates possess a multilevel structure. A two-level floc structural model comprised of (i) a primary floc (of fractal dimension D(S)) consisting of primary particles and (ii) a secondary floc (of fractal dimension D(F)) consisting of the microflocs is proposed to interpret the experimental findings. The structural changes of sludge flocs before and after cationic flocculation are interpreted using the proposed two-level model.     

On-line analysis of polymer melt processes

Molten polymer process streams are difficult to analyze either in- or on-line because of sampling problems due to the high temperature and viscosity of the molten state. Real-time monitoring of chemical compositions in these processes can significantly improve safety and product quality and minimize process costs and waste. The information content of the mid-infrared spectrum combined with the recent development of rugged process Fourier transform (FT) IR spectrometers is stimulating the application of process FT-IR to industrial polymer melt processes. Sampling considerations for polymer melts are reviewed. Also, the use of FT-IR spectrometry for on-line measurements of the polymer composition for polymer blends and copolymers in the melt, and the question of how this information could be used to monitor and control the quality of the product given by the process are discussed.     

合成2—芳氧基—5—氟—3H—4—嘧啶酮的新方法

由２－氰－５－氟－３Ｈ－４－嘧啶酮和取代苯酚钠在常压下反应，合成了７个未见文献报道的２－芳氧基－５－氟－３Ｈ－４－嘧啶酮化合物，产率７０￣８７％，结构经ＩＲ、＾１Ｈ ＮＭＲ和ＭＳ证实。     

Vibrational energy relaxation dynamics of Si---H stretching modes on stepped H/Si(111) 1×1 surfaces

The vibrational energy relaxation rates of excited Si---H stretching modes on the monohydride steps of miscut H/Si(111) 1×1 surfaces are calculated using Bloch-Redfield theory combined with classical molecular dynamics (MD) simulation. The structure and vibrational frequencies of the surface are first investigated using the Car-Parrinello ab initio MD method. The calculated Si---Si---H bending frequencies and relaxed structures are then used to refine the empirical potential for the classical MD simulations. The lifetime of the excited Si---H stretching mode at the step is found to be shorter than the modes on the terrace. Both the magnitude and the trend of the calculated results agree well with the experimental measurement on the 9° monohydride stepped surface. The vibrational relaxation rate of the Si---H stretching modes on the 15° monohydride stepped surface are also calculated and predicted to have a slightly shorter lifetime than for the 9° surface.     

Determination of gas-oil miscibility conditions by interfacial tension measurements

Processes that inject gases such as carbon dioxide and natural gas have long been and still continue to be used for recovering crude oil from petroleum reservoirs. It is well known that the interfacial tension between the injected gas and the crude oil has a major influence on the efficiency of displacement of oil by gas. When the injected gas becomes miscible with the crude oil, which means that there is no interface between the injected and displaced phases or the interfacial tension between them is zero, the oil is displaced with maximum efficiency, resulting in high recoveries. This paper presents experimental measurements of interfacial tension between crude oil and natural gases (using a computerized drop shape analysis technique) as a function of pressure and gas composition at the temperature of the reservoir from which the crude oil was obtained. The point of zero interfacial tension was then identified from these measurements by extrapolation of data to determine minimum miscibility pressure (MMP) and minimum miscibility composition (MMC). The gas-oil miscibility conditions thus obtained from interfacial tension measurements have been compared with the more conventional techniques using slim-tube tests and rising-bubble apparatus as well as predictive correlations and visual observations. The miscibility pressures obtained from the new VIT technique were 3-5% higher than those from visual observations and agreed well with the slim-tube results as well as with the correlations at enrichment levels greater than 30 mol% C2+ in the injected gas stream. The rising bubble apparatus yielded significantly higher MMPs. This study demonstrates that the VIT technique is rapid, reproducible, and quantitative, in addition to providing visual evidence of gas-oil miscibility.     

Dimeric iron n-confused porphyrin complexes

A dimeric iron N-confused porphyrin, [Fe(NCTPP)]2 was obtained from the anaerobic reaction of Fe(NCTPP)Br with NaSePh while under aerobic conditions a hydroxo bridged iron dimer with Na bridging the outer-N atoms was obtained and oxygenation occurred on the inner core pyrrolic carbon to form a novel ONCTPP porphyrinic ring.     

Specific heat and Lindemann-like parameter of metallic clusters: mono- and polyvalent metals

The Brownian-type molecular dynamics simulation is revisited and applied to study the thermal and geometric properties of four mono- and two polyvalent metallic clusters. For the thermal property, we report the specific heat at constant volume CV and study the solid-liquid-like transition by scrutinizing its characteristic. For the geometric property, we calculate the root mean square relative bond-length fluctuation delta as a function of increasing temperature. The thermal change in delta reflects the movement of atoms and hence is a relevant parameter in understanding the phase transition in clusters. The simulated results for the CV of alkali and aluminum clusters whose ground state structures exhibit icosahedral symmetry generally show one phase transition. In contrast, the tetravalent lead is quite often seen to exhibit two phase transitions, a premelting process followed by a progressive melting. In connection with the premelting scenario, it is found here that those (magic number) clusters identified to be of lesser stability (among other stable ones) according to the second energy difference are clusters showing a greater possibility of undergoing premelting process. This energy criterion applies to aluminum clusters nAl=28 and 38. To delve further into the thermal behavior of clusters, we have analyzed also the thermal variation of deltaT and attempted to correlate it with CV(T). It turns out that the premelting (if exist) and melting temperatures of the smaller size clusters (n less, similar 50) extracted from CV do not always agree quantitatively with that deduced from delta.     

La0.8Ca0.2MnO3纳米线的制备及表征

利用Sol-gel法结合氧化铝模板技术制备了La0.8Ca0.2MnO3纳米线, 并研究了两种热处理方法对 La0.8Ca0.2MnO3纳米线结构和形貌的影响. 快速升温到800 ℃得到的La0.8Ca0.2MnO3纳米线较粗, 其直径大于氧化铝模板的孔径, 而经过缓慢升温到400 ℃预处理再升温到800 ℃得到的La0.8Ca0.2MnO3纳米线, 其直径和氧化铝模板的孔径相当, 都约为35 nm. X射线衍射和透射电镜分析结果表明, 两种方法得到的 La0.8Ca0.2MnO3纳米线都是具有钙钛矿结构的属于单斜晶系的多晶材料.