再谈静电能的损失

本文从暂态过程的角度和能流的观点分析和讨论电容器并联过程中能量的损失问题.     

高效液相色谱法测定金菊泡腾片中绿原酸的含量

采用Nucleosil C18(250mm×4.6mm,4.5μm)色谱柱,以甲醇-磷酸水溶液(pH=3.0)为流动相,其比例为25∶75,检测波长为327 nm,流速1.0 mL/min,柱温29 ℃,建立金菊泡腾片和双黄连口服液中绿原酸含量的高效液相色谱(HPLC)测定方法.绿原酸浓度在0.02-0.1 mg/mL与峰面积积分值呈良好的线性关系,A=0.9394C 0.3674(r=0.9991).该方法灵敏、简便、重现性好、结果准确,可用于金菊泡腾片中绿原酸含量的测定和产品质量控制.     

一种菲涅尔全息图的快速算法

通过分析菲涅尔全息图计算模型,发现大量的平方运算和三角函数运算是计算速度的瓶颈,提出了一种菲涅尔全息图的快速计算方法.根据菲涅尔全息图的数学模型,利用三角函数的和差化积公式,将全息图的数学模型变换为由仅与水平或垂直方向有关的独立分量,通过四则运算来表示.在菲涅尔全息图的计算中,用少量的三角函数、平方运算和大量的四则运算代替原来大量的三角函数和平方运算,减少了全息图的运算量.实验表明,采用该算法后全息图的计算速度提高了9倍以上.     

Precise half-life measurements for 38Ca and 39Ca

The half-lives of ³⁸Ca and ³⁹Ca have been measured at ISOLDE of CERN. The REXTRAP facility was used to prepare ultra-clean samples of radioactive nuclei for precision decay spectroscopy. ³⁸Ca is one of the T _z = - 1 , 0⁺ $ \rightarrow$ 0⁺ $ \beta$ -emitting nuclides used to determine the vector coupling constant of the weak interaction and the V_ud quark-mixing matrix element. The result obtained, T _1/2 = 443.8(19) ms, is four times more precise than the average of previous measurements. For ³⁹Ca , a half-life of T _1/2 = 860.7(10) ms is obtained, a result in agreement with the average value from the literature.     

Magnetic Manipulation of Massless Dirac Fermions in Graphene Quantum Dot

We have theoretically analyzed the quasibound states in a graphene quantum dot (GQD) with a magnetic flux Φ in the centre. It is shown that the two-fold time reversal degeneracy is broken and the quasibound states of GQD with positive/negative angular momentum shifted upwards /downwards with increasing the magnetic flux. The variation of the quasibound energy depends linearly on the magnetic flux, which is quite different from theparabolic relationship for Schrödinger electrons. The GQD's quasibound states spectrum shows an obvious Aharonov-Bohm (AB) oscillations with the magnetic flux. It is also shown that the quasibound state with energy equal to the barrier height becomes a bound state completely confined in GQD.     

5,10,15-三(五氟苯基)Corrole及其相似卟啉化合物的光物理特性

采用稳态和时间分辨的瞬态光谱技术对比研究了一种Corrole化合物5,10,15-三(五氟苯基)Corrole(FtsTPC)和一种卟啉化合物5,10,15,20-四(五氟苯基)卟啉(F20TPP)的光物理特性.结果表明:F15TPC的B带吸收峰较宽而F20TPP的强而窄,F15TPC的Q带有两个吸收峰而F20TPP有四个.F15TPC的荧光量子产率为0.15,荧光寿命为4.8 ns,F20TPP的荧光量子产率为0.05,荧光寿命为11.1 ns;与F20TPP相比F15TPC具有发光效率高、荧光寿命短的特点.F15TPC具有较大的发光速率常数和无辐射跃迁速率常数,这可能是由于F15TPC少了一个氟代苯基,致使其发色团本身的电子结构发生变化所致.另外空间结构的不对称性和非共面性也对其光物理性质有影响.     

Photoacoustic Doppler effect from flowing small light-absorbing particles

From the flow of a suspension of micrometer-scale carbon particles, the photoacoustic Doppler shift is observed. As predicted theoretically, the observed Doppler shift equals half of that in Doppler ultrasound and does not depend on the direction of laser illumination. This new physical phenomenon provides a basis for developing photoacoustic Doppler flowmetry, which can potentially be used for detecting fluid flow in optically scattering media and especially low-speed blood flow of relatively deep microcirculation in biological tissue.     

Dopant diffusion and surface morphology of vanadium implanted 4H-silicon carbide

The diffusion behaviours of vanadium implanted p- and n-type 4H-SiC are investigated by using the secondary ion mass spectrometry (SIMS). Significant redistribution, especially out-diffusion of vanadium towards the sample surface is not observed after 1650℃ annealing for both p- and n-type samples. Atomic force microscopy (AFM) is applied to the characterization of surface morphology, indicating the formation of continuous long furrows running in one direction across the wafer surface after 1650℃ annealing. The surface roughness results from the evaporation and re-deposition of Si species on the surface during annealing. The chemical compositions of sample surface are investigated using x-ray photoelectron spectroscopy (XPS). The results of C 1s and Si 2p core-level spectra are presented in detail to demonstrate the evaporation of Si from the wafer and the deposition of SiO₂ on the sample surface during annealing.     

A novel super-FEC code based on concatenated code for high-speed long-haul optical communication systems

The structures of the novel super forward error correction (Super-FEC) code type based on the concatenated code for high-speed long-haul optical communication systems are studied in this paper. The Reed-Solomon (RS) (255, 239) + Bose-Chaudhuri-Hocguenghem (BCH) (1023, 963) concatenated code is presented after the characteristics of the concatenated code and the two Super-FEC code type presented in ITU-T G.975.1 have theoretically been analyzed, the simulation result shows that this novel code type, compared with the RS (255, 239) + convolutional-self-orthogonal-code (CSOC) (k₀/n₀ = 6/7, J = 8) code in ITU-T G.975.1, has a lower redundancy and better error-correction capabilities, and its net coding gain (NCG) at the third iteration is 0.57 dB more than that of RS (255, 239) + CSOC (k₀/n₀ = 6/7, J = 8) code in ITU-T G.975.1 at the third iteration for the bit error rate (BER) of 10⁻¹². Therefore, the novel code type can better be used in long-haul, larger capacity and higher bit-rate optical communication systems. Furthermore, the design and implementation of the novel concatenated code type are also discussed.     

Development of an integrated optical system for warpage and hermeticity test of microdisplay

We have developed an integrated optical system to measure the warpage of a microdisplay product at post-packaging die-attach temperature and to test its hermeticity after manufacturing. This system is constructed based on the principle of Twyman/Green (T/G) interferometry and Newton interferometry. T/G interferometry is used to characterize warpage of the microdisplay's base-plate, while Newton interferometry is used to characterize the gap variance between face-plate and base-plate of the microdisplay. With these measurements, deformation and shape of the microdisplay can be comprehensively determined during its manufacturing process, which is critical for its quality test and reliability evaluation. Delicate mechanical system was designed to facilitate the optics integration and alignment. To evaluate the performance of the optical system itself, warpage of a sample was re-measured with Tailor–Hobson profilometer whose resolution is 10 nm, the results from these two testing systems agree well with each other. Some application examples of the integrated testing system were presented to verify its work efficiency.